收藏本站
参数资料
型号： XRT75L03DIV-F
厂商： Exar Corporation
文件页数： 38/134页
文件大小： 0K
描述： IC LIU E3/DS3/STS-1 3CH 128LQFP
标准包装： 72
类型： 线路接口装置（LIU）
驱动器/接收器数： 3/3
规程： DS3，E3，STS-1
电源电压： 3.135 V ~ 3.465 V
安装类型： 表面贴装
封装/外壳： 128-LQFP 裸露焊盘
供应商设备封装： 128-LQFP（14x20）
包装： 托盘
XRT75L03D
á
REV. 1.0.0
THREE CHANNEL E3/DS3/STS-1 LINE INTERFACE UNIT WITH SONET DESYNCHRONIZER
127
NOTE: The user can only disable the "SONET APS Recovery Time Mode" if the XRT75L03D is operating in the Host Mode.
If the user is operating the XRT75L03D in the Hardware Mode, then the user will have NO ability to disable the
"SONET APS Recovery Time Mode" feature.
9.8.4
How should one configure the XRT75L03D, if one needs to support "Daisy-Chain" Testing at
the end Customer's site?
Daisy-Chain testing is emerging as a new requirements that many of our customers are imposing on our
SONET Mapper and LIU products. Many System Designer/Manufacturers are finding out that whenever their
end-customers that are evaluating and testing out their systems (in order to determine if they wish to move
forward and start purchasing this equipment in volume) are routinely demanding that they be able to test out
these systems with a single piece of test equipment. This means that the end-customer would like to take a
single piece of DS3 or STS-1 test equipment and (with this test equipment) snake the DS3 or STS-1 traffic
(that this test equipment will generate) through many or (preferably all) channels within the system.
For
example, we have had request from our customers that (on a system that supports OC-192) our silicon be able
to support this DS3 or STS-1 traffic snaking through the 192 DS3 or STS-1 ports within this system.
After extensive testing, we have determined that the best approach to complying with test "Daisy-Chain"
Testing requirements, is to configure the Jitter Attenuator blocks (within each of the Channels within the
XRT75L03D) into the "32-Bit" Mode. The user can configure the Jitter Attenuator block (within a given channel
of the XRT75L03D) to operate in this mode by settings in the table below.
REFERENCES
1. TEST REPORT - AUTOMATIC PROTECTION SWITCHING (APS) RECOVERY TIME TESTING WITH THE
XRT94L43 DS3/E3/STS-1 TO STS-12 MAPPER IC - Revision C Silicon
JITTER ATTENUATOR CONTROL REGISTER - CHANNEL 0 ADDRESS LOCATION = 0X07
CHANNEL 1 ADDRESS LOCATION = 0X0F
CHANNEL 2 ADDRESS LOCATION = 0X17
BIT 7BIT 6BIT 5
BIT 4BIT 3BIT 2BIT 1BIT 0
Unused
SONET APS
Recovery
Time Disable
Ch_n
JA RESET
Ch_n
JA1 Ch_n
JA in Tx Path
Ch_n
JA0 Ch_n
R/O
R/WR/W
R/W
00
0
00
011
JITTER ATTENUATOR CONTROL REGISTER - CHANNEL 0 ADDRESS LOCATION = 0X07
CHANNEL 1 ADDRESS LOCATION = 0X0F
CHANNEL 2 ADDRESS LOCATION = 0X17
BIT 7BIT 6BIT 5BIT 4BIT 3
BIT 2BIT 1
BIT 0
Unused
SONET APS
Recovery
Time Disable
Ch_n
JA RESET
Ch_n
JA1 Ch_n
JA in Tx Path
Ch_n
JA0 Ch_n
R/O
R/W
00
000
11
0
相关PDF资料
PDF描述
XRT75L03IV-F IC LIU E3/DS3/STS-1 3CH 128LQFP
XRT75L04DIV-F IC LIU E3/DS3/STS-1 4CH 176TQFP
XRT75L04IV-F IC LIU E3/DS3/STS-1 4CH 176LQFP
XRT75L06DIB-F IC LIU E3/DS3/STS-1 6CH 217BGA
XRT75L06IB-F IC LIU E3/DS3/STS-1 6CH 217BGA
相关代理商/技术参数
参数描述
XRT75L03DIVTR 功能描述:时钟合成器/抖动清除器 3CHNNEL E3/DS3/STS 1 SONET DE-SYNCH RoHS:否 制造商:Skyworks Solutions, Inc. 输出端数量: 输出电平: 最大输出频率: 输入电平: 最大输入频率:6.1 GHz 电源电压-最大:3.3 V 电源电压-最小:2.7 V 封装 / 箱体:TSSOP-28 封装:Reel
XRT75L03DIVTR-F 功能描述:接口 - 专用 RoHS:否 制造商:Texas Instruments 产品类型:1080p60 Image Sensor Receiver 工作电源电压:1.8 V 电源电流:89 mA 最大功率耗散: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:BGA-59
XRT75L03ES 功能描述:时钟合成器/抖动清除器 3 CH T3/E3/STS1 LIU+JA 3.3V RoHS:否 制造商:Skyworks Solutions, Inc. 输出端数量: 输出电平: 最大输出频率: 输入电平: 最大输入频率:6.1 GHz 电源电压-最大:3.3 V 电源电压-最小:2.7 V 封装 / 箱体:TSSOP-28 封装:Reel
XRT75L03IV 功能描述:外围驱动器与原件 - PCI 3CH E3/DS3/STS1 JITTER ATTENUATOR RoHS:否 制造商:PLX Technology 工作电源电压: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:FCBGA-1156 封装:Tray
XRT75L03IV-F 功能描述:外围驱动器与原件 - PCI 3-Ch DS3, E3, STS-1 RoHS:否 制造商:PLX Technology 工作电源电压: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:FCBGA-1156 封装:Tray
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*