- 您现在的位置：买卖IC网 > PDF目录369885 > LXT350PE PCM TRANSCEIVER|SINGLE|CEPT PCM-30/E-1|CMOS|LDCC|28PIN|PLASTIC PDF资料下载
参数资料
| 型号： | LXT350PE |
| 英文描述： | PCM TRANSCEIVER|SINGLE|CEPT PCM-30/E-1|CMOS|LDCC|28PIN|PLASTIC |
| 中文描述： | 的PCM收发器|单|优税PCM-30/E-1 |的CMOS | LDCC | 28脚|塑料 |
| 文件页数： | 26/50页 |
| 文件大小： | 1197K |
| 代理商： | LXT350PE |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页当前第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页
LXT350
—
T1/E1 Short Haul Transceiver with Crystal-less Jitter Attenuation
26
Datasheet
CODEV detection is not available in Hardware mode. In Host mode, HDB3 code violation
detection is enabled when the HDB3 encoders/decoders are enabled. This requires that
CR1.ENCENB = 1, also CR1.EC3:1 = 000, which establishes E1 operation. To select CODEV
detection, set bit CR4.CODEV = 1.
2.7.3.6
HDB3 Zero Substitution Violation Detection
(ZEROV)
An HDB3 ZEROV is the receipt of four or more consecutive zeros. This does not occur with
correctly encoded HDB3 data unless there are transmission errors. The BPV pin goes High for a
full RCLK cycle to report a ZEROV. Note that when ZEROV detection enabled, the BPV pin will
also indicate received BPVs and CODEVs, if these detection options are enabled.
ZEROV detection is not available in Hardware mode. In Host mode, HDB3 zero substitution
violation (ZEROV) detection is enabled when the HDB3 encoders/decoders are enabled. This
requires CR1.ENCENB = 1, also CR1.EC3:1 = 000, which establishes E1 operation. To select
ZEROV detection, set bit CR4.ZEROV = 1.
2.7.4
Alarm Condition Monitoring
2.7.4.1
Loss of Signal
(LOS)
The Loss of Signal (LOS) monitor function is compatible with ITU G.775 and ETSI 300233. The
receiver LOS monitor loads a digital counter at the RCLK frequency. The count increments with
each received 0 and the counter resets to 0 on receipt of a 1. When the count reaches
“
n
”
0s, the
LOS flag goes High, and the MCLK replaces the recovered clock at the RCLK output in a smooth
transition. For Hardware mode T1 operations, the number of 0s, n = 175, and for Hardware mode
E1 operations, n = 32. In Host mode, either number can be changed to 2048 by setting bit
CR4.LOS2048 to 1.
For T1 operation, when the received signal has 12.5% 1
’
s density (16 marks in a sliding 128-bit
period, with fewer than 100 consecutive 0s), the LOS flag returns Low and the recovered clock
replaces MCLK at the RCLK output in another smooth transition.
For E1 operation, the LOS condition is cleared when the received signal has 12.5% 1
’
s density
(four 1s in a sliding 32-bit window with fewer than 16 consecutive 0s). In E1 Host mode operation,
the out-of-LOS criterion can be modified from 12.5% marks density to 32 consecutive marks by
setting bit CR4.COL32CM = 1.
During LOS, the device sends received data to the RPOS/RNEG pins (or RDATA in Unipolar
mode). In Hardware and Host modes, the LOS pin goes High when a LOS condition occurs. In
Host mode, bit PSR.LOS =1 indicates a LOS condition, and will generate an interrupt if so
programmed.
2.7.4.2
Alarm Indication Signal Detection
(AIS)
This function is only available in Host mode. The receiver detects an AIS pattern when it receives
fewer than three 0s in any string of 2048 bits. The device clears the AIS condition when it receives
three or more 0s in a string of 2048 bits.
The AIS bit in the Performance Status Register indicates AIS detection. Whenever the AIS status
changes, bit TSR.TAIS =1. Unless masked, a change of AIS status generates an interrupt.
相关PDF资料 |
PDF描述 |
|---|---|
| LXT361LE | Telecommunication IC |
| LXT361PE | Telecommunication IC |
| LXT362LE | PCM TRANSCEIVER|SINGLE|T-1(DS1)|CMOS|QFP|44PIN|PLASTIC |
| LXT362PE | PCM TRANSCEIVER|SINGLE|T-1(DS1)|CMOS|LDCC|28PIN|PLASTIC |
| LXT362QE | PCM TRANSCEIVER|SINGLE|T-1(DS1)|CMOS|QFP|44PIN|PLASTIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LXT350QE | 制造商:LEVEL1 功能描述: |
| LXT351 | 制造商:INTEL 制造商全称:Intel Corporation 功能描述:T1/E1 Short Haul Transceiver with Crystal-less Jitter Attenuation |
| LXT351PE | 制造商:INTEL 制造商全称:Intel Corporation 功能描述:PCM TRANSCEIVER|SINGLE|CEPT PCM-30/E-1|CMOS|LDCC|28PIN|PLASTIC |
| LXT351QE | 制造商:INTEL 制造商全称:Intel Corporation 功能描述:PCM TRANSCEIVER|SINGLE|CEPT PCM-30/E-1|CMOS|QFP|44PIN|PLASTIC |
| LXT360 | 制造商:LVL1 制造商全称:LVL1 功能描述:Integrated T1/E1 LH/SH Transceivers for DS1/DSX-1/CSU or NTU/ISDN PRI Applications |
发布紧急采购，3分钟左右您将得到回复。