参数资料
型号: ORT82G51BM680-DB
厂商: LATTICE SEMICONDUCTOR CORP
元件分类: FPGA
英文描述: FPGA, 1296 CLBS, 380000 GATES, PBGA680
封装: PLASTIC, FBGA-680
文件页数: 33/109页
文件大小: 1379K
代理商: ORT82G51BM680-DB
Lattice Semiconductor
3
Data Sheet
April, 2002
8b/10b SERDES Backplane Interface FPSC
ORCA ORT82G5 1.0-1.25/2.0-2.5/3.125-3.5 Gbits/s
Embedded Function Features
High-speed SERDES with programmable serial data
rates including 1.0 Gbits/s, 1.25 Gbits/s, 2.5 Gbits/s,
3.125 Gbits/s, and 3.5 Gbits/s. Operation has been
demonstrated on design tolerance devices at
4.25 Gbits/s across 20 in. of FR-4 backplane and at
3.2 Gbits/s across 40 in. of FR-4 backplane.
Asynchronous operation per receive channel with the
receiver frequency tolerance based on one reference
clock per quad channels (separate PLL per channel).
Ability to select full-rate or half-rate operation per Tx
or Rx channel by setting the appropriate control reg-
isters.
Programmable one-half amplitude transmit mode for
reduced power in chip-to-chip application.
Transmit preemphasis (programmable) for improved
receive data eye opening.
Receiver energy detector to determine if a link is
active. Optional automatic power-down for inactive
channels.
32-bit (8b/10b) or 40-bit (raw data) parallel internal
bus for data processing in FPGA logic.
Provides a 10 Gbits/s backplane interface to switch
fabric with protection. Also supports port cards at
40 Gbits/s or 2.5 Gbits/s.
3.125 Gbits/s SERDES compliant with XAUI serial
data specication for 10 Gbit Ethernet applications
with protection.
Most XAUI features for 10 Gbit Ethernet are embed-
ded including the required link state machine.
Compliant to bre-channel physical layer specica-
tion.
High-speed interface (HSI) function for clock/data
recovery serial backplane data transfer without exter-
nal clocks.
Eight-channel HSI function provides 2.5 Gbits/s
serial user data interface per channel for a total chip
bandwidth of 20 Gbits/s (full duplex).
SERDES has low-power CML buffers. Support for
1.5 V/1.8 V I/Os. Allows use with optical transceiver,
coaxial copper media, shielded twisted pair wiring or
high-speed backplanes such as FR-4.
Powerdown option of SERDES HSI receiver or trans-
mitter on a per-channel basis.
Automatic lock to reference clock in the absence of
valid receive data.
Per channel PRBS generator and checker.
High-speed (serial) and low-speed (parallel) loop-
back test modes.
Requires no external component for clock recovery
and frequency synthesis.
SERDES characterization pins available to control/
monitor the internal interface to one SERDES quad
macro.
SERDES HSI automatically recovers from loss-of-
clock once its reference clock returns to normal oper-
ating state.
Built-in boundary scan (IEEE 1149.1 and 1149.2
JTAG) for the programmable I/Os, not including the
SERDES interface.
FIFOs align incoming data across all eight channels
(all eight channels, two groups of four channels, or
four groups of two channels). Alignment is done
using comma characters or /A/ character in XAUI
mode. Optional ability to bypass alignment FIFOs for
asynchronous operation between channels. (Each
channel includes its own clock and frame pulse or
comma detect.)
Addition of two 4K X 36 dual-port RAMs with access
to the programmable logic.
Pinout compatible to the ORCA ORSO82G5 SONET
backplane driver FPSC in the 680 PBGAM package.
Intellectual Property Features
Programmable logic provides a variety of yet-to-be
standardized interface functions, including the following
Lattice IP core functions:
10 Gbits/s Ethernet as dened by IEEE 802.3ae:
— XGMII for interfacing to 10 Gbits/s Ethernet MACs
(media access controller). XGMII is a 156 MHz
double data rate parallel short reach (typically
less than 2") interconnect interface.
— XAUI to XGMII translator (XGXS), including sup-
port for dual XAUI ports for 1 + 1 XAUI protection.
POS-PHY4 interface for 10 Gbits/s SONET/SDH and
OTN systems and some 10 Gbits/s Ethernet systems
to allow easy integration of InniBand, bre-channel,
and 10 Gbits/s Ethernet in data over bre applica-
tions.
Ethernet MAC functions at 10/100 Mbits/s, 1 Gbits/s,
and 10 Gbits/s.
Backplane drivers for industry standard products,
including 2.5 Gbits/s and 10Gbps Network Proces-
sors and 2.5Gbps and 10Gbps Switch fabrics such
as the Pi-family (Pi-X, Pi-C).
Other functions such as bre-channel (including bre
channel XAUI) and InniBand link layer IP cores are
also planned.
XAUI interface to emerging RPR (resilient packet
ring) MAC solution.
相关PDF资料
PDF描述
OSC-1B1FREQ TCVCXO, CLIPPED SINE OUTPUT, 10 MHz - 50 MHz
OSC-3A110MHZ TCVCXO, CLIPPED SINE OUTPUT, 10 MHz
OSC-3B219.68MHZ TCVCXO, CLIPPED SINE OUTPUT, 19.68 MHz
OSC1213A TCVCXO, SINE OUTPUT, 13 MHz
OSC1218D TCVCXO, SINE OUTPUT, 12.8 MHz
相关代理商/技术参数
参数描述
ORT82G5-1BM680I 功能描述:FPGA - 现场可编程门阵列 10368 LUT 372 I/O RoHS:否 制造商:Altera Corporation 系列:Cyclone V E 栅极数量: 逻辑块数量:943 内嵌式块RAM - EBR:1956 kbit 输入/输出端数量:128 最大工作频率:800 MHz 工作电源电压:1.1 V 最大工作温度:+ 70 C 安装风格:SMD/SMT 封装 / 箱体:FBGA-256
ORT82G5-1F680C 功能描述:FPGA - 现场可编程门阵列 ORCA FPSC 3.7GBITS/s BP XCVR 643K RoHS:否 制造商:Altera Corporation 系列:Cyclone V E 栅极数量: 逻辑块数量:943 内嵌式块RAM - EBR:1956 kbit 输入/输出端数量:128 最大工作频率:800 MHz 工作电源电压:1.1 V 最大工作温度:+ 70 C 安装风格:SMD/SMT 封装 / 箱体:FBGA-256
ORT82G5-1F680I 功能描述:FPGA - 现场可编程门阵列 ORCA FPSC 2.7Gbits/s BP XCVR 643K RoHS:否 制造商:Altera Corporation 系列:Cyclone V E 栅极数量: 逻辑块数量:943 内嵌式块RAM - EBR:1956 kbit 输入/输出端数量:128 最大工作频率:800 MHz 工作电源电压:1.1 V 最大工作温度:+ 70 C 安装风格:SMD/SMT 封装 / 箱体:FBGA-256
ORT82G5-1FN680C 功能描述:FPGA - 现场可编程门阵列 ORCA FPSC 1.5V 3.7 G b Bpln Xcvr 643K Gt RoHS:否 制造商:Altera Corporation 系列:Cyclone V E 栅极数量: 逻辑块数量:943 内嵌式块RAM - EBR:1956 kbit 输入/输出端数量:128 最大工作频率:800 MHz 工作电源电压:1.1 V 最大工作温度:+ 70 C 安装风格:SMD/SMT 封装 / 箱体:FBGA-256
ORT82G5-1FN680C1 功能描述:FPGA - 现场可编程门阵列 10368 LUT 372 I/O RoHS:否 制造商:Altera Corporation 系列:Cyclone V E 栅极数量: 逻辑块数量:943 内嵌式块RAM - EBR:1956 kbit 输入/输出端数量:128 最大工作频率:800 MHz 工作电源电压:1.1 V 最大工作温度:+ 70 C 安装风格:SMD/SMT 封装 / 箱体:FBGA-256