参数资料
型号: IDT82P20416DBFG
厂商: IDT, Integrated Device Technology Inc
文件页数: 60/121页
文件大小: 0K
描述: IC LIU T1/E1/J1 16CH SH 484BGA
标准包装: 84
功能: 线路接口单元(LIU)
接口: E1,J1,T1
电路数: 16
电源电压: 1.8V, 3.3V
功率(瓦特): 3.10W
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 484-LFBGA
供应商设备封装: 484-CABGA(19x19)
包装: 托盘
包括: AIS 警报检测器和发生器,回送功能,PRBS 发生器 / 检测器,远程检测器和发生器
IDT82P20416
16-CHANNEL SHORT HAUL T1/E1/J1 LINE INTERFACE UNIT
Functional Description
43
December 17, 2009
3.5.7.2 Remote Loopback
Remote Loopback can be configured manually or automatically.
Either manual Remote Loopback configuration or automatic Remote
Loopback configuration will enable Remote Loopback.
Manual Remote Loopback is enabled by the RLP bit (b1, LOOP,...).
Automatic Remote Loopback is enabled when the pattern detection
is assigned in the receive path (i.e., the PD_POS bit (b3, PD,...) is ‘0’)
and the AUTOLP bit (b3, LOOP,...) is ‘1’. The corresponding channel will
enter Remote Loopback when the activate IB code is detected in the
receive path for more than 5.1 sec.; and will return from Remote Loop-
back when the deactivate IB code is detected in the receive path for
more than 5.1 sec. Refer to section Inband Loopback (IB) Detection on
page 40 for details. When automatic Remote Loopback is active, setting
the AUTOLP bit (b3, LOOP,...) back to ‘0’ will also stop automatic
Remote Loopback. The setting of the PD_POS bit (b3, PD,...) should not
be changed during automatic Remote Loopback. The AUTOLP_S bit
(b7, STAT0,...) indicates the automatic Remote Loopback status.
In Remote Loopback mode, the data stream output from the RJA (if
enabled) is internally looped to the Waveform Shaper. The data stream
received from the line side is still output to the system side, while the
data stream input from the system side is covered by the Remote Loop-
back data and the status on TCLKn does not affect the Remote Loop-
back. However, the BPV/CV, EXZ, SLOS, AIS and pattern detection in
the transmit path still monitors the data stream input from the system
side.
In Remote Loopback mode, the priority of the diagnostic facilities in
the receive path is: pattern generation > AIS generation; the priority of
the diagnostic facilities in the transmit path is: pattern generation >
looped data. AIS generation is disabled in the transmit path. Refer to
Figure-26 Priority Of Diagnostic Facilities During Manual Remote Loopback
Tx path
BPV/CV, EXZ, SLOS,
AIS, pattern detection
Pattern generation
Auto AIS
generation
X
Rx path
LLOS, AIS
detection
AIS generation
BPV/CV, EXZ,
pattern detection
Pattern generation
Remote
Loopback
相关PDF资料
PDF描述
IDT82P20516DBFG IC LIU T1/E1/J1 16CH SH 484BGA
IDT82P2281PF TXRX T1/E1/J1 LONG/SHORT 80-TQFP
IDT82P2282PF TXRX T1/J1/E1 2CHAN 100-TQFP
IDT82P2284BB TXRX T1/J1/E1 4CHAN 208-PBGA
IDT82P2288BBG TXRX OCTAL T1/E1/J1 256-PBGA
相关代理商/技术参数
参数描述
IDT82P20416DBFG8 制造商:Integrated Device Technology Inc 功能描述:IC LIU T1/E1/J1 16CH SH 484BGA
IDT82P20416DBFGBLANK 制造商:IDT 制造商全称:Integrated Device Technology 功能描述:16-Channel Short Haul T1/E1/J1 Line Interface Unit
IDT82P20516 制造商:IDT 制造商全称:Integrated Device Technology 功能描述:16-Channel Short Haul E1 Line Interface Unit
IDT82P20516BFBLANK 制造商:IDT 制造商全称:Integrated Device Technology 功能描述:16-Channel Short Haul E1 Line Interface Unit
IDT82P20516BFGBLANK 制造商:IDT 制造商全称:Integrated Device Technology 功能描述:16-Channel Short Haul E1 Line Interface Unit