参数资料
| 型号： | XRT75R12IB |
| 厂商： | Exar Corporation |
| 文件页数： | 4/90页 |
| 文件大小： | 0K |
| 描述： | IC LIU E3/DS3/STS-1 12CH 420TBGA |
| 标准包装： | 40 |
| 类型： | 线路接口装置（LIU） |
| 驱动器/接收器数： | 12/12 |
| 规程： | DS3，E3，STS-1 |
| 电源电压： | 3.135 V ~ 3.465 V |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 420-LBGA 裸露焊盘 |
| 供应商设备封装： | 420-TBGA（35x35） |
| 包装： | 托盘 |
第1页第2页第3页当前第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页第69页第70页第71页第72页第73页第74页第75页第76页第77页第78页第79页第80页第81页第82页第83页第84页第85页第86页第87页第88页第89页第90页
XRT75R12
9
TWELVE CHANNEL E3/DS3/STS-1 LINE INTERFACE UNIT WITH JITTER ATTENUATOR
REV. 1.0.4
CLOCK INTERFACE
PIN #
SIGNAL NAME
TYPE
DESCRIPTION
R5
SFM_EN
I
Single Frequency Mode Enable
This input pin is used to configure the XRT75R12 to operate in the SFM (Single
Frequency Mode).
When this feature is invoked, the SFM Synthesizer will become active. By
applying a 12.288MHz clock signal to the STS-1Clk/12M pin, the XRT75R12 will
generate all of the appropriate clock signals (e.g., 34.368MHz, 44.736MHz or
51.84). The XRT75R12 internal circuitry will route each of these synthesized
clock signals to the appropriate nodes of the corresponding channels in the
XRT75R12.
"Low" - Disables the Single Frequency Mode. In this setting, the user is
required to supply to the E3CLK, DS3CLK or STS-1CLK input pins all of the rel-
evant clock signals that are to be used within the chip.
"High" - Enables the Single-Frequency Mode.
NOTE: This input pin is internally pulled low.
R1
E3Clk
I
E3 Clock Input (34.368 MHz ± 20 ppm)
If any one of the channels is configured in E3 mode, a reference clock of 34.368
MHz ± 20 ppm is applied to this input pin. If the LIU is used in E3 mode only,
this pin must be connected to the DS3Clk input pin to have access to the inter-
nal microprocessor.
NOTE: SFM mode negates the need for this clock
T1
DS3Clk
I
DS3 Clock Input (44.736 MHz ± 20 ppm)
If any one of the channels is configured in DS3 mode, a reference clock of
44.736 MHz ± 20 ppm is applied to this input pin.
NOTE: SFM mode negates the need for this clock
U1
STS-1Clk/12M
I
STS-1 Clock Input (51.84 MHz ± 20 ppm)
If any one of the channels is configured in STS-1 mode, a reference clock of
51.84MHz ± 20 ppm is applied to this input pin. If the LIU is used in STS-1
mode only, this pin must be connected to the DS3Clk input pin to have access
to the internal microprocessor.
Single Frequency Mode Clock Input (12.288MHz ± 20 ppm)
In Single Frequency Mode, a reference clock of 12.288 MHz ± 20 ppm is con-
nected to this pin and the internal clock synthesizer generates the appropriate
clock frequencies based on the configuration of the rates (E3, DS3 or STS-1).
C26
W22
K23
W24
J25
V25
J2
V2
K4
W3
C1
W5
CLKOUT0
CLKOUT1
CLKOUT2
CLKOUT3
CLKOUT4
CLKOUT5
CLKOUT6
CLKOUT7
CLKOUT8
CLKOUT9
CLKOUT10
CLKOUT11
O
Reference Clock Out
A reference clock pin is provided for each channel that will supply a precise data
rate frequency derived from either the Clock input pin (E3Clk, DS3Clk, or STS-
1Clk) or the 12.288MHz input in SFM mode. This frequency will be as stable as
the original source. It is designed to provide the attached framer with its appro-
priate reference clock.
相关PDF资料 |
PDF描述 |
|---|---|
| ISL267450AIUZ-T | IC INTERFACE |
| MS3116P16-8P | CONN PLUG 8POS STRAIGHT W/PINS |
| IDT72V815L15PFI | IC FIFO SYNC 512X18 15NS 128QFP |
| MS27513E8F35SD | CONN RCPT 6POS BOX MNT W/SCKT |
| MS3101E16-12S | CONN RCPT 1POS FREE HNG W/SCKT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| XRT75R12IB-F | 功能描述:外围驱动器与原件 - PCI 12 Channel 3.3V-5V temp -45 to 85C RoHS:否 制造商:PLX Technology 工作电源电压: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:FCBGA-1156 封装:Tray |
| XRT75R12IB-L | 功能描述:LIN 收发器 Attenuator RoHS:否 制造商:NXP Semiconductors 工作电源电压: 电源电流: 最大工作温度: 封装 / 箱体:SO-8 |
| XRT75VL00 | 制造商:EXAR 制造商全称:EXAR 功能描述:E3/DS3/STS-1 LINE INTERFACE UNIT WITH JITTER ATTENUATOR |
| XRT75VL00_08 | 制造商:EXAR 制造商全称:EXAR 功能描述:E3/DS3/STS-1 LINE INTERFACE UNIT WITH JITTER ATTENUATOR |
| XRT75VL00D | 制造商:EXAR 制造商全称:EXAR 功能描述:E3/DS3/STS-1 LINE INTERFACE UNIT WITH SONET DESYNCHRONIZER |
发布紧急采购，3分钟左右您将得到回复。