参数资料
型号: M32180F8TFP
元件分类: 微控制器/微处理器
英文描述: 32-BIT, FLASH, 80 MHz, RISC MICROCONTROLLER, PQFP240
封装: 32 X 32 MM, 0.50 MM PITCH, PLASTIC, QFP-240
文件页数: 7/139页
文件大小: 3774K
代理商: M32180F8TFP
4
4-15
EIT
32180 Group User’s Manual (Rev.1.0)
4.9 Interrupt Processing
4.9.1 Reset Interrupt (RI)
[OccurrenceConditions]
A reset interrupt is unconditionally accepted in any machine cycle by pulling the RESET# input signal low.
The reset interrupt is assigned the highest priority among all EITs.
[EIT Processing]
(1) Initializing SM, IE and C bits
The PSW register’s SM, IE and C bits are initialized as shown below.
SM
0
IE
0
C
0
For the reset interrupt, the values of SM, IE and C bits are undefined.
(2) Branching to the EIT vector entry
The CPU branches to the address H’0000 0000 in the user space. However, when operating in boot mode,
the CPU jumps to the boot program. For details, see Section 6.5, “Programming the Internal Flash Memory.”
(3) Jumping from the EIT vector entry to the user program
The CPU executes the instruction written by the user at the address H’0000 0000 of the EIT vector entry. In
the reset vector entry, be sure to initialize the PSW and SPI registers before jumping to the start address of
the user program.
4.9.2 System Break Interrupt (SBI)
System Break Interrupt (SBI) is an emergency interrupt which is used when power outage is detected or a fault
condition is notified by an external watchdog timer. The system break interrupt cannot be masked by the PSW
register IE bit.
Therefore, the system break interrupt can only be used when the system has some fatal event already existing in
it when the interrupt is detected. Also, this interrupt must be used on condition that after processing by the SBI
handler, control will not return to the program that was being executed when the system break interrupt occurred.
[OccurrenceConditions]
A system break interrupt is accepted by a falling edge on SBI# input pin. (The system break interrupt cannot
be masked by the PSW register IE bit.)
In no case will a system break interrupt be activated immediately after executing a 16-bit instruction that
starts from a word boundary. (For 16-bit branch instructions, however, the interrupt is accepted immediately
after branching.) Note also that because of the instruction processing-completed type, a system break
interrupt is accepted after the instruction is completed.
相关PDF资料
PDF描述
M38002M2-XXXFP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PQFP64
M30623MAA-XXXGP 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP80
M37753M6C-XXXHP 16-BIT, MROM, 40 MHz, MICROCONTROLLER, PQFP80
M38867E8A-XXXHP 8-BIT, OTPROM, 5 MHz, MICROCONTROLLER, PQFP80
M38867M8A-XXXHP 8-BIT, MROM, 5 MHz, MICROCONTROLLER, PQFP80
相关代理商/技术参数
参数描述
M32180F8VFP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:32-Bit RISC Single-Chip Microcomputers M32R Family M32R/ECU Series
M32180T2-PTC 功能描述:DEV CONNECTION CNVTR FOR 32180 G RoHS:否 类别:编程器,开发系统 >> 配件 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program RoHS指令信息:IButton RoHS Compliance Plan 标准包装:1 系列:- 附件类型:USB 至 1-Wire? RJ11 适配器 适用于相关产品:1-Wire? 设备 产品目录页面:1429 (CN2011-ZH PDF)
M32182F3TFP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:32-BIT RISC SINGLE-CHIP MICROCOMPUTER M32R FAMILY / M32R/ECU SERIES
M32182F3UFP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:32-BIT RISC SINGLE-CHIP MICROCOMPUTER M32R FAMILY / M32R/ECU SERIES
M32182F3VFP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:32-BIT RISC SINGLE-CHIP MICROCOMPUTER M32R FAMILY / M32R/ECU SERIES