参数资料
| 型号： | ADV7180WBCPZ |
| 厂商： | Analog Devices Inc |
| 文件页数： | 41/116页 |
| 文件大小： | 0K |
| 描述： | IC VIDEO DECODER SDTV 40LFCSP |
| 标准包装： | 1 |
| 类型： | 视频解码器 |
| 应用： | 数码相机，手机，便携式视频 |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 40-VFQFN 裸露焊盘，CSP |
| 供应商设备封装： | 40-LFCSP-VQ（6x6） |
| 包装： | 托盘 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页当前第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页第69页第70页第71页第72页第73页第74页第75页第76页第77页第78页第79页第80页第81页第82页第83页第84页第85页第86页第87页第88页第89页第90页第91页第92页第93页第94页第95页第96页第97页第98页第99页第100页第101页第102页第103页第104页第105页第106页第107页第108页第109页第110页第111页第112页第113页第114页第115页第116页
ADV7180
Data Sheet
Rev. I | Page 30 of 116
SD_OFF_Cb[7:0], SD Offset Cb Channel, Address 0xE1[7:0]
This register allows the user to select an offset for the Cb channel
only and to adjust the hue of the picture. There is a functional
overlap with the HUE[7:0] register.
Table 30. SD_OFF_Cb Function
SD_OFF_Cb[7:0]
Description
0x80 (default)
0 mV offset applied to the Cb channel
0x00
312 mV offset applied to the Cb channel
0xFF
+312 mV offset applied to the Cb channel
SD_OFF_Cr[7:0], SD Offset Cr Channel, Address 0xE2[7:0]
This register allows the user to select an offset for the Cr channel
only and to adjust the hue of the picture. There is a functional
overlap with the HUE[7:0] register.
Table 31. SD_OFF_Cr Function
SD_OFF_Cr[7:0]
Description
0x80 (default)
0 mV offset applied to the Cr channel
0x00
312 mV offset applied to the Cr channel
0xFF
+312 mV offset applied to the Cr channel
BRI[7:0], Brightness Adjust, Address 0x0A[7:0]
This register controls the brightness of the video signal. It allows
the user to adjust the brightness of the picture.
Table 32. BRI Function
BRI[7:0]
Description
0x00 (default)
Offset of the luma channel = 0 IRE
0x7F
Offset of the luma channel = +30 IRE
0x80
Offset of the luma channel = 30 IRE
HUE[7:0], Hue Adjust, Address 0x0B[7:0]
This register contains the value for the color hue adjustment. It
allows the user to adjust the hue of the picture.
HUE[7:0] has a range of ±90°, with 0x00 equivalent to an
adjustment of 0°. The resolution of HUE[7:0] is 1 bit = 0.7°.
The hue adjustment value is fed into the AM color demodulation
block. Therefore, it applies only to video signals that contain
chroma information in the form of an AM-modulated carrier
(CVBS or Y/C in PAL or NTSC). It does not affect SECAM
and does not work on component video inputs (YPrPb).
Table 33. HUE Function
HUE[7:0]
Description (Adjust Hue of the Picture)
0x00 (default)
Phase of the chroma signal = 0°
0x7F
Phase of the chroma signal = 90°
0x80
Phase of the chroma signal = +90°
DEF_Y[5:0], Default Value Y, Address 0x0C[7:2]
When the ADV7180 loses lock on the incoming video signal or
when there is no input signal, the DEF_Y[5:0] register allows
the user to specify a default luma value to be output. This value
is used under the following conditions:
If the DEF_VAL_AUTO_EN bit is set to high and the
ADV7180 has lost lock to the input video signal. This is
the intended mode of operation (automatic mode).
The DEF_VAL_EN bit is set, regardless of the lock status of
the video decoder. This is a forced mode that may be useful
during configuration.
The DEF_Y[5:0] values define the six MSBs of the output video.
The remaining LSBs are padded with 0s. For example, in 8-bit
mode, the output is Y[7:0] = {DEF_Y[5:0], 0, 0}.
For DEF_Y[5:0], 0x0D (blue) is the default value for Y.
Register 0x0C has a default value of 0x36.
DEF_C[7:0], Default Value C, Address 0x0D[7:0]
The DEF_C[7:0] register complements the DEF_Y[5:0] value. It
defines the four MSBs of Cr and Cb values to be output if
The DEF_VAL_AUTO_EN bit is set to high and the
ADV7180 cannot lock to the input video (automatic mode).
DEF_VAL_EN bit is set to high (forced output).
The data that is finally output from the ADV7180 for the
chroma side is Cr[3:0] = {DEF_C[7:4], 0, 0, 0, 0}, and
Cb[3:0] = {DEF_C[3:0], 0, 0, 0, 0}.
For DEF_C[7:0], 0x7C (blue) is the default value for Cr and Cb.
DEF_VAL_EN, Default Value Enable, Address 0x0C[0]
This bit forces the use of the default values for Y, Cr, and Cb. See
the descriptions in the DEF_Y[5:0], Default Value Y, Address
sections for additional information. In this mode, the decoder
also outputs a stable 27 MHz clock, HS, and VS.
Setting DEF_VAL_EN to 0 (default) outputs a colored screen
determined by user-programmable Y, Cr, and Cb values when
the decoder free-runs. Free-run mode is turned on and off by
the DEF_VAL_AUTO_EN bit.
Setting DEF_VAL_EN to 1 forces a colored screen output
determined by user-programmable Y, Cr, and Cb values.
This overrides picture data even if the decoder is locked.
相关PDF资料 |
PDF描述 |
|---|---|
| ADV7186BBCZ | IC VIDEO DECODER 196CSPBGA |
| ADV7441ABSTZ-5P | IC DECODER DIGITIZER 144LQFP |
| ADV7513BSWZ | IC TX HDMI 165MHZ 64LQFP |
| ADV7520BCPZ-80 | IC XMITTER HDMI/DVI CEC 64LFCSP |
| ADV7520NKBBCZ-80 | IC XMITTER HDMI/DVI LP 76CSPBGA |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADV7180WBCPZ-REEL | 功能描述:IC VIDEO DECODER SDTV 40LFCSP RoHS:是 类别:集成电路 (IC) >> 线性 - 视频处理 系列:- 产品变化通告:Product Discontinuation 07/Mar/2011 标准包装:3,000 系列:OMNITUNE™ 类型:调谐器 应用:移动电话，手机，视频显示器 安装类型:表面贴装 封装/外壳:65-WFBGA 供应商设备封装:PG-WFSGA-65 包装:带卷 (TR) 其它名称:SP000365064 |
| ADV7180WBST48Z | 制造商:Analog Devices 功能描述: |
| ADV7180WBST48Z-RL | 功能描述:视频 IC 10-bit 4x Oversampling SDTV Decoder RoHS:否 制造商:Fairchild Semiconductor 工作电源电压:5 V 电源电流:80 mA 最大工作温度:+ 85 C 封装 / 箱体:TSSOP-28 封装:Reel |
| ADV7180WBSTZ | 功能描述:视频 IC 10-bit 4x Oversampling SDTV Decoder RoHS:否 制造商:Fairchild Semiconductor 工作电源电压:5 V 电源电流:80 mA 最大工作温度:+ 85 C 封装 / 箱体:TSSOP-28 封装:Reel |
| ADV7180WBSTZ-REEL | 功能描述:视频 IC 10-bit 4x Oversampling SDTV Decoder RoHS:否 制造商:Fairchild Semiconductor 工作电源电压:5 V 电源电流:80 mA 最大工作温度:+ 85 C 封装 / 箱体:TSSOP-28 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。