参数资料
型号: M306V8FJFP
元件分类: 微控制器/微处理器
英文描述: 16-BIT, FLASH, 16 MHz, MICROCONTROLLER, PQFP116
封装: 20 X 20 MM, 0.65 MM PITCH, PLASTIC, LQFP-116
文件页数: 24/77页
文件大小: 2650K
代理商: M306V8FJFP
M306V8FJFP
Rev.1.31
Apr 18, 2005
page 28 of 363
REJ03B0082-0131
Processor Mode
(1) Types of Processor Mode
Three processor modes are available to choose from: single-chip mode, memory expansion mode, and
microprocessor mode. Table 4.1 shows the features of these processor modes.
(2) Setting Processor Modes
Processor mode is set by using the CNVSS1 pin and the PM01 to PM00 bits in the PM0 register.
Table 4.2 shows the processor mode after hardware reset. Table 4.3 shows the PM01 to PM00 bit set
values and processor modes.
Table 4.2. Processor Mode After Hardware Reset
Table 4.1. Features of Processor Modes
Processor modes
Access space
Pins which are assigned I/O ports
Single-chip mode
SFR, internal RAM, internal ROM,
OSDRAM, OSDROM
All pins are I/O ports or peripheral
function I/O pins
Memory expansion mode
SFR, internal RAM, internal ROM,
external area (Note),
OSDRAM, OSDROM
Some pins serve as bus control pins (Note)
Microprocessor mode
SFR, internal RAM, external area (Note),
OSDRAM, OSDROM
Some pins serve as bus control pins (Note)
Note : Refer to “Bus”.
CNVSS1 pin input level
Processor mode
VSS
Single-chip mode
VCC1 (Note 1, Note 2)
Microprocessor mode
Note 1: If the microcomputer is reset in hardware by applying VCC1 to the CNVSS1 pin (hardware reset 1
or hardware reset 2), the internal ROM cannot be accessed regardless of PM01 to PM00 bits.
Note 2: The multiplexed bus cannot be assigned to the entire CS space.
Table 4.3. PM01 to PM00 Bits Set Values and Processor Modes
PM01 to PM00 bits
Processor modes
Single-chip mode
Memory expansion mode
Must not be set
002
012
102
Microprocessor mode
112
Rewriting the PM01 to PM00 bits places the microcomputer in the corresponding processor mode regard-
less of whether the input level on the CNVSS1 pin is “H” or “L”. Note, however, that the PM01 to PM00 bits
cannot be rewritten to “012” (memory expansion mode) or “112” (microprocessor mode) at the same time
the PM07 to PM02 bits are rewritten. Note also that these bits cannot be rewritten to enter microprocessor
mode in the internal ROM, nor can they be rewritten to exit microprocessor mode in areas overlapping the
internal ROM.
If the microcomputer is reset in hardware by applying VCC1 to the CNVSS1 pin (hardware reset 1 or
hardware reset 2), the internal ROM cannot be accessed regardless of PM01 to PM00 bits.
Figures 4.1 and 4.2 show the registers associated with processor modes. Figure 4.3 show the memory
map in single chip mode.
相关PDF资料
PDF描述
M30L40C-E3/4W 15 A, 40 V, SILICON, RECTIFIER DIODE, TO-220AB
M31022AGLJFREQ VCXO, CLOCK, 150 MHz - 1400 MHz, LVDS OUTPUT
M31002AMPJFREQ VCXO, CLOCK, 150 MHz - 1400 MHz, PECL OUTPUT
M31022BGLNFREQ VCXO, CLOCK, 150 MHz - 1400 MHz, LVDS OUTPUT
M31026ASLJFREQ VCXO, CLOCK, 150 MHz - 1400 MHz, LVDS OUTPUT
相关代理商/技术参数
参数描述
M3-076 制造商:Southco 功能描述:
M3077 制造商:Tamura Corporation of America 功能描述:
M30800FCFP 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M30800FCFP#U3 功能描述:MCU 3/5V 128K I-TEMP PB-FREE 100 RoHS:是 类别:集成电路 (IC) >> 嵌入式 - 微控制器, 系列:M16C™ M16C/80 标准包装:160 系列:S08 核心处理器:S08 芯体尺寸:8-位 速度:40MHz 连通性:I²C,LIN,SCI,SPI 外围设备:LCD,LVD,POR,PWM,WDT 输入/输出数:53 程序存储器容量:32KB(32K x 8) 程序存储器类型:闪存 EEPROM 大小:- RAM 容量:1.9K x 8 电压 - 电源 (Vcc/Vdd):2.7 V ~ 5.5 V 数据转换器:A/D 12x12b 振荡器型:内部 工作温度:-40°C ~ 105°C 封装/外壳:64-LQFP 包装:托盘
M30800FCGP 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER