收藏本站
参数资料
型号： DS3141+
厂商： Maxim Integrated Products
文件页数： 54/88页
文件大小： 0K
描述： IC FRAMER DS3/E3 SNGL 144CSBGA
产品培训模块： Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
标准包装： 160
控制器类型： DS3/E3 调帧器
接口： LIU
电源电压： 3.135 V ~ 3.465 V
电流 - 电源： 80mA
工作温度： -40°C ~ 85°C
安装类型： 表面贴装
封装/外壳： 144-BGA，CSPBGA
供应商设备封装： 144-TECSBGA（13x13）
包装： 托盘
DS3141/DS3142/DS3143/DS3144 Single/Dual/Triple/Quad DS3/E3 Framers
58 of 88
Bit 7: Receive FIFO Overrun Latched (ROVRL). This latched status bit is set to 1 each time the receive FIFO
overruns. ROVRL is cleared when the host processor writes a 1 to it and is not set again until another overrun
occurs (i.e., the FIFO has been read from and then allowed to fill up again). When ROVRL is set, it can cause a
hardware interrupt to occur if the ROVRIE bit in the HSRIE register and the HDLCIE bit in the MSRIE register are
both set to 1. The interrupt is cleared when this bit is cleared or one or both of the interrupt-enable bits are cleared.
Register Name:
HSRIE
Register Description:
HDLC Status Register Interrupt Enable
Register Address:
56h
Bit #
7
6
5
4
3
2
1
0
Name
ROVRIE
RPEIE
RPSIE
RABTIE
RHWMIE
TLWMIE
TUDRIE
TENDIE
Default
0
Bit 0: Transmit Packet-End Interrupt Enable (TENDIE). This bit enables an interrupt if the TENDL bit in the
HSRL register is set.
0 = interrupt disabled
1 = interrupt enabled
Bit 1: Transmit FIFO Underrun Interrupt Enable (TUDRIE). This bit enables an interrupt if the TUDRL bit in the
HSRL register is set.
0 = interrupt disabled
1 = interrupt enabled
Bit 2: Transmit FIFO Low Watermark Interrupt Enable (TLWMIE). This bit enables an interrupt if the TLWML bit
in the HSRL register is set.
0 = interrupt disabled
1 = interrupt enabled
Bit 3: Receive FIFO High Watermark Interrupt Enable (RHWMIE). This bit enables an interrupt if the RHWML bit
in the HSRL register is set.
0 = interrupt disabled
1 = interrupt enabled
Bit 4: Receive Abort Sequence Detected Interrupt Enable (RABTIE). This bit enables an interrupt if the RABTL
bit in the HSRL register is set.
0 = interrupt disabled
1 = interrupt enabled
Bit 5: Receive Packet-Start Interrupt Enable (RPSIE). This bit enables an interrupt if the RPSL bit in the HSRL
register is set.
0 = interrupt disabled
1 = interrupt enabled
Bit 6: Receive Packet-End Interrupt Enable (RPEIE). This bit enables an interrupt if the RPEL bit in the HSRL
register is set.
0 = interrupt disabled
1 = interrupt enabled
Bit 7: Receive FIFO Overrun-Interrupt Enable (ROVRIE). This bit enables an interrupt if the ROVRL bit in the
HSRL register is set.
0 = interrupt disabled
1 = interrupt enabled
相关PDF资料
PDF描述
DS31412N IC 12CH DS3/3 FRAMER 349-BGA
DS3150TN IC LIU T3/E3/STS-1 IND 48-TQFP
DS3154N+ IC LIU DS3/E3/STS-1 QD 144CSBGA
DS3164+ IC ATM/PACKET PHY QUAD 400-BGA
DS3170+ IC TXRX DS3/E3 100-CSBGA
相关代理商/技术参数
参数描述
DS3141+ 功能描述:网络控制器与处理器 IC Single DS3/E3 Framer RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流（最大值）:595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS314-1010NR WAF 制造商:ON Semiconductor 功能描述:
DS31412 功能描述:网络控制器与处理器 IC 12 Port DS3/E3 Framer RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流（最大值）:595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS31412N 功能描述:网络控制器与处理器 IC 12 Port DS3/E3 Framer RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流（最大值）:595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS31415 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:3-Input, 4-Output, Single DPLL Timing IC with Sub-ps Output Jitter and 1588 Clock
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*