参数资料
型号: M32180F8TFP
元件分类: 微控制器/微处理器
英文描述: 32-BIT, FLASH, 80 MHz, RISC MICROCONTROLLER, PQFP240
封装: 32 X 32 MM, 0.50 MM PITCH, PLASTIC, QFP-240
文件页数: 42/139页
文件大小: 3774K
代理商: M32180F8TFP
6
6-7
INTERNAL MEMORY
32180 Group User’s Manual (Rev.1.0)
6.4 Registers Associated with the Internal Flash Memory
6.4.4 Flash Control Registers
Flash Control Register 1 (FCNT1)
<Address: H’0080 01E2>
123456
b7
b0
FEMMOD
FENTRY
0
<After reset: H’00>
b
Bit Name
Function
R
W
0–2
No function assigned. Fix to "0".
00
3
FENTRY
0: Normal read
R
W
Flash E/W enable mode entry bit
1: Program/erase enable
4–6
No function assigned. Fix to "0".
00
7
FEMMOD
0: Normal mode
R
W
Virtual flash emulation mode bit
1: Virtual flash emulation mode
Flash Control Register 1 (FCNT1) consists of the following two bits to control the internal flash memory.
(1) FENTRY (Flash Mode Entry) bit (Bit 3)
The FENTRY bit controls entry to flash E/W enable mode. Flash E/W enable mode can only be entered when
FENTRY = "1".
To set the FENTRY bit to "1", write "0" and then "1" to the FENTRY bit in succession while the FP pin = "high". To
clear the FENTRY bit, check to see that the FSTAT1 register FSTAT bit = "1" (ready) and then write "0" to the
FENTRY bit.
Note that the following operations cannot be performed while programming or erasing the internal flash
memory (FSTAT1 register FSTAT bit = "0" (busy)). If one of these operations is attempted, the FENTRY bit
is cleared to "0" in hardware.
1) Writing "0" to the FENTRY bit
2) Entering a low-level signal to the FP pin
3) Entering a low-level signal to the RESET# pin
When running a program resident in the internal flash memory while the FENTRY bit = "0", the EI vector entry
is located at the address H’0000 0080 of the internal flash memory. When running the flash write/erase
program in the RAM while the FENTRY bit = "1", the EI vector entry is located at the address H’0080 4000 of
the RAM, allowing the flash programming/erase operation to be controlled using interrupts.
Table 6.4.1 Changes of the EI Vector Entry by FENTRY
FENTRY
EI Vector Entry
Address
0
Internal flash memory area
H'0000 0080
1
Internal RAM area
H'0080 4000
(2) FEMMOD (Virtual Flash Emulation Mode) bit (Bit 7)
The FEMMOD bit controls entry to virtual flash emulation mode. Virtual flash emulation mode is entered by
setting the FEMMOD bit to "1" while the FENTRY bit = "0". (For details, see Section 6.6, “Virtual Flash
Emulation Function.”)
相关PDF资料
PDF描述
M38002M2-XXXFP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PQFP64
M30623MAA-XXXGP 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP80
M37753M6C-XXXHP 16-BIT, MROM, 40 MHz, MICROCONTROLLER, PQFP80
M38867E8A-XXXHP 8-BIT, OTPROM, 5 MHz, MICROCONTROLLER, PQFP80
M38867M8A-XXXHP 8-BIT, MROM, 5 MHz, MICROCONTROLLER, PQFP80
相关代理商/技术参数
参数描述
M32180F8VFP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:32-Bit RISC Single-Chip Microcomputers M32R Family M32R/ECU Series
M32180T2-PTC 功能描述:DEV CONNECTION CNVTR FOR 32180 G RoHS:否 类别:编程器,开发系统 >> 配件 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program RoHS指令信息:IButton RoHS Compliance Plan 标准包装:1 系列:- 附件类型:USB 至 1-Wire? RJ11 适配器 适用于相关产品:1-Wire? 设备 产品目录页面:1429 (CN2011-ZH PDF)
M32182F3TFP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:32-BIT RISC SINGLE-CHIP MICROCOMPUTER M32R FAMILY / M32R/ECU SERIES
M32182F3UFP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:32-BIT RISC SINGLE-CHIP MICROCOMPUTER M32R FAMILY / M32R/ECU SERIES
M32182F3VFP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:32-BIT RISC SINGLE-CHIP MICROCOMPUTER M32R FAMILY / M32R/ECU SERIES