参数资料
型号: MC68EN302CPV20BT
厂商: FREESCALE SEMICONDUCTOR INC
元件分类: 微控制器/微处理器
英文描述: 4 CHANNEL(S), 10M bps, LOCAL AREA NETWORK CONTROLLER, PQFP144
封装: 20 X 20 MM, 1.40 MM HEIGHT, 0.50 MM PITCH, PLASITC, LQFP-144
文件页数: 67/128页
文件大小: 641K
代理商: MC68EN302CPV20BT
ETHERNET Controller
4-4
MC68EN302 REFERENCE MANUAL
MOTOROLA
This read only field is the buffer descriptor number that was being accessed when a bus
error occurred. See 4.1.5 Interrupt Event Register (INTR_EVENT) for a description of the
bus error handling.
Bit 8—Reserved. Should be written to zero by the host processor. This bit is always read as
zero.
BDSIZE1-0—Buffer descriptor size. (R/W)
00 = 8 transmit buffer descriptors, 120 receive buffer descriptors
01 = 16 transmit buffer descriptors, 112 receive buffer descriptors
10 = 32 transmit buffer descriptors, 96 receive buffer descriptors
11 = 64 transmit buffer descriptors, 64 receive buffer descriptors
BDSIZE controls the allocation of the44 128 on-chip buffer descriptors between the
transmit and receive operations. Typical implementations will set BDSIZE(1–0) to 01
allowing 16 transmit buffer descriptors and 112 receive descriptors.
TSRLY—Transmit start early. (R/W)
TSRLY controls when the transmission of a frame will begin. Typical applications will set
TSRLY to 0.
0 = Frames do not begin transmitting until the transmit FIFO has only WMRK bytes
available (empty), where WMRK ranges from 96 to 120 bytes.
1 = The frame will begin transmitting after the WMRK number of bytes have been
written to the transmit FIFO where WMRK ranges from 8 to 32 bytes. This requires
low bus latency to avoid transmit FIFO underrun.
WMRK1–0—FIFO Watermark. (R/W)
00 = 8 FIFO bytes present or available
01 = 16 FIFO bytes present or available
10 = 24 FIFO bytes present or available
11 = 32 FIFO bytes present or available
The FIFO Watermark is used to control the start of a DMA burst. In the receive direction, the
DMA state machine waits for either an end-of-frame (EOF) or a WMRK number of bytes to
be in the receive FIFO prior to beginning a DMA burst of data out of the MC68EN302 to the
host bus. In the transmit direction, the DMA state machine waits for WMRK number of bytes
TSRLY
WMRK<1:0>
BYTES IN TRANSMIT FIFO AT
START OF TRANSMISSION
0
00
120
001
112
0
10
104
011
96
100
8
101
16
110
24
111
32
相关PDF资料
PDF描述
MC68302FC20CR2 4 CHANNEL(S), 10M bps, LOCAL AREA NETWORK CONTROLLER, PQFP132
MC68302FC16CR2 4 CHANNEL(S), 10M bps, LOCAL AREA NETWORK CONTROLLER, PQFP132
MC68LC302PU20CT 4 CHANNEL(S), 10M bps, LOCAL AREA NETWORK CONTROLLER, PQFP100
MC68EN302PV25BT 4 CHANNEL(S), 10M bps, LOCAL AREA NETWORK CONTROLLER, PQFP144
MC68302PV33C 4 CHANNEL(S), 10M bps, LOCAL AREA NETWORK CONTROLLER, PQFP144
相关代理商/技术参数
参数描述
MC68EN302PV20 制造商:MOTOROLA 制造商全称:Motorola, Inc 功能描述:Integrated Multiprotocol Processor with Ethernet
MC68EN302PV20BT 功能描述:IC MPU MULTI-PROTOCOL 144-LQFP RoHS:否 类别:集成电路 (IC) >> 嵌入式 - 微处理器 系列:M683xx 标准包装:2 系列:MPC8xx 处理器类型:32-位 MPC8xx PowerQUICC 特点:- 速度:133MHz 电压:3.3V 安装类型:表面贴装 封装/外壳:357-BBGA 供应商设备封装:357-PBGA(25x25) 包装:托盘
MC68EN302PV25 制造商:MOTOROLA 制造商全称:Motorola, Inc 功能描述:Integrated Multiprotocol Processor with Ethernet
MC68EN302PV25BT 功能描述:IC MPU MULTI-PROTOCOL 144-LQFP RoHS:否 类别:集成电路 (IC) >> 嵌入式 - 微处理器 系列:M683xx 标准包装:2 系列:MPC8xx 处理器类型:32-位 MPC8xx PowerQUICC 特点:- 速度:133MHz 电压:3.3V 安装类型:表面贴装 封装/外壳:357-BBGA 供应商设备封装:357-PBGA(25x25) 包装:托盘
MC68EN360AI25L 功能描述:微处理器 - MPU QUICC ETHRN RoHS:否 制造商:Atmel 处理器系列:SAMA5D31 核心:ARM Cortex A5 数据总线宽度:32 bit 最大时钟频率:536 MHz 程序存储器大小:32 KB 数据 RAM 大小:128 KB 接口类型:CAN, Ethernet, LIN, SPI,TWI, UART, USB 工作电源电压:1.8 V to 3.3 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:FBGA-324