SWCS046I
– MARCH 2010 – REVISED JULY 2011
Integrated Power Management Unit Top Specification
Check for
1
FEATURES
DESCRIPTION
The purpose of the TPS65910 device is to
provide the following resources:
The TPS65910 is an integrated power-management
IC available in 48-QFN package and dedicated to
Embedded power controller
applications powered by one Li-Ion or Li-Ion polymer
Two efficient step-down dc-dc converters for
battery cell or 3-series Ni-MH cells, or by a 5-V input;
processor cores
it requires multiple power rails. The device provides
One efficient step-down dc-dc converter for I/O
three step-down converters, one step-up converter,
power
and eight LDOs and is designed to support the
One efficient step-up 5-V dc-dc converter
specific
power
requirements
of
OMAP-based
applications.
SmartReflex
compliant dynamic voltage
management for processor cores
Two of the step-down converters provide power for
8 LDO voltage regulators and one RTC LDO
dual processor cores and are controllable by a
(internal purpose)
dedicated class-3 SmartReflex interface for optimum
power savings. The third converter provides power for
One high-speed I2C interface for
the I/Os and memory in the system.
general-purpose control commands (CTL-I2C)
One high-speed I2C interface for SmartReflex
The device includes eight general-purpose LDOs
Class 3 control and command (SR-I2C)
providing a wide range of voltage and current
Two enable signals multiplexed with SR-I2C,
capabilities; they are fully controllable by the I2C
configurable to control any supply state and
interface. The use of the LDOs is flexible; they are
processor cores supply voltage
intended to be used as follows: Two LDOs are
designated to power the PLL and video DAC supply
Thermal shutdown protection and hot-die
rails
on
the
OMAP
based
processors,
four
detection
general-purpose auxiliary LDOs are available to
A real-time clock (RTC) resource with:
provide power to other devices in the system, and
– Oscillator for 32.768-kHz crystal or 32-kHz
two LDOs are provided to power DDR memory
built-in RC oscillator
supplies in applications requiring these memories.
– Date, time and calendar
In addition to the power resources, the device
– Alarm capability
contains an embedded power controller (EPC) to
One configurable GPIO
manage the power sequencing requirements of the
DC-DC switching synchronization through
OMAP systems and an (RTC).
internal or external 3-MHz clock
Figure 1 shows the top-level diagram of the device.
APPLICATIONS
Portable and handheld systems
OMAP3 power management
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright
2010–2011, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.