- 您现在的位置：买卖IC网 > PDF目录19395 > ADSP-21478KBCZ-3A (Analog Devices Inc)IC DSP SHARK 300MHZ 196CSPBGA PDF资料下载
参数资料
| 型号： | ADSP-21478KBCZ-3A |
| 厂商： | Analog Devices Inc |
| 文件页数： | 34/76页 |
| 文件大小： | 0K |
| 描述： | IC DSP SHARK 300MHZ 196CSPBGA |
| 标准包装： | 1 |
| 系列： | SHARC® |
| 类型： | 浮点 |
| 接口： | DAI，DPI，EBI/EMI，I²C，SPI，SPORT，UART/USART |
| 时钟速率： | 300MHz |
| 非易失内存： | ROM（4Mb） |
| 芯片上RAM： | 3Mb |
| 电压 - 输入/输出： | 3.30V |
| 电压 - 核心： | 1.30V |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 196-LFBGA，CSPBGA |
| 供应商设备封装： | 196-CSPBGA（12x12） |
| 包装： | 托盘 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页当前第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页第69页第70页第71页第72页第73页第74页第75页第76页
Rev. C
|
Page 4 of 76
|
July 2013
The block diagram of the ADSP-2147x on Page 1 also shows the
peripheral clock domain (also known as the I/O processor),
which contains the following features:
IOD0 (peripheral DMA) and IOD1 (external port DMA)
buses for 32-bit data transfers
Peripheral and external port buses for core connection
External port with an asynchronous memory interface
(AMI) and SDRAM controller
4 units for pulse width modulation (PWM) control
1 memory-to-memory (MTM) unit for internal-to-internal
memory transfers
Digital applications interface that includes four precision
clock generators (PCG), an input data port (IDP/PDAP)
for serial and parallel interconnect, an S/PDIF
receiver/transmitter, four asynchronous sample rate con-
verters, eight serial ports, a shift register, and a flexible
signal routing unit (DAI SRU).
Digital peripheral interface that includes two timers, a 2-
wire interface, one UART, two serial peripheral interfaces
(SPI), two precision clock generators (PCG), three pulse
width modulation (PWM) units, and a flexible signal rout-
ing unit (DPI SRU).
As shown in the SHARC core block diagram on Page 5, the pro-
cessors use two computational units to deliver a significant
performance increase over the previous SHARC processors on a
range of DSP algorithms. With its SIMD computational hard-
ware, the processors can perform 1.8 GFLOPS running at
300 MHz.
FAMILY CORE ARCHITECTURE
The processors are code compatible at the assembly level with
the ADSP-2146x, ADSP-2137x, ADSP-2136x, ADSP-2126x,
ADSP-21160, and ADSP-21161, and with the first generation
ADSP-2106x SHARC processors. The ADSP-2147x share archi-
tectural features with the ADSP-2126x, ADSP-2136x, ADSP-
2137x, ADSP-2146x, and ADSP-2116x SIMD SHARC proces-
sors, as shown in Figure 2 and detailed in the following sections.
SIMD Computational Engine
The processors contain two computational processing elements
that operate as a single-instruction, multiple-data (SIMD)
engine. The processing elements are referred to as PEX and PEY
and each contains an ALU, multiplier, shifter, and register file.
PEX is always active, and PEY may be enabled by setting the
PEYEN mode bit in the MODE1 register. SIMD mode allows
the processor to execute the same instruction in both processing
elements, but each processing element operates on different
data. This architecture is efficient at executing math intensive
DSP algorithms.
SIMD mode also affects the way data is transferred between
memory and the processing elements because twice the data
bandwidth is required to sustain computational operation in the
processing elements. Therefore, entering SIMD mode also dou-
bles the bandwidth between memory and the processing
elements. When using the DAGs to transfer data in SIMD
mode, two data values are transferred with each memory or reg-
ister file access.
SIMD mode is supported from external SDRAM but is not sup-
ported in the AMI.
Independent, Parallel Computation Units
Within each processing element is a set of computational units.
The computational units consist of an arithmetic/logic unit
(ALU), multiplier, and shifter. These units perform all opera-
tions in a single cycle. The three units within each processing
element are arranged in parallel, maximizing computational
throughput. Single multifunction instructions execute parallel
ALU and multiplier operations. In SIMD mode, the parallel
ALU and multiplier operations occur in both processing ele-
ments. These computation units support IEEE 32-bit single-
precision floating-point, 40-bit extended precision floating-
point, and 32-bit fixed-point data formats.
Timer
The processor contains a core timer that can generate periodic
software interrupts. The core timer can be configured to use
FLAG3 as a timer expired signal.
Data Register File
Each processing element contains a general-purpose data regis-
ter file. The register files transfer data between the computation
units and the data buses, and store intermediate results. These
10-port, 32-register (16 primary, 16 secondary) register files,
combined with the processor’s enhanced Harvard architecture,
allow unconstrained data flow between computation units and
internal memory. The registers in PEX are referred to as
R0–R15 and in PEY as S0–S15.
Context Switch
Many of the processor’s registers have secondary registers that
can be activated during interrupt servicing for a fast context
switch. The data registers in the register file, the DAG registers,
and the multiplier result registers all have secondary registers.
The primary registers are active at reset, while the secondary
registers are activated by control bits in a mode control register.
Universal Registers
Universal registers can be used for general-purpose tasks. The
USTAT (4) registers allow easy bit manipulations (Set, Clear,
Toggle, Test, XOR) for all peripheral control and status
registers.
The data bus exchange register (PX) permits data to be passed
between the 64-bit PM data bus and the 64-bit DM data bus, or
between the 40-bit register file and the PM/DM data bus. These
registers contain hardware to handle the data width difference.
Single-Cycle Fetch of Instruction and Four Operands
The processors feature an enhanced Harvard architecture in
which the data memory (DM) bus transfers data and the pro-
gram memory (PM) bus transfers both instructions and data
(see Figure 2). With its separate program and data memory
相关PDF资料 |
PDF描述 |
|---|---|
| VI-24W-CY-F4 | CONVERTER MOD DC/DC 5.5V 50W |
| REC3-2412DR/H1M/SMD | CONV DC/DC 3W 24VIN +/-12VOUT |
| VE-J5F-IZ | CONVERTER MOD DC/DC 72V 25W |
| VI-24V-CY-F3 | CONVERTER MOD DC/DC 5.8V 50W |
| MAX6518UKP095+T | IC TEMP SENSOR SW SOT23-5 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADSP-21478KCPZ-1A | 功能描述:IC DSP SHARK 200MHZ 88LFCSP RoHS:是 类别:集成电路 (IC) >> 嵌入式 - DSP（数字式信号处理器） 系列:SHARC® 标准包装:2 系列:StarCore 类型:SC140 内核 接口:DSI，以太网，RS-232 时钟速率:400MHz 非易失内存:外部 芯片上RAM:1.436MB 电压 - 输入/输出:3.30V 电压 - 核心:1.20V 工作温度:-40°C ~ 105°C 安装类型:表面贴装 封装/外壳:431-BFBGA，FCBGA 供应商设备封装:431-FCPBGA（20x20） 包装:托盘 |
| ADSP-21478KSWZ-1A | 功能描述:IC DSP SHARC 200MHZ LP 100LQFP RoHS:是 类别:集成电路 (IC) >> 嵌入式 - DSP（数字式信号处理器） 系列:SHARC® 标准包装:2 系列:StarCore 类型:SC140 内核 接口:DSI，以太网，RS-232 时钟速率:400MHz 非易失内存:外部 芯片上RAM:1.436MB 电压 - 输入/输出:3.30V 电压 - 核心:1.20V 工作温度:-40°C ~ 105°C 安装类型:表面贴装 封装/外壳:431-BFBGA，FCBGA 供应商设备封装:431-FCPBGA（20x20） 包装:托盘 |
| ADSP-21478KSWZ-2A | 功能描述:IC DSP SHARC 266MHZ LP 100LQFP RoHS:是 类别:集成电路 (IC) >> 嵌入式 - DSP（数字式信号处理器） 系列:SHARC® 标准包装:2 系列:StarCore 类型:SC140 内核 接口:DSI，以太网，RS-232 时钟速率:400MHz 非易失内存:外部 芯片上RAM:1.436MB 电压 - 输入/输出:3.30V 电压 - 核心:1.20V 工作温度:-40°C ~ 105°C 安装类型:表面贴装 封装/外壳:431-BFBGA，FCBGA 供应商设备封装:431-FCPBGA（20x20） 包装:托盘 |
| ADSP-21478KSWZ-ENG | 制造商:Analog Devices 功能描述:SHARC PROCESSOR - Trays |
| ADSP-21479 | 制造商:AD 制造商全称:Analog Devices 功能描述:SHARC Processor |
发布紧急采购，3分钟左右您将得到回复。