参数资料
型号: ADV7180WBCPZ
厂商: Analog Devices Inc
文件页数: 27/116页
文件大小: 0K
描述: IC VIDEO DECODER SDTV 40LFCSP
标准包装: 1
类型: 视频解码器
应用: 数码相机,手机,便携式视频
安装类型: 表面贴装
封装/外壳: 40-VFQFN 裸露焊盘,CSP
供应商设备封装: 40-LFCSP-VQ(6x6)
包装: 托盘
ADV7180
Data Sheet
Rev. I | Page 18 of 116
POWER SUPPLY SEQUENCING
POWER-UP SEQUENCE
The power-up sequence for the ADV7180 is to power up all power
supplies simultaneously. If this is not possible, the 3.3 V supply
(DVDDIO) must be established first. When the 3.3 V supply is stable,
power up the 1.8 V supplies (DVDD, PVDD, and AVDD) as quickly as
possible. Until the 1.8 V supplies are fully established, all digital
pins are in an undefined state.
During power-up, all supplies must adhere to the specifications
Take care to ensure that a lower rated supply does not go above
a higher rated supply. For example, the 3.3 V DVDDIO supply must
never drop below a 1.8 V supply such as the DVDD, PVDD, or AVDD.
To power up the ADV7180, follow these steps.
1. Assert the PWRDWN pin and the RESET pin (that is, pull
the pins low.)
2. Power up the 3.3 V supply (DVDDIO) and 1.8 V supplies
(DVDD, PVDD, and AVDD) simultaneously.1, 2
3. When all supplies are fully asserted, pull the PWRDWN
pin high. Note that this step can be ignored on the 32-lead
LFCSP, as the PWRDWN pin is not available.
4. Wait 5 ms, then pull the RESET pin high.
5. When all power supplies, the PWRDWN pin, and the RESET
pin are powered up and stable, wait an additional 5 ms
before initiating I2C communication with the ADV7180.
POWER-DOWN SEQUENCE
The ADV7180 supplies can be deasserted simultaneously as
long as DVDDIO does not go below a lower rated supply.
UNIVERSAL POWER SUPPLY
The ADV7180 can operate with a DVDDIO supply at a nominal
value of 1.8 V. Therefore, it is possible to power up all the supplies
for the ADV7180 (DVDD, AVDD, PVDD, and DVDDIO) to 1.8 V.
When DVDDIO is at a nominal value of 1.8 V, power up the
ADV7180 in the following manner:
1. Follow the power-up sequence described in the Power-Up
Sequence section, but power up the DVDDIO supply to 1.8 V
instead of 3.3 V. In addition, power up the PWRDWN pin
and the RESET pin to 1.8 V instead of 3.3 V.
2. Set the drive strengths of the digital outputs of the ADV7180
to their maximum setting. See the Global Pin Control section.
3. Connect any pull-up resistors connected to pins on the
ADV7180, such as the SCLK pin and the SDATA pin, to
1.8 V, rather than 3.3 V.
1
If it is not possible to power up the DVDDIO and 1.8 V supplies simultaneously,
the DVDDIO supply must be powered up first. When the DVDDIO is stable, power
up the 1.8 V supplies as quickly as possible.
2
During power-up, take care to ensure that the DVDDIO supply never drops
below any of the 1.8 V supplies.
05700-
100
3.3V
1.8V
V
OLTA
GE
TIME
SUPPLIES
POWER-UP
3.3V SUPPLIES
PWRDWN PIN
POWER-UP
RESET PIN
POWER-UP
5ms
RESET
OPERATION
RESET PIN
1.8V
SUPPLIES
5ms
WAIT
Figure 12. Power-Up Sequence of the 40-Lead LFCSP, 48-Lead LQFP, and 64-Lead LQFP
05700-
101
3.3V
1.8V
V
OLTA
GE
TIME
SUPPLIES
POWER-UP
3.3V SUPPLIES
RESET PIN
POWER-UP
5ms
RESET
OPERATION
RESET PIN
1.8V
SUPPLIES
5ms
WAIT
Figure 13. Power-Up Sequence of the 32-Lead LFCSP
相关PDF资料
PDF描述
ADV7186BBCZ IC VIDEO DECODER 196CSPBGA
ADV7441ABSTZ-5P IC DECODER DIGITIZER 144LQFP
ADV7513BSWZ IC TX HDMI 165MHZ 64LQFP
ADV7520BCPZ-80 IC XMITTER HDMI/DVI CEC 64LFCSP
ADV7520NKBBCZ-80 IC XMITTER HDMI/DVI LP 76CSPBGA
相关代理商/技术参数
参数描述
ADV7180WBCPZ-REEL 功能描述:IC VIDEO DECODER SDTV 40LFCSP RoHS:是 类别:集成电路 (IC) >> 线性 - 视频处理 系列:- 产品变化通告:Product Discontinuation 07/Mar/2011 标准包装:3,000 系列:OMNITUNE™ 类型:调谐器 应用:移动电话,手机,视频显示器 安装类型:表面贴装 封装/外壳:65-WFBGA 供应商设备封装:PG-WFSGA-65 包装:带卷 (TR) 其它名称:SP000365064
ADV7180WBST48Z 制造商:Analog Devices 功能描述:
ADV7180WBST48Z-RL 功能描述:视频 IC 10-bit 4x Oversampling SDTV Decoder RoHS:否 制造商:Fairchild Semiconductor 工作电源电压:5 V 电源电流:80 mA 最大工作温度:+ 85 C 封装 / 箱体:TSSOP-28 封装:Reel
ADV7180WBSTZ 功能描述:视频 IC 10-bit 4x Oversampling SDTV Decoder RoHS:否 制造商:Fairchild Semiconductor 工作电源电压:5 V 电源电流:80 mA 最大工作温度:+ 85 C 封装 / 箱体:TSSOP-28 封装:Reel
ADV7180WBSTZ-REEL 功能描述:视频 IC 10-bit 4x Oversampling SDTV Decoder RoHS:否 制造商:Fairchild Semiconductor 工作电源电压:5 V 电源电流:80 mA 最大工作温度:+ 85 C 封装 / 箱体:TSSOP-28 封装:Reel