收藏本站
参数资料
型号： SI3015-F-FS
厂商： Silicon Laboratories Inc
文件页数： 83/94页
文件大小： 0K
描述： IC ISOMODEM LINE-SIDE DAA 16SOIC
标准包装： 48
系列： ISOmodem®
数据格式： V.90
波特率： 2.4k
电源电压： 3.3V，5V
安装类型： 表面贴装
封装/外壳： 16-SOIC（0.154"，3.90mm 宽）
供应商设备封装： 16-SOIC N
包装： 管件
Si2400
84
Rev. 1.3
APPENDIX B—
TYPICAL MODEM APPLICATIONS EXAMPLES
Introduction
Appendix B outlines the steps required to configure the
Si2400 for modem operation under typical examples.
The ISOmodem has been designed to be both easy to
use and flexible. The Si2400 has many features and
modes, which add to the complexity of the device, but
are not required for a typical modem configuration. The
goal of this appendix is to help the user to quickly make
a modem connection and begin evaluation of the
Si2400 under various operational examples.
Example 1: V.22bis in FCC countries
1. Power on reset
2. Set Host UART to 2400 bps
3. ATS07=06 set for QAM 2400 bps
4. ATDT18005551212<CR>
Si2400 may echo the following:
t – tone dial detected
, – dialing complete
r – ringback
b – busy tone
N – No carrier
c – connect
d – connect at 1200bps
5. Next byte after “c” or “d” is modem data!
Example 2: V.22 in CTR21 countries
1. Power on reset
2. Set Host UART to 2400 bps with CTS flow control
3. ATS07=02 (set for DPSK 1200 bps)
4. ATSF5=1C (set DAA for CTR21)
5. ATSF7=18 (set DAA for CTR21)
6. ATDT18005551212<CR>
Si2400 may echo the following:
t – tone dial detected
, – dialing complete
r – ringback
b – busy tone
N – No carrier
c – connect
7. Next byte after “c” is modem data!
Example 3: Bell 103 in Australia
1. Power on reset
2. Set Host UART to 2400 bps with CTS flow control
3. ATS07=01 (set for FSK 300 bps)
4. ATSF5=38 (set DAA for Australia)
5. ATDT18005551212<CR>
Si2400 may echo the following:
t – tone dial detected
, – dialing complete
r – ringback
b – busy tone
N – No carrier
c – connect
6. Next byte after “c” is modem data!
Example 4: Bell 103 in Australia with
Parallel Phone Detect
1. Power on reset
2. Set Host UART to 2400 bps with CTS flow control
3. ATS07=01 (set for FSK 300 bps)
4. ATSF5=38 (set DAA for Australia)
5. ATSE2=C0 (enable ALERT pin)
6. ATDT18005551212<CR>
Si2400 may echo the following:
t – tone dial detected
, – dialing complete
r – ringback
b – busy tone
N – No carrier
c – connect
7. Next byte after “c” is modem data!
Example 5: Bell 212A in South Korea with
Japanese caller ID
1. Power on reset
2. Set Host UART to 2400 bps with CTS flow control
3. ATS07=00 (set for DPSK 1200 bps)
4. ATSF5=06(set DAA for South Korea)
5. ATS13=80 (set caller ID to Japanese format)
When caller ID data is detected, Si2400 will echo “f”
indicating the line reversal, “m” indicating the mark, and
then caller ID data will follow.
6. ATDT18005551212<CR>
-Si2400 may echo:
t – tone dial detected
, – dialing complete
r – ringback
b – busy tone
N – No carrier
c – connect
7. Next byte after “c” is modem data!
相关PDF资料
PDF描述
SI3050-E1-FM IC VOICE DAA SYSTEM SIDE 24QFN
JBXEA2G07FSSDS CONN RCPT 7POS DOUBLE NUT SOLDER
VE-J6V-IY-B1 CONVERTER MOD DC/DC 5.8V 50W
VE-J6T-IY-B1 CONVERTER MOD DC/DC 6.5V 50W
VE-2NX-IX-F1 CONVERTER MOD DC/DC 5.2V 75W
相关代理商/技术参数
参数描述
SI3015-F-FSR 制造商:Silicon Laboratories Inc 功能描述:Modem Chip Chipset 2.4Kbps 16-Pin SOIC T/R 制造商:Silicon Laboratories Inc 功能描述:MODEM CHIP CHIPSET ISOMODEM 2.4KBPS 16SOIC - Tape and Reel 制造商:Silicon Laboratories 功能描述:Modem Chip Chipset 2.4Kbps 16-Pin SOIC T/R
SI3015-FS 功能描述:IC ISOMODEM LINE-SIDE DAA 16SOIC RoHS:是 类别:集成电路 (IC) >> 接口 - 调制解调器 - IC 和模块 系列:ISOmodem® 标准包装:25 系列:- 数据格式:V.21，V.22，V.23，V.29，V.32，V.34，V.90，V.92，Bell 103，Bell 212A 波特率:33.6k 电源电压:3.3V 安装类型:- 封装/外壳:- 供应商设备封装:- 包装:托盘 配用:591-1013-ND - KIT DEV SOCKETMODEM PARALLEL591-1009-ND - KIT DEV SRL SOCKETMODEM UNIVERSL 其它名称:MT5656SMI-P-V-34.R2-SPMT5656SMI-P-V-34.R2-SP-NDQ4711574
SI3015-FSR 制造商:Silicon Laboratories Inc 功能描述:SI2403 ISOMODEM LINE-SIDE LEAD-FREE SOIC 0 TO 70 DEG. C - Tape and Reel
SI3015-KS 功能描述:电信线路管理 IC SI2400 Line Side RoHS:否 制造商:STMicroelectronics 产品:PHY 接口类型:UART 电源电压-最大:18 V 电源电压-最小:8 V 电源电流:30 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 安装风格:SMD/SMT 封装 / 箱体:VFQFPN-48 封装:Tray
SI3015-KSR 功能描述:电信线路管理 IC SI2400 Line Side RoHS:否 制造商:STMicroelectronics 产品:PHY 接口类型:UART 电源电压-最大:18 V 电源电压-最小:8 V 电源电流:30 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 安装风格:SMD/SMT 封装 / 箱体:VFQFPN-48 封装:Tray
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*