参数资料
型号: DS21FF44N
厂商: DALLAS SEMICONDUCTOR
元件分类: Digital Transmission Controller
英文描述: DATACOM, FRAMER, PBGA300
封装: 27 X 27 MM, BGA-300
文件页数: 21/110页
文件大小: 526K
代理商: DS21FF44N
DS21FT44/DS21FF44
18 of 110
6. DS21Q44 INTRODUCTION
The DS21Q44 is a superset version of the popular DS21Q43 Quad E1 framer offering the new features
listed below. All of the original features of the DS21Q43 have been retained and software created for the
original device is transferable to the DS21Q44.
New Features
Aditional hardware signaling capability including:
– receive signaling reinsertion to a backplane multiframe sync
– availability of signaling in a separate PCM data stream
– signaling freezing
– interrupt generated on change of signaling data
Per–channel code insertion in both transmit and receive paths
Full HDLC controller with 64–byte buffers in both transmit and receive paths. Configurable for
Sa bits or DS0 access
RCL, RLOS, RRA, and RUA1 alarms now interrupt on change of state
8.192 MHz clock synthesizer
Ability to monitor one DS0 channel in both the transmit and receive paths
Option to extend carrier loss criteria to a 1 ms period as per ETS 300 233
Automatic RAI generation to ETS 300 011 specifications
IEEE 1149.1 support
Functional Description
The receive side in each framer locates FAS frame and CRC and CAS multiframe boundaries as well as
detects incoming alarms including, carrier loss, loss of synchronization, AIS and Remote Alarm. If
needed, the receive side elastic store can be enabled in order to absorb the phase and frequency
differences between the recovered E1 data stream and an asynchronous backplane clock which is
provided at the RSYSCLK input. The clock applied at the RSYSCLK input can be either a 2.048 MHz
clock or a 1.544 MHz clock. The RSYSCLK can be a burst clock with speeds up to 8.192 MHz.
The transmit side in each framer is totally independent from the receive side in both the clock
requirements and characteristics. Data off of a backplane can be passed through a transmit side elastic
store if necessary. The transmit formatter will provide the necessary frame/multiframe data overhead for
E1 transmission.
相关PDF资料
PDF描述
DS21FT40N DATACOM, FRAMER, PBGA300
DS21FT40 DATACOM, FRAMER, PBGA300
DS21FT42 DATACOM, FRAMER, PBGA300
DS21FT42N DATACOM, FRAMER, PBGA300
DS21FF42 DATACOM, FRAMER, PBGA300
相关代理商/技术参数
参数描述
DS21FT40 制造商:DALLAS 制造商全称:Dallas Semiconductor 功能描述:Four x Three 12 Channel E1 Framer
DS21FT40N 制造商:Rochester Electronics LLC 功能描述: 制造商:Maxim Integrated Products 功能描述:
DS21FT42 功能描述:网络控制器与处理器 IC 4x4 16/4x3 12 Chnl T1/T1 Framer RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流(最大值):595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS21FT42N 功能描述:网络控制器与处理器 IC 4x4 16/4x3 12 Chnl T1/T1 Framer RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流(最大值):595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS21FT44 功能描述:网络控制器与处理器 IC RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流(最大值):595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray