参数资料
型号: IDT82P20416DBFG
厂商: IDT, Integrated Device Technology Inc
文件页数: 61/121页
文件大小: 0K
描述: IC LIU T1/E1/J1 16CH SH 484BGA
标准包装: 84
功能: 线路接口单元(LIU)
接口: E1,J1,T1
电路数: 16
电源电压: 1.8V, 3.3V
功率(瓦特): 3.10W
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 484-LFBGA
供应商设备封装: 484-CABGA(19x19)
包装: 托盘
包括: AIS 警报检测器和发生器,回送功能,PRBS 发生器 / 检测器,远程检测器和发生器
IDT82P20416
16-CHANNEL SHORT HAUL T1/E1/J1 LINE INTERFACE UNIT
Functional Description
44
December 17, 2009
3.5.7.3 Digital Loopback
The Digital Loopback can be configured manually or automatically.
Either manual Digital Loopback configuration or automatic Digital Loop-
back configuration will enable Digital Loopback.
Manual Digital Loopback is enabled by the DLP bit (b2, LOOP,...).
Automatic Digital Loopback is enabled when the pattern detection is
assigned in the transmit path (i.e., the PD_POS bit (b3, PD,...) is ‘1’) and
the AUTOLP bit (b3, LOOP,...) is ‘1’. The corresponding channel will
enter Digital Loopback when the activate IB code is detected in the
transmit path for more than 5.1 sec.; and will return from Digital Loop-
back when the deactivate IB code is detected in the transmit path for
more than 5.1 sec. Refer to section Inband Loopback (IB) Detection on
page 40 for details. When automatic Digital Loopback is active, setting
the AUTOLP bit (b3, LOOP,...) back to ‘0’ will also stop automatic Digital
Loopback. The setting of the PD_POS bit (b3, PD,...) should not be
changed during automatic Digital Loopback. The AUTOLP_S bit (b7,
STAT0,...) indicates the automatic Digital Loopback status.
In Digital Loopback mode, the data stream output from the TJA (if
enabled) is internally looped to the Decoder (if enabled). The data
stream to be transmitted is still output to the line side, while the data
stream received from the line side is covered by the Digital Loopback
data. However, LLOS and AIS detection in the receive path still monitors
the data stream received from the line side.
In Digital Loopback mode, the priority of the diagnostic facilities in the
receive path is: pattern generation > looped data; the priority of the diag-
nostic facilities in the transmit path is: pattern generation > looped data >
AIS generation. AIS generation is disabled in the receive path.
Figure-27 Priority Of Diagnostic Facilities During Digital Loopback
Tx path
BPV/CV, EXZ,
SLOS, AIS, pattern
detection
Pattern generation
Auto AIS
generation
Rx path
LLOS, AIS
detection
AIS generation
X
BPV/CV, EXZ,
AIS, pattern
detection
Pattern generation
Digital
Loopback
相关PDF资料
PDF描述
IDT82P20516DBFG IC LIU T1/E1/J1 16CH SH 484BGA
IDT82P2281PF TXRX T1/E1/J1 LONG/SHORT 80-TQFP
IDT82P2282PF TXRX T1/J1/E1 2CHAN 100-TQFP
IDT82P2284BB TXRX T1/J1/E1 4CHAN 208-PBGA
IDT82P2288BBG TXRX OCTAL T1/E1/J1 256-PBGA
相关代理商/技术参数
参数描述
IDT82P20416DBFG8 制造商:Integrated Device Technology Inc 功能描述:IC LIU T1/E1/J1 16CH SH 484BGA
IDT82P20416DBFGBLANK 制造商:IDT 制造商全称:Integrated Device Technology 功能描述:16-Channel Short Haul T1/E1/J1 Line Interface Unit
IDT82P20516 制造商:IDT 制造商全称:Integrated Device Technology 功能描述:16-Channel Short Haul E1 Line Interface Unit
IDT82P20516BFBLANK 制造商:IDT 制造商全称:Integrated Device Technology 功能描述:16-Channel Short Haul E1 Line Interface Unit
IDT82P20516BFGBLANK 制造商:IDT 制造商全称:Integrated Device Technology 功能描述:16-Channel Short Haul E1 Line Interface Unit