参数资料
型号: AD9995KCPZ
厂商: Analog Devices Inc
文件页数: 22/60页
文件大小: 0K
描述: IC CCD SIGNAL PROCESSOR 56-LFCSP
标准包装: 1
类型: CCD 信号处理器,12 位
输入类型: 逻辑
输出类型: 逻辑
接口: 3 线串口
电流 - 电源: 30mA
安装类型: 表面贴装
封装/外壳: 56-VFQFN 裸露焊盘,CSP
供应商设备封装: 56-LFCSP-VQ(8x8)
包装: 托盘
AD9995
–29–
off positions. STROBON_FD is the field in which the STROBE
is turned on, measured from the field containing the last SUBCK
before exposure begins.The STROBON_ LN PX register gives
the line and pixel positions with respect to STROBON_FD.The
STROBE off position is programmable to any field, line, and
pixel location with respect to the field of the last SUBCK.
TRIGGER Register Limitations
While the TRIGGER register can be used to perform a complete
exposure and readout operation, there are limitations on its use.
Once an exposure-plus-readout operation has been triggered,
another exposure/readout operation cannot be triggered right
away.There must be at least one idle field (VD intervals) before
the next exposure/readout can be triggered.
The same limitation applies to the triggering of the MSHUT
signal.There must be at least one idle field after the completion
of the MSHUT OFF operation before another MSHUT OFF
operation may be programmed.
The VSUB trigger requires two idle fields between exposure/
readout operations in order to ensure proper VSUB on/off trig-
gering. If the VSUB signal is not required to be turned on and
off in between each successive exposure/readout operation, this
limitation can be ignored.The VSUB Keep-On mode is useful
when successive exposure/readout operations are required.
VD
SUBCK
STROBE PROGRAMMABLE SETTINGS:
1. ACTIVE POLARITY.
2. ON POSITION IS PROGRAMMABLE IN ANY FIELD DURING THE EXPOSURE TIME (WITH RESPECT TO THE FIELD CONTAINING THE LAST SUBCK).
3. OFF POSITION IS PROGRAMMABLE IN ANY FIELD DURING THE EXPOSURE TIME.
t
EXP
VSG
STROBE 1
2
3
TRIGGER
EXPOSURE
AND STROBE
Figure 31. STROBE Output Programmability
Table XII.VSUB, MSHUT, and STROBE Register Parameters
Register
Length
Range
Description
VSUBMODE[0]
1b
High/Low
VSUB Mode (0 = Mode 0, 1 = Mode 1) (See Figure 29).
VSUBMODE[1]
1b
High/Low
VSUB Keep-On Mode.VSUB will stay active after readout
when set high.
VSUBON[11:0]
12b
0–4095 Line Location
VSUB On Position. Active starting in any line of field.
VSUBON[12]
1b
High/Low
VSUB Active Polarity.
MSHUTPOL[0]
1b
High/Low
MSHUT Active Polarity.
MSHUTPOL[1]
1b
On/Off
MSHUT Manual Enable (1 = Active or Open).
MSHUTON
24b
0–4095 Line/Pix Location
MSHUT On Position Line [11:0] and Pixel [23:12] Location.
MSHUTOFF_FD
12b
0–4095 Field Location
Field Location to Switch Off MSHUT (Inactive or Closed).
MSHUTOFF_LNPX
24b
0–4095 Line/Pix Location
Line/Pixel Position to Switch Off MSHUT (Inactive or Closed).
STROBPOL
1b
High/Low
STROBE Active Polarity.
STROBON_FD
12b
0–4095 Field Location
STROBE ON Field Location, with Respect to Last SUBCK Field.
STROBON_LNPX
24b
0–4095 Line/Pix Location
STROBE ON Line/Pixel Position.
STROBOFF_FD
12b
0–4095 Field Location
STROBE OFF Field Location, with Respect to Last SUBCK Field.
STROBOFF_LNPX
24b
0–4095 Line/Pix Location
STROBE OFF Line/Pixel Position.
REV. 0
OBSOLETE
相关PDF资料
PDF描述
ADA4424-6ARUZ IC FILTR VID6CH SD/ED/HD 38TSSOP
ADATE302-02BBCZ IC DCL ATE 500MHZ DUAL 84CSPBGA
ADATE304BBCZ IC DCL ATE 200MHZ DUAL 84CSPBGA
ADATE305BSVZ IC DCL ATE 250MHZ DUAL 100TQFP
ADAU1328BSTZ IC CODEC 24BIT 2ADC/8DAC 48LQFP
相关代理商/技术参数
参数描述
AD9995KCPZRL 功能描述:IC CCD SIGNAL PROCESSOR 56-LFCSP RoHS:是 类别:集成电路 (IC) >> 接口 - 传感器和探测器接口 系列:- 其它有关文件:Automotive Product Guide 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:74 系列:- 类型:触控式传感器 输入类型:数字 输出类型:数字 接口:JTAG,串行 电流 - 电源:100µA 安装类型:表面贴装 封装/外壳:20-TSSOP(0.173",4.40mm 宽) 供应商设备封装:20-TSSOP 包装:管件
AD9995KCPZRL7 制造商:Rochester Electronics LLC 功能描述: 制造商:Analog Devices 功能描述:
AD9996BBCZ 制造商:Rochester Electronics LLC 功能描述:14B 40 MSPS AFETG CONVERTER - Bulk
AD9996BBCZRL 制造商:Rochester Electronics LLC 功能描述:- Bulk
AD-9FT4-B2 制造商:Pan Pacific 功能描述: