参数资料
| 型号： | AD73322LYRZ |
| 厂商： | Analog Devices Inc |
| 文件页数： | 33/48页 |
| 文件大小： | 0K |
| 描述： | IC ANALOG FRONT END DUAL 28-SOIC |
| 标准包装： | 27 |
| 位数： | 16 |
| 通道数： | 4 |
| 功率（瓦特）： | 73mW |
| 电压 - 电源，模拟： | 2.7 V ~ 5.5 V |
| 电压 - 电源，数字： | 2.7 V ~ 5.5 V |
| 封装/外壳： | 28-SOIC（0.295"，7.50mm 宽） |
| 供应商设备封装： | 28-SOIC W |
| 包装： | 管件 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页当前第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页
AD73322L
Rev. A | Page 39 of 48
At each occurrence of an SDOFS pulse, the DSP’s transmit
buffer contents are sent to the SDI pin of the AD73322L. This
also causes a subsequent DSP Tx interrupt which transfers the
initialization word, pointed to by the circular buffer pointer, to
the Tx buffer. The buffer pointer is updated to point to the next
unsent initialization word. When the circular buffer pointer
wraps around, which happens after the last word has been
accessed, it indicates that the initialization phase is complete.
This can be done manually in the DSP using a simple address
check, or autobuffered mode can be used to complete the
transfer automatically.
txcdat: ar = dm(stat_flag);
ar = pass ar;
if eq rti;
ena sec_reg;
ax0 = dm (i3, m1);
tx0 = ax0;
ax0 = i3;
ay0 = ^init_cmds;
ar = ax0 - ay0;
if gt rti;
ax0 = 0x00;
dm (stat_flag) = ax0;
rti;
In the main body of the program the code loops, waiting for the
initialization sequence to be completed.
check_init:
ax0 = dm (stat_flag);
af = pass ax0;
if ne jump check_init;
Because the AD73322L is effectively a cascade of two codec
units, it is important to observe the following restrictions in the
sequence of sending initialization words to the two codecs. It is
preferable to send pairs of control words for the corresponding
control registers in each codec, and it is essential to send the
control word for codec 2 before that for codec 1. Control
Registers A and B contain settings, such as sampling rate, serial
clock rate, etc., which critically require synchronous update in
both codecs.
Once the device has been initialized, Control Register A on
both codecs is written with a control word which changes the
operating mode from program mode to either data mode or
mixed control data mode. The device count field, which
defaults to 000b, must be programmed to 001b for a single
AD73322L device. In data mode or mixed mode, the main
function of the device is to return ADC samples from both
codecs and to accept DAC words for both codecs. During each
sample interval, two ADC samples are returned from the
device, while in the same interval two DAC update samples are
sent to the device. To reduce the number of interrupts and to
reduce complexity, autobuffering can be used to ensure that
only one interrupt is generated during each sampling interval.
相关PDF资料 |
PDF描述 |
|---|---|
| AD73360ARZ | IC PROCESSOR FRONTEND 6CH 28SOIC |
| AD7352YRUZ-500RL7 | IC ADC DUAL 12BIT 3MSPS 16TSSOP |
| AD7356YRUZ-500RL7 | IC ADC DUAL 12BIT 5MSPS 16TSSOP |
| AD7357YRUZ | IC ADC DUAL14BIT 4.2MSPS 16TSSOP |
| AD7367BRUZ-500RL7 | IC ADC 14BIT SAR 1MSPS 24TSSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD73322LYST | 制造商:Analog Devices 功能描述: |
| AD73322LYSTZ | 制造商:Rochester Electronics LLC 功能描述: 制造商:Analog Devices 功能描述: |
| AD73360 | 制造商:AD 制造商全称:Analog Devices 功能描述:Six-Input Channel Analog Front End |
| AD73360AR | 制造商:Analog Devices 功能描述:AFE General Purpose 6ADC 16-Bit 5V 28-Pin SOIC W 制造商:Analog Devices 功能描述:IC 16-BIT ADC |
| AD73360AR-REEL | 制造商:Analog Devices 功能描述:AFE General Purpose 6ADC 16-Bit 5V 28-Pin SOIC W T/R 制造商:Analog Devices 功能描述:AFE GEN PURPOSE 6ADC 16BIT 5V/5V/5V 28SOIC W - Tape and Reel |
发布紧急采购，3分钟左右您将得到回复。