
TMS470R1VF336A, TMS470R1VF346A
16/32-BIT RISC FLASH MICROCONTROLLERS
SPNS079I – OCTOBER 2002 – REVISED SEPTEMBER 2006
17
POST OFFICE BOX 1443
HOUSTON, TEXAS 77251-1443
MibADC
The multi-buffered analog-to-digital converter (MibADC) accepts an analog signal and converts the signal to a
10-bit digital value.
The VF3x6A MibADC module can function in two modes: compatibility mode, where its programmer’s model
is compatible with the TMS470R1x ADC module and its digital results are stored in digital result registers; or
in buffered mode, where the digital result registers are replaced with three FIFO buffers, one for each conversion
group [event, group1 (G1), and group2 (G2)]. In buffered mode, the MibADC buffers can be serviced by
interrupts.
MibADC event trigger enhancements
The MibADC includes two major enhancements over the event-triggering capability of the TMS470R1x ADC.
Both group1 and the event group can be configured for event-triggered operation, providing up to two event-
triggered groups.
The trigger source and polarity can be selected individually for both group 1 and the event group from the
three options identified in
Table 6.
Table 6. MibADC Event Hookup Configuration
For group 1, these event-triggered selections are configured via the group 1 source select bits (G1SRC[1:0])
in the AD event source register (ADEVTSRC.[5:4]). For the event group, these event-triggered selections are
configured via the event group source select bits (EVSRC[1:0]) in the AD event source register
(ADEVTSRC.[1:0]).
For more detailed functional information on the MibADC, see the TMS470R1x Multi-Buffered Analog-to-Digital
Converter (MibADC) Reference Guide (literature number SPNU206).
EVENT #
SOURCE SELECT BITS FOR G1 OR EVENT
(G1SRC[1:0] or EVSRC[1:0])
SIGNAL PIN NAME
EVENT1
00
ADEVT
EVENT2
01
HET18
EVENT3
10
HET19
EVENT4
11
RESERVED