参数资料
| 型号： | NCP1015ST65T3G |
| 厂商： | ON Semiconductor |
| 文件页数： | 12/22页 |
| 文件大小： | 0K |
| 描述： | IC OFFLINE SWIT SMPS CM SOT223 |
| 标准包装： | 4,000 |
| 输出隔离： | 隔离 |
| 频率范围： | 59kHz ~ 71kHz |
| 输入电压： | 8.1 V ~ 10 V |
| 输出电压： | 700V |
| 功率（瓦特）： | 19W |
| 工作温度： | -40°C ~ 125°C |
| 封装/外壳： | TO-261-4，TO-261AA |
| 供应商设备封装： | SOT-223 |
| 包装： | 带卷 (TR) |
NCP1015
100%
Peak current
at nominal power
Skip ? cycle
current limit
25%
Figure 19. Low Peak Current Skip ? Cycle Guarantees Noise ? Free Operation
Full power operation involves the nominal switching
frequency and thus avoids any noise when running.
Experiments carried on a 5 W universal mains board
unveiled a standby power of 300 mW @ 230 Vac with the
DSS activated and dropped to less than 100 mW when an
auxiliary winding is connected.
Frequency Jittering for Improved EMI Signature
By sweeping the switching frequency around its nominal
value, it spreads the energy content on adjacent frequencies
rather than keeping it centered in one single ray. This offers
the benefit to artificially reduce the measurement noise on
a standard EMI receiver and pass the tests more easily. The
EMI sweep is implemented by routing the V CC ripple
(induced by the DSS activity) to the internal oscillator. As a
result, the switching frequency moves up and down to the
DSS rhythm. Typical deviation is ± 4% of the nominal
frequency. With a 1 V peak ? to ? peak ripple, the frequency
will equal 65 kHz in the middle of the ripple and will
increase as V CC rises or decrease as V CC ramps down.
Figure 20 shows the behavior we have adopted:
V CC Ripple
62.4 kHz
VCC ON
VCC OFF
65 kHz
67.6 kHz
Internal Sawtooth
Figure 20. The V CC Ripple Causes the Frequency Jittering on the Internal Oscillator Saw ? tooth
(65 kHz version)
http://onsemi.com
12
相关PDF资料 |
PDF描述 |
|---|---|
| NCP1034DR2G | IC REG CTRLR BUCK PWM VM 16-SOIC |
| NCP1086D2TADJR4G | IC REG LDO ADJ 1.5A D2PAK-3 |
| NCP1117LPST18T3G | IC REG LDO 1.8V 1A SOT-223-4 |
| NCP112PG | IC SUPERVISORY PS DESKTOP 14DIP |
| NCP1200D60R2 | IC CTRLR PWM CM 8SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| NCP102 | 制造商:ONSEMI 制造商全称:ON Semiconductor 功能描述:Low Dropout Linear Regulator Controller |
| NCP1027 | 制造商:ONSEMI 制造商全称:ON Semiconductor 功能描述:Power Factor Controllers |
| NCP1027ATXEVB | 制造商:ON Semiconductor 功能描述:NCP1027 10W STANDBY ATX - Bulk |
| NCP1027ATXGEVB | 功能描述:电源管理IC开发工具 NCP1027 10W STANDBY ATX RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V |
| NCP1027P065G | 功能描述:电流型 PWM 控制器 PWM Current Mode Controller RoHS:否 制造商:Texas Instruments 开关频率:27 KHz 上升时间: 下降时间: 工作电源电压:6 V to 15 V 工作电源电流:1.5 mA 输出端数量:1 最大工作温度:+ 105 C 安装风格:SMD/SMT 封装 / 箱体:TSSOP-14 |
发布紧急采购，3分钟左右您将得到回复。