参数资料
型号: ISL6308ACRZ
厂商: Intersil
文件页数: 1/28页
文件大小: 0K
描述: IC CTRLR PWM BUCK 3PHASE 40-QFN
标准包装: 500
应用: 控制器,DDR
输入电压: 5 V ~ 12 V
输出数: 1
输出电压: 0.6 V ~ 2.3 V
工作温度: 0°C ~ 70°C
安装类型: 表面贴装
封装/外壳: 40-VFQFN 裸露焊盘
供应商设备封装: 40-QFN(6x6)
包装: 管件
?
ISL6308A
Data Sheet
September 9, 2008
FN6669.0
Three-Phase Buck PWM Controller with
High Current Integrated MOSFET Drivers
The ISL6308A is a three-phase PWM control IC with
integrated MOSFET drivers. It provides a precision voltage
regulation system for multiple applications including, but not
limited to, high current low voltage point-of-load converters,
embedded applications and other general purpose low
voltage medium to high current applications.The integration
of power MOSFET drivers into the controller IC marks a
departure from the separate PWM controller and driver
configuration of previous multi-phase product families. By
reducing the number of external parts, this integration allows
for a cost and space saving power management solution.
Output voltage can be programmed using the on-chip DAC
or an external precision reference. A two bit code programs
the DAC reference to one of 4 possible values (0.6V,
0.9V,1.2V and 1.5V). A unity gain, differential amplifier is
provided for remote voltage sensing, compensating for any
potential difference between remote and local grounds. The
output voltage can also be offset through the use of single
external resistor. An optional droop function is also
implemented and can be disabled for applications having
less stringent output voltage variation requirements or
experiencing less severe step loads.
A unique feature of the ISL6308A is the combined use of
both DCR and r DS(ON) current sensing. Load line voltage
positioning and overcurrent protection are accomplished
through continuous inductor DCR current sensing, while
r DS(ON) current sensing is used for accurate channel-current
balance. Using both methods of current sampling utilizes the
best advantages of each technique.
Protection features of this controller IC include a set of
sophisticated overvoltage and overcurrent protection.
Overvoltage results in the converter turning the lower
MOSFETs ON to clamp the rising output voltage and protect
the load. An OVP output is also provided to drive an optional
crowbar device. The overcurrent protection level is set
through a single external resistor. Other protection features
include protection against an open circuit on the remote
sensing inputs. Combined, these features provide advanced
protection for the output load.
Ordering Information
Features
? Integrated Multi-Phase Power Conversion
- 1-, 2-, or 3-Phase Operation
? Precision Output Voltage Regulation
- Differential Remote Voltage Sensing
- ±0.8% System Accuracy Over-Temperature
(for REF=0.6V and 0.9V)
- ±0.5% System Accuracy Over-Temperature
(for REF=1.2V and 1.5V)
- Usable for Output Voltages not Exceeding 2.3V
- Adjustable Reference-Voltage Offset
? Precision Channel Current Sharing
- Uses Loss-Less r DS(ON) Current Sampling
? Optional Load Line (Droop) Programming
- Uses Loss-Less Inductor DCR Current Sampling
? Variable Gate-Drive Bias - 5V to 12V
? Internal or External Reference Voltage Setting
- On-Chip Adjustable Fixed DAC Reference Voltage with
2-bit Logic Input Selects from Four Fixed Reference
Voltages (0.6V, 0.9V, 1.2V, 1.5V)
- Reference can be Changed Dynamically
- Can use an External Voltage Reference
? Overcurrent Protection
? Multi-tiered Overvoltage Protection
- OVP Pin to Drive Optional Crowbar Device
? Selectable Operation Frequency up to 1.5MHz per Phase
? Digital Soft-Start
? Capable of Start-up in a Pre-Biased Load
? Pb-Free (RoHS Compliant)
Applications
? High Current DDR/Chipset Core Voltage Regulators
? High Current, Low Voltage DC/DC Converters
? High Current, Low Voltage FPGA/ASIC DC/DC Converters
PART
PART
TEMP. RANGE
PKG.
NUMBER
ISL6308ACRZ* (Note)
ISL6308AIRZ* (Note)
MARKING
6308A CRZ
6308A IRZ
(°C)
0 to +70
-40 to +85
PACKAGE
40 Ld 6x6 QFN (Pb-free)
40 Ld 6x6 QFN (Pb-free)
DWG. #
L40.6x6
L40.6x6
ISL6308AEVAL1Z
Evaluation Platform
NOTE: These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach materials, and 100% matte
tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations). Intersil Pb-free
products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2008. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
相关PDF资料
PDF描述
ACM18DSEF-S13 CONN EDGECARD EXTEND 36POS 0.156
X40015S8I-CT1 IC VOLTAGE MONITOR DUAL 8-SOIC
RSC26DRTH-S13 CONN EDGECARD 52POS .100 EXTEND
ACM24DRYN-S13 CONN EDGECARD EXTEND 48POS 0.156
ESA32DTKN CONN EDGECARD 64POS DIP .125 SLD
相关代理商/技术参数
参数描述
ISL6308ACRZR5609 制造商:Intersil Corporation 功能描述:PB-FREE DAC-LESS MULTI-PHASE PWM CONTR W/3-DRIVERS, HARD WI - Rail/Tube
ISL6308ACRZ-T 功能描述:IC CTRLR PWM BUCK 3PHASE 40-QFN RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - 专用型 系列:- 标准包装:43 系列:- 应用:控制器,Intel VR11 输入电压:5 V ~ 12 V 输出数:1 输出电压:0.5 V ~ 1.6 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:48-VFQFN 裸露焊盘 供应商设备封装:48-QFN(7x7) 包装:管件
ISL6308ACRZ-TR5609 制造商:Intersil Corporation 功能描述:PB-FREE DAC-LESS MULTI-PHASE PWM CONTR W/3-DRIVERS, HARD WIR - Tape and Reel
ISL6308AEVAL1Z 功能描述:EVALUATION BOARD FOR ISL6308A RoHS:是 类别:编程器,开发系统 >> 评估板 - DC/DC 与 AC/DC(离线)SMPS 系列:- 产品培训模块:Obsolescence Mitigation Program 标准包装:1 系列:True Shutdown™ 主要目的:DC/DC,步升 输出及类型:1,非隔离 功率 - 输出:- 输出电压:- 电流 - 输出:1A 输入电压:2.5 V ~ 5.5 V 稳压器拓扑结构:升压 频率 - 开关:3MHz 板类型:完全填充 已供物品:板 已用 IC / 零件:MAX8969
ISL6308AIRZ 功能描述:IC CTRLR PWM BUCK 3PHASE 40-QFN RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - 专用型 系列:- 标准包装:43 系列:- 应用:控制器,Intel VR11 输入电压:5 V ~ 12 V 输出数:1 输出电压:0.5 V ~ 1.6 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:48-VFQFN 裸露焊盘 供应商设备封装:48-QFN(7x7) 包装:管件