收藏本站
参数资料
型号： KSZ8864RMN-EVAL
厂商： Micrel Inc
文件页数： 32/111页
文件大小： 0K
描述： BOARD EVALUATION FOR KSZ8864RMN
标准包装： 1
主要目的： 接口，以太网控制器（PHY 和 MAC）
嵌入式： 否
已用 IC / 零件： KSZ8864RMN
已供物品： 板
相关产品： 576-3787-ND - IC ETHERNET SW 4PORT 64QFN
其它名称： 576-3869
1997 Microchip Technology Inc.
DS30444E - page 27
PIC16C9XX
4.2.2.5
PIR1 REGISTER
This register contains the individual ag bits for the
peripheral interrupts.
Note:
Interrupt ag bits get set when an interrupt
condition occurs regardless of the state of
its corresponding enable bit or the global
enable bit, GIE (INTCON<7>). User soft-
ware should ensure the appropriate inter-
rupt ag bits are clear prior to enabling an
interrupt.
FIGURE 4-7:
PIR1 REGISTER (ADDRESS 0Ch)
R/W-0
U-0
R/W-0
LCDIF
ADIF(1)
—
SSPIF
CCP1IF
TMR2IF
TMR1IF
R
= Readable bit
W = Writable bit
U
= Unimplemented bit,
read as ‘0’
- n = Value at POR reset
bit7
bit0
bit 7:
LCDIF: LCD Interrupt Flag bit
1 = LCD interrupt occurred (must be cleared in software)
0 = LCD interrupt did not occur
bit 6:
ADIF: A/D Converter Interrupt Flag bit(1)
1 = An A/D conversion completed (must be cleared in software)
0 = The A/D conversion is not complete
bit 5-4: Unimplemented: Read as '0'
bit 3:
SSPIF: Synchronous Serial Port Interrupt Flag bit
1 = The transmission/reception is complete (must be cleared in software)
0 = Waiting to transmit/receive
bit 2:
CCP1IF: CCP1 Interrupt Flag bit
Capture Mode
1 = A TMR1 register capture occurred (must be cleared in software)
0 = No TMR1 register capture occurred
Compare Mode
1 = A TMR1 register compare match occurred (must be cleared in software)
0 = No TMR1 register compare match occurred
PWM Mode
Unused in this mode
bit 1:
TMR2IF: TMR2 to PR2 Match Interrupt Flag bit
1 = TMR2 to PR2 match occurred (must be cleared in software)
0 = No TMR2 to PR2 match occurred
bit 0:
TMR1IF: TMR1 Overow Interrupt Flag bit
1 = TMR1 register overowed (must be cleared in software)
0 = TMR1 register did not overow
Note 1: Bit ADIF is reserved on the PIC16C923, always maintain this bit clear.
Interrupt ag bits get set when an interrupt condition occurs regardless of the state of its corresponding enable bit or the
global enable bit, GIE (INTCON<7>). User software should ensure the appropriate interrupt ag bits are clear prior to
enabling an interrupt.
相关PDF资料
PDF描述
362A024-3/42-0 BOOT MOLDED
0210391088 CABLE JUMPER 1MM .203M 37POS
570-002-744-200 ASSEMBLY RECEPT 2 POS WATERPROOF
202D285-4/42-0 BOOT MOLDED
0210391087 CABLE JUMPER 1MM .178M 37POS
相关代理商/技术参数
参数描述
KSZ8864RMNI 功能描述:以太网 IC 4-Port 10/100 Ethernet Switch w/ 2x PHYs and 2x MAC Interface - Industrial Temp RoHS:否 制造商:Micrel 产品:Ethernet Switches 收发器数量:2 数据速率:10 Mb/s, 100 Mb/s 电源电压-最大:1.25 V, 3.45 V 电源电压-最小:1.15 V, 3.15 V 最大工作温度:+ 85 C 封装 / 箱体:QFN-64 封装:Tray
KSZ8864RMNU 功能描述:以太网 IC 4-Port 10/100BT Switch with MII/RMII (Automotive) RoHS:否 制造商:Micrel 产品:Ethernet Switches 收发器数量:2 数据速率:10 Mb/s, 100 Mb/s 电源电压-最大:1.25 V, 3.45 V 电源电压-最小:1.15 V, 3.15 V 最大工作温度:+ 85 C 封装 / 箱体:QFN-64 封装:Tray
KSZ8864RMNU TR 制造商:Micrel Inc 功能描述:IC ETHERNET SWITCH 4PORT 64MLF
KSZ8873FLL 功能描述:以太网 IC 3-Port Fast Ethernet Switch with 2x FX Ports - Lead free RoHS:否 制造商:Micrel 产品:Ethernet Switches 收发器数量:2 数据速率:10 Mb/s, 100 Mb/s 电源电压-最大:1.25 V, 3.45 V 电源电压-最小:1.15 V, 3.15 V 最大工作温度:+ 85 C 封装 / 箱体:QFN-64 封装:Tray
KSZ8873FLL-EVAL 功能描述:以太网开发工具 3-Port Fast Ethernet Switch with 2x FX Ports - Evaluation Board RoHS:否 制造商:Micrel 产品:Evaluation Boards 类型:Ethernet Transceivers 工具用于评估:KSZ8873RLL 接口类型:RMII 工作电源电压:
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*