- 您现在的位置：买卖IC网 > PDF目录210366 > BX80532KE2000D (INTEL CORP) 32-BIT, 2000 MHz, MICROPROCESSOR, XMA PDF资料下载
参数资料
| 型号： | BX80532KE2000D |
| 厂商： | INTEL CORP |
| 元件分类： | 微控制器/微处理器 |
| 英文描述： | 32-BIT, 2000 MHz, MICROPROCESSOR, XMA |
| 文件页数： | 78/102页 |
| 文件大小： | 1464K |
| 代理商： | BX80532KE2000D |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页第69页第70页第71页第72页第73页第74页第75页第76页第77页当前第78页第79页第80页第81页第82页第83页第84页第85页第86页第87页第88页第89页第90页第91页第92页第93页第94页第95页第96页第97页第98页第99页第100页第101页第102页
Intel Xeon Processor with 533 MHz Front Side Bus at 2 GHz to 3.20 GHz
77
Since the AGTL+ signal pins receive power from the front side bus, these pins should not be driven
(allowing the level to return to VCC) for minimum power drawn by the termination resistors in this
state. In addition, all other input pins on the front side bus should be driven to the inactive state.
BINIT# will be recognized while the processor is in Stop-Grant state. If STPCLK# is still asserted
at the completion of the BINIT# bus initialization, the processor will remain in Stop-Grant mode. If
the STPCLK# is not asserted at the completion of the BINIT# bus initialization, the processor will
return to Normal state.
RESET# will cause the processor to immediately initialize itself, but the processor will stay in
Stop-Grant state. A transition back to the Normal state will occur with the deassertion of the
STPCLK# signal. When re-entering the Stop-Grant state from the sleep state, STPCLK# should
only be deasserted one or more bus clocks after the deassertion of SLP#.
A transition to the HALT/Grant Snoop state will occur when the processor detects a snoop on the
front side bus (see Section 6.2.4). A transition to the Sleep state (see Section 6.2.5) will occur with
the assertion of the SLP# signal.
While in the Stop-Grant state, INIT#, BINIT# and LINT[1:0] will be latched by the processor, and
only serviced when the processor returns to the Normal state. Only one occurrence of each event
will be recognized upon return to the Normal state.
6.2.4
HALT/Grant Snoop State—State 4
The processor will respond to snoop transactions on the front side bus while in Stop-Grant state or
in AutoHALT Power Down state. During a snoop transaction, the processor enters the HALT/Grant
Snoop state. The processor will stay in this state until the snoop on the front side bus has been
serviced (whether by the processor or another agent on the front side bus). After the snoop is
serviced, the processor will return to the Stop-Grant state or AutoHALT Power Down state, as
appropriate.
6.2.5
Sleep State—State 5
The Sleep state is a very low power state in which each processor maintains its context, maintains
the phase-locked loop (PLL), and has stopped most of internal clocks. The Sleep state can only be
entered from Stop-Grant state. Once in the Stop-Grant state, the SLP# pin can be asserted, causing
the processor to enter the Sleep state. The SLP# pin is not recognized in the Normal or AutoHALT
states.
Snoop events that occur while in Sleep state or during a transition into or out of Sleep state will
cause unpredictable behavior.
In the Sleep state, the processor is incapable of responding to snoop transactions or latching
interrupt signals. No transitions or assertions of signals (with the exception of SLP# or RESET#)
are allowed on the front side bus while the processor is in Sleep state. Any transition on an input
signal before the processor has returned to Stop-Grant state will result in unpredictable behavior.
If RESET# is driven active while the processor is in the Sleep state, and held active as specified in
the RESET# pin specification, then the processor will reset itself, ignoring the transition through
Stop-Grant state. If RESET# is driven active while the processor is in the Sleep state, the SLP# and
STPCLK# signals should be deasserted immediately after RESET# is asserted to ensure the
processor correctly executes the reset sequence.
相关PDF资料 |
PDF描述 |
|---|---|
| BX80532KC1900E | 1900 MHz, MICROPROCESSOR |
| BU-61582D0-290S | 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQIP70 |
| BU-61582D0-300K | 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQIP70 |
| BU-61582D1-391Q | 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQIP70 |
| BU-61582D1-410S | 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQIP70 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| BX80532KE2000DU | 制造商:Intel 功能描述:XEON 2.0GHZ 533FSB 1U - Boxed Product (Development Kits) |
| BX80532KE2400DSL73L | 制造商:Intel 功能描述: |
| BX80532KE2400E | 制造商:Intel 功能描述:MPU XEON PROCESSOR NETBURST 64-BIT 0.13UM 2.4GHZ - Boxed Product (Development Kits) |
| BX80532KE2400EU | 制造商:Intel 功能描述:MPU XEON PROCESSOR NETBURST 64-BIT 0.13UM 2.4GHZ - Boxed Product (Development Kits) |
| BX80532KE2667D | 制造商:Intel 功能描述:MPU XEON PROCESSOR NETBURST 64-BIT 0.13UM 2.66GHZ - Boxed Product (Development Kits) |
发布紧急采购，3分钟左右您将得到回复。