参数资料
型号: W9412G6IH-5
厂商: Winbond Electronics
文件页数: 10/53页
文件大小: 0K
描述: IC DDR-400 SDRAM 128MB 66TSSOPII
标准包装: 108
格式 - 存储器: RAM
存储器类型: DDR SDRAM
存储容量: 128M(8Mx16)
速度: 250MHz
接口: 并联
电源电压: 2.3 V ~ 2.7 V
工作温度: 0°C ~ 70°C
封装/外壳: 66-TSSOP(0.400",10.16mm 宽)
供应商设备封装: 66-TSOP II
包装: 托盘
W9412G6IH
7.2
7.2.1
Command Function
Bank Activate Command
( RAS = “L”, CAS = “H”, WE = “H”, BA0, BA1 = Bank, A0 to A11 = Row Address)
The Bank Activate command activates the bank designated by the BA (Bank address) signal. Row
addresses are latched on A0 to A11 when this command is issued and the cell data is read out of
the sense amplifiers. The maximum time that each bank can be held in the active state is specified
as t RAS (max) . After this command is issued, Read or Write operation can be executed.
7.2.2
Bank Precharge Command
( RAS = “L”, CAS = “H”, WE = “L”, BA0, BA1 = Bank, A10 = “L”, A0 to A9, A11 = Don’t Care)
The Bank Precharge command percharges the bank designated by BA. The precharged bank is
switched from the active state to the idle state.
7.2.3
Precharge All Command
( RAS = “L”, CAS = “H”, WE = “L”, BA0, BA1 = Don’t Care, A10 = “H”, A0 to A9, A11 = Don’t
Care)
The Precharge All command precharges all banks simultaneously. Then all banks are switched to
the idle state.
7.2.4
Write Command
( RAS = “H”, CAS = “L”, WE = “L”, BA0, BA1 = Bank, A10 = “L”, A0 to A8 = Column Address)
The write command performs a Write operation to the bank designated by BA. The write data are
latched at both edges of DQS. The length of the write data (Burst Length) and column access
sequence (Addressing Mode) must be in the Mode Register at power-up prior to the Write
operation.
7.2.5
Write with Auto-precharge Command
( RAS = “H”, CAS = “L”, WE = “L”, BA0, BA1 = Bank, A10 = “H”, A0 to A8 = Column Address)
The Write with Auto-precharge command performs the Precharge operation automatically after the
Write operation. This command must not be interrupted by any other commands.
7.2.6
Read Command
( RAS = “H”, CAS = “L”, WE = “H”, BA0, BA1 = Bank, A10 = “L”, A0 to A8 = Column Address)
The Read command performs a Read operation to the bank designated by BA. The read data are
synchronized with both edges of DQS. The length of read data (Burst Length), Addressing Mode
and CAS Latency (access time from CAS command in a clock cycle) must be programmed in the
Mode Register at power-up prior to the Read operation.
7.2.7
Read with Auto-precharge Command
( RAS = “H”, CAS = ”L”, WE = ”H”, BA0, BA1 = Bank, A10 = ”H”, A0 to A8 = Column Address)
The Read with Auto-precharge command automatically performs the Precharge operation after the
Read operation.
Publication Release Date: Sep. 16, 2009
- 10 -
Revision A06
相关PDF资料
PDF描述
W9412G6JH-5I IC DDR SDRAM 128MBIT 66TSOPII
W9425G6EH-5 IC DDR-400 SDRAM 256MB 66TSSOPII
W9425G6JH-5I IC DDR SDRAM 256MBIT 66TSOPII
W947D2HBJX5E IC LPDDR SDRAM 128MBIT 90VFBGA
W948D2FBJX5E IC LPDDR SDRAM 256MBIT 90VFBGA
相关代理商/技术参数
参数描述
W9412G6JH 制造商:WINBOND 制造商全称:Winbond 功能描述:2M ? 4 BANKS ? 16 BITS DDR SDRAM
W9412G6JH-4 制造商:Winbond Electronics Corp 功能描述:8*16B DDR1 制造商:Winbond Electronics Corp 功能描述:IC DDR SDRAM 128M 250MHZ 66TSOP
W9412G6JH-5 制造商:Winbond Electronics Corp 功能描述:DRAM Chip DDR SDRAM 128M-Bit 8Mx16 2.5V 66-Pin TSOP 制造商:Winbond Electronics Corp 功能描述:128M BIT DDR1
W9412G6JH-5I 功能描述:IC DDR SDRAM 128MBIT 66TSOPII RoHS:是 类别:集成电路 (IC) >> 存储器 系列:- 标准包装:72 系列:- 格式 - 存储器:RAM 存储器类型:SRAM - 同步 存储容量:4.5M(256K x 18) 速度:133MHz 接口:并联 电源电压:3.135 V ~ 3.465 V 工作温度:0°C ~ 70°C 封装/外壳:100-LQFP 供应商设备封装:100-TQFP(14x20) 包装:托盘
W9412G6JH-5TR 制造商:Winbond Electronics Corp 功能描述:128M DDR SDRAM X16 200MHZ, 65N