2: FEATURES
1-2
EPSON
S1D13806 SERIES HARDWARE FUNCTIONAL
SPECIFICATION (X28B-A-001-03)
2FEATURES
Table 2-1 S1D13806 Features
S1D13806 Features
Embedded Memory
1280K byte embedded synchronous DRAM.
Up to 50MHz data rate (100M Bytes/second).
Display buffer address space is directly and contiguously avail-
able through the 21-bit address bus.
Display Modes
4/8/16 bit-per-pixel (bpp) color depths.
Up to 64K colors on TFT,CRT and TV.
Up to 64K colors in 16 bpp mode on color passive LCD panels
using dithering (4096 colors in 4/8 bpp).
Up to 64 shades of gray on monochrome passive panels using
Frame Rate Modulation (FRM) and Dithering.
4/8 bit-per-pixel color depths are mapped using three 256x4
Look-Up Tables (LUT).
Separate LUTs for LCD and CRT/TV.
16 bit-per-pixel modes are mapped directly bypassing the LUT.
CPU Interfaces
Epson E0C33.
Hitachi SH-4.
Hitachi SH-3.
MIPS/ISA.
Motorola MC68000.
Motorola MC68030.
Motorola PowerPC MPC82x.
MPU bus interface with programmable READY.
NEC MIPS VR41xx.
PC Card (PCMCIA).
Philips MIPS PR31500/PR31700.
StrongARM (PC Card).
Toshiba MIPS TX39xx.
One-stage write buffer for minimum wait-state CPU writes.
Registers are memory-mapped – M/R# pin selects between dis-
play buffer and register address space.
Display Features
SwivelView: 90°, 180°, 270° hardware rotation of display
image.
EPSON Independent Simultaneous Display (EISD): displays
independent images on different displays (CRT or TV and pas-
sive or TFT panel).
Virtual Display Support: displays images larger than the physical
display size through the use of panning and scrolling.
2D BitBLT Engine.
Hardware Cursor/Ink Layer: separate 64x64x2 hardware cursor
or 2-bit ink layer for both LCD and CRT/TV.
Double Buffering/Multi-pages: for smooth animation and instan-
taneous screen update.
Display Support
4/8-bit monochrome or 4/8/16-bit color LCD interface for single-
panel, single-drive displays.
8-bit monochrome or 8/16-bit color LCD interface for dual-panel,
dual-drive displays.
Direct support for 9-bit, 12-bit, 18-bit, 2x9-bit, 2x12-bit TFT/D-
TFD.
Direct support for CRT.
Direct support for S-Video/Composite TV output (NTSC or PAL
format).
Miscellaneous
Power save mode is initiated by software.
Built-in MediaPlug Interface for Winnov Camera.
Highly Flexible Clocking.
Eight configuration pins (CONF[7:0]) are used to configure the
chip at power-on.
13 General Purpose Input/Output pins.
Operating voltage from 3.0 volts to 3.6 volts.
144-pin QFP20 package.