![](http://datasheet.mmic.net.cn/120000/RN80532KC041512_datasheet_3574254/RN80532KC041512_35.png)
Intel Xeon Processor with 512 KB L2 Cache
Datasheet
35
Table 18. Front Side Bus AC Specifications (Reset Conditions)
1. Before the de-assertion of RESET#
2. After the clock that de-asserts RESET#.
1. Unless otherwise noted, all specifications in this table apply to all processor frequencies and cache sizes.
2. Not 100% tested. Specified by design characterization.
3. All AC timings for the TAP signals are referenced to the TCK signal at 0.5 * VCC at the processor pins. All
TAP signal timings (TMS, TDI, etc) are referenced at the 0.5 * VCC processor pins.
4. Rise and fall times are measured from the 20% to 80% points of the signal swing.
5. Referenced to the rising edge of TCK.
6. Referenced to the falling edge of TCK.
7. Specification for a minimum swing defined between TAP 20% to 80%. This assumes a minimum edge rate of
0.5 V/nS.
8. TRST# must be held asserted for 2 TCK periods to be guaranteed that it is recognized by the processor.
9. It is recommended that TMS be asserted while TRST# is being deasserted..
T# Parameter
Min
Max
Unit
Figure
Notes
T45: Reset Configuration Signals (A[31:3]#,
BR[3:0]#, INIT#, SMI#) Setup Time
4BCLKs
1
T46: Reset Configuration Signals (A[31:3]#,
BR[3:0]#, INIT#, SMI#) Hold Time
220
BCLKs
2
Table 19. TAP Signal Group AC Specifications
T# Parameter
Min
Max
Unit
Figure
Notes
1,2,3,9
T55: TCK Period
60.0
nS
T56: TCK Rise Time
9.5
nS
4
T57: TCK Fall Time
9.5
nS
4
T58: TMS, TDI Rise Time
8.5
nS
4
T59: TMS, TDI Fall Time
8.5
nS
4
T61: TDI, TMS Setup Time
0
nS
5, 7
T62: TDI, TMS Hold Time
3.0
nS
5, 7
T63: TDO Clock to Output Delay
0.5
3.5
nS
6
T64: TRST# Assert Time
2.0
TTCK
8
Table 20. SMBus Signal Group AC Specifications (Page 1 of 2)
T# Parameter
Min
Max
Unit
Figure
Notes
T70: SM_CLK Frequency
10
100
KHz
1, 2, 3
T71: SM_CLK Period
10
100
S
1, 2, 3
T72: SM_CLK High Time
4.0
N/A
S
1, 2, 3
T73: SM_CLK Low Time
4.7
N/A
S
1, 2, 3
T74: SMBus Rise Time
0.02
1.0
S
1, 2, 3, 5
T75: SMBus Fall Time
0.02
0.3
S
1, 2, 3, 5
T76: SMBus Output Valid Delay
0.1
4.5
S
1, 2, 3
T77: SMBus Input Setup Time
250
N/A
nS
1, 2, 3
T78: SMBus Input Hold Time
300
N/A
nS
1, 2, 3