参数资料
型号: 71M6511-IGTR/F
厂商: MAXIM INTEGRATED PRODUCTS INC
元件分类: 电源管理
英文描述: 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PQFP64
封装: LEAD FREE, LQFP-64
文件页数: 40/98页
文件大小: 1278K
代理商: 71M6511-IGTR/F
71M6511/71M6511H
Single-Phase Energy Meter IC
DATA SHEET
NOVEMBER 2010
Page: 45 of 98
2005–2010 Teridian Semiconductor Corporation
V2.7
A Maxim Integrated Products Brand
TMUXOUT Pin: One out of 16 digital or 4 analog signals can be selected to be output on the TMUXOUT pin. The function of
the multiplexer is controlled with the I/O RAM register TMUX (0x2000[3:0]), as shown in Table 58.
TMUX[3:0]
Mode
Function
0
analog
DGND
1
analog
IBIAS
2
analog
PLL_2.5V
3
analog
VBIAS
4
digital
RTM (Real time output from CE)
5
digital
WDTR_EN (Comparator 1 Output AND V1LT3)
6
digital
reserved
7
digital
reserved
8
digital
RXD (from Optical interface)
9
digital
MUX_SYNC
A
digital
CK_10M
B
digital
CK_MPU
C
--
reserved for production test
D
digital
RTCLK
E
digital
CE_BUSY
F
digital
XFER_BUSY
Table 58: TMUX[3:0] Selections
Emulator Port: The emulator port, consisting of the pins E_RST, E_TCLK and E_RXTX provides control of the MPU through
an external in-circuit emulator. The emulator port is compatible with the ADM51 emulators manufactured by Signum Systems.
The signals of the emulator port have weak pull-ups. Adding 1k
pull-up resistors on the PCB is recommended.
Real-Time Monitor: The RTM output of the CE is available as one of the digital multiplexer options. RTM data is read from the
CE DRAM locations specified by I/O RAM registers RTM0, RTM1, RTM2, and RTM3 after the rise of MUX_SYNC. The RTM can
be enabled and disabled with I/O RAM register RTM_EN. The RTM output is clocked by CKTEST. Each RTM word is clocked
out in 35 cycles and contains a leading flag bit. Figure 13 in the System Timing Section illustrates the RTM output format. RTM
is low when not in use.
SSI Interface: A high-speed serial interface with handshake capability is available to send a contiguous block of CE data to an
external data logger or DSP. The block of data, configurable as to location and size, is sent starting 1 cycle of 32kHz before
each CE code pass begins. If the block of data is big enough that transmission has not completed when the code pass begins,
it will complete during the CE code pass with no timing impact to the CE or the serial data. In this case, care must be taken
that the transmitted data is not modified unexpectedly by the CE. The SSI interface is enabled by the SSI_EN bit and consists
of SCLK, SSDATA, and SFR as outputs and, optionally, SRDY as input. The interface is compatible with 16bit and 32bit
processors. The operation of each pin is as follows:
SCLK is the serial clock. The clock can be 5MHz or 10MHz, as specified by the SSI_10M bit. The SSI_CKGATE bit controls
whether SCLK runs continuously or is gated off when no SSI activity is occurring. If SCLK is gated, it will begin 3 cycles before
SFR rises and will persist 3 cycles after the last data bit is output.
The pins used for the SSI are multiplexed with the LCD segment outputs, as shown in Table 59. Thus, the LCD should be
disabled when the SSI is in use.
相关PDF资料
PDF描述
71M6511-IGT/F 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PQFP64
71M6511-IGT 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PQFP64
71M6511-IGTR 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PQFP64
71M6511H-IGTR/F 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PQFP64
71M6511H-IGT/F 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PQFP64
相关代理商/技术参数
参数描述
71M6512-DB 制造商:Maxim Integrated Products 功能描述:Development Boards & Kits - 8051 71M6512 Demo Brd
71M6512-IM/F 制造商:Maxim Integrated Products 功能描述:Metering Systems on a Chip - SoC Residential Meter Extended Io
71M6512-IMR/F 制造商:Maxim Integrated Products 功能描述:Metering Systems on a Chip - SoC Residential Meter Extended Io
71M6512-TGQ1-68M 功能描述:程序设计器配件 Gang Programmer Base Unit+6512 Socket Brd RoHS:否 制造商:Lattice 产品:ispDOWNLOAD Cables 用于:In-system Programming
71M6513 制造商:未知厂家 制造商全称:未知厂家 功能描述:71M6513