- 您现在的位置：买卖IC网 > PDF目录10149 > AD7712ARZ-REEL (Analog Devices Inc)IC ADC 24BIT SGNL CONDTNR 24SOIC PDF资料下载
参数资料
| 型号： | AD7712ARZ-REEL |
| 厂商： | Analog Devices Inc |
| 文件页数： | 17/28页 |
| 文件大小： | 0K |
| 描述： | IC ADC 24BIT SGNL CONDTNR 24SOIC |
| 标准包装： | 1,000 |
| 位数： | 24 |
| 采样率（每秒）： | 1.03k |
| 数据接口： | 串行 |
| 转换器数目： | 1 |
| 功率耗散（最大）： | 45mW |
| 电压电源： | 模拟和数字，双 ± |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 24-SOIC（0.295"，7.50mm 宽） |
| 供应商设备封装： | 24-SOIC W |
| 包装： | 带卷 (TR) |
| 输入数目和类型： | 1 个单端，单极；1 个差分，单极；1 个差分，双极 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页当前第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页
REV. F
–24–
AD7712
SIMPLIFYING THE EXTERNAL CLOCKING MODE
INTERFACE
In many applications, the user may not require the facility of
writing to the on-chip calibration registers. In this case, the
serial interface to the AD7712 in external clocking mode can be
simplified by connecting the
TFS line to the A0 input of the
AD7712 (see Figure 15). This means that any write to the device
will load data to the control register (since A0 is low while
TFS
is low), and any read to the device will access data from the out-
put data register or from the calibration registers (since A0 is
high while
RFS is low). It should be noted that in this arrange-
ment the user does not have the capability of reading from the
control register.
AD7712
SDATA
SCLK
TFS
A0
FOUR INTER-
FACE LINES
RFS
Figure 15. Simplified Interface with
TFS Connected to A0
Another method of simplifying the interface is to generate the
TFS signal from an inverted RFS signal. However, generating
the signals the opposite way around (
RFS from an inverted
TFS) will cause writing errors.
MICROCOMPUTER/MICROPROCESSOR INTERFACING
The AD7712’s flexible serial interface allows easy interface to
most microcomputers and microprocessors. Figure 16 shows a
flowchart diagram for a typical programming sequence for read-
ing data from the AD7712 to a microcomputer while Figure 17
shows a flowchart diagram for writing data to the AD7712.
Figures 18, 19, and 20 show some typical interface circuits.
The flowchart of Figure 16 is for continuous read operations
from the AD7712 output register. In the example shown, the
DRDY line is continuously polled. Depending on the micro-
processor configuration, the
DRDY line may come to an
interrupt input, in which case the
DRDY will automatically
generate an interrupt without being polled. Reading the serial
buffer could be anything from one read operation up to three
read operations (where 24 bits of data are read into an 8-bit
serial register). A read operation to the control/calibration
registers is similar, but, in this case, the status of
DRDY can
be ignored. The A0 line is brought low when the
RFS line is
brought low when reading from the control register.
The flowchart also shows the bits being reversed after they have
been read in from the serial port. This depends on whether the
microprocessor expects the MSB of the word first or the LSB of
the word first. The AD7712 outputs the MSB first.
NO
YES
BRING
RFS LOW
3
REVERSE
ORDER OF BITS
BRING
RFS HIGH
POLL
DRDY
CONFIGURE AND
INITIALIZE
C/ P
SERIAL PORT
DRDY
LOW?
BRING
RFS, TFS HIGH
READ
SERIAL BUFFER
START
Figure 16. Flowchart for Continuous Read
Operations to the AD7712
The flowchart in Figure 17 is for a single 24-bit write operation
to the AD7712 control or calibration registers. This shows data
being transferred from data memory to the accumulator before
being written to the serial buffer. Some microprocessor systems
will allow data to be written directly to the serial buffer from data
memory. Writing data to the serial buffer from the accumulator
will generally consist of either two or three write operations,
depending on the size of the serial buffer.
The flowchart also shows the option of the bits being reversed
before being written to the serial buffer. This depends on
whether the first bit transmitted by the microprocessor is the
MSB or the LSB. The AD7712 expects the MSB as the first bit
in the data stream. In cases where the data is being read or
being written in bytes and the data has to be reversed, the bits
will have to be reversed for every byte.
相关PDF资料 |
PDF描述 |
|---|---|
| VE-2NN-MX-F4 | CONVERTER MOD DC/DC 18.5V 75W |
| D38999/20WB98SA | CONN RCPT 6POS WALL MNT W/SCKT |
| PXA911/04/P | CONN PLUG 4POS W/PINS LG CABLE |
| VE-2NN-MX-F3 | CONVERTER MOD DC/DC 18.5V 75W |
| VE-B30-IV-F2 | CONVERTER MOD DC/DC 5V 150W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD7712ARZ-REEL7 | 功能描述:IC ADC 24BIT SGNL CONDTNR 24SOIC RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1 系列:- 位数:14 采样率（每秒）:83k 数据接口:串行，并联 转换器数目:1 功率耗散（最大）:95mW 电压电源:双 ± 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:28-DIP（0.600"，15.24mm） 供应商设备封装:28-PDIP 包装:管件 输入数目和类型:1 个单端，双极 |
| AD7712EB | 制造商:AD 制造商全称:Analog Devices 功能描述:LC 2 MOS Signal Conditioning ADC(229.08 k) |
| AD7712SQ | 制造商:Analog Devices 功能描述: 制造商:Rochester Electronics LLC 功能描述:24 BIT SIGMA DELTA ADC IC - Bulk |
| AD7713 | 制造商:AD 制造商全称:Analog Devices 功能描述:LC2MOS Loop-Powered Signal Conditioning ADC |
发布紧急采购，3分钟左右您将得到回复。