
Fusion Family of Mixed Signal FPGAs
Revision 4
5-7
v2.0, Revision 1
(continued)
In
EQ 4 to
EQ 6, the junction temperature was changed from 110°C to 100°C.
Quiescent Supply Current Characteristics (IDDQ) table.
changed from VMV/VCC to VCCI.
VMV/VCC to VCCI. PDC1 was updated from TBD to 18.
The
"QN108" table was updated to remove the duplicates of pins B12 and B34.
Preliminary v1.7
(October 2008)
The version number category was changed from Advance to Preliminary, which
means the datasheet contains information based on simulation and/or initial
characterization. The information is believed to be correct, but changes are possible.
For the VIL and VIH parameters, 0.30 * VCCI was changed to 0.35 * VCCI and 0.70
The version number category was changed from Advance to Preliminary, which
means the datasheet contains information based on simulation and/or initial
characterization. The information is believed to be correct, but changes are possible.
N/A
Temperature
Digital Output
213
00 1111 1101
283
01 0001 1011
358
01 0110 0110 – only the digital output was updated.
Temperature 358 remains in the temperature column.
significantly updated but the change was not noted in the change table.
Advance v1.6
(August 2008)
The title of the datasheet changed from Actel Programmable System Chips to Actel
Fusion Mixed Signal FPGAs. In addition, all instances of programmable system chip
were changed to mixed signal FPGA.
N/A
The references to the Peripherals User’s Guide in the "No-Glitch MUX (NGMUX)"
section and "Voltage Regulator Power Supply Monitor (VRPSM)" section were
changed to Fusion Handbook.
2-32, 2-42
Advance v1.5
(July 2008)
The following bullet was updated from High-Voltage Input Tolerance: ±12 V to High-
Voltage Input Tolerance: 10.5 V to 12 V.
I
The following bullet was updated from Programmable 1, 3, 10, 30 A and 25 mA
Drive Strengths to Programmable 1, 3, 10, 30 A and 20 mA Drive Strengths.
I
Revision
Changes
Page