- 您现在的位置：买卖IC网 > PDF目录80583 > M38D59GF-XXXFP 8-BIT, MROM, 6.25 MHz, MICROCONTROLLER, PQFP80 PDF资料下载
参数资料
| 型号： | M38D59GF-XXXFP |
| 元件分类： | 微控制器/微处理器 |
| 英文描述： | 8-BIT, MROM, 6.25 MHz, MICROCONTROLLER, PQFP80 |
| 封装： | 14 X 20 MM, 0.80 MM PITCH, PLASTIC, QFP-80 |
| 文件页数： | 90/142页 |
| 文件大小： | 2004K |
| 代理商： | M38D59GF-XXXFP |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页第69页第70页第71页第72页第73页第74页第75页第76页第77页第78页第79页第80页第81页第82页第83页第84页第85页第86页第87页第88页第89页当前第90页第91页第92页第93页第94页第95页第96页第97页第98页第99页第100页第101页第102页第103页第104页第105页第106页第107页第108页第109页第110页第111页第112页第113页第114页第115页第116页第117页第118页第119页第120页第121页第122页第123页第124页第125页第126页第127页第128页第129页第130页第131页第132页第133页第134页第135页第136页第137页第138页第139页第140页第141页第142页
Rev.3.04
May 20, 2008
REJ03B0158-0304
38D5 Group
Fig. 42 Structure of AD control register
ADKEY function
The ADKEY function is used to judge the analog input voltage
input from the ADKEY pin. When the A/D converter starts
operating after VIL (0.7
× Vcc-0.5) or less is input, the event of
analog voltage input can be judged with the A/D conversion
interrupt.
This function can be used with the STP and WIT state.
As for the ADKEY function in 38D5 Group, the A/D conversion
of analog input voltage immediately after starting ADKEY
function is not performed.
Therefore, the A/D conversion result immediately after an
ADKEY function is undefined. Accordingly, when the A/D
conversion result of the analog input voltage input from the
ADKEY pin is required, start the A/D conversion by program
after the analog input pin corresponding to ADKEY is selected.
ADKEY Selection
When the ADKEY pin is used, set the ADKEY selection bit to
“1”. The ADKEY selection bit is “0”, just after the A/D
conversion is started.
ADKEY Enable
The ADKEY function is enabled by writing “1” to the ADKEY
enable bit. Surely, in order to enable ADKEY function, set “1” to
the ADKEY enable bit, after setting the ADKEY selection bit to
“1”.
When the ADKEY enable bit of the AD control register is “1”,
the analog input pin selection bits become invalid. Please do not
write “0” in the AD conversion completion bit by the program
during ADKEY enabled state.
[ADKEY Control Circuit]
In order to obtain a more exact conversion result, by the A/D
conversion with ADKEY, execute the following;
set the input to the ADKEY pin into a steep falling waveform,
stabilize the input voltage within 8 clock cycles (1
s at f(XIN)
= 8 MHz) after the input voltage is under VIL
The threshold voltage with an actual ADKEY pin is the voltage
between VIH-VIL.
In order not to make ADKEY operation perform superfluously in
a noise etc., in the state of the waiting for an input, set the voltage
of an ADKEY pin to VIH (0.9VCC) or more.
When the following operations are performed, the A/D
conversion operation cannot be guaranteed.
When the CPU mode register is operated during A/D
conversion operation,
When the AD conversion control register is operated during
A/D conversion operation,
When the STP or WIT instruction is executed during A/D
conversion operation.
AD control register
(ADCON: address 001516)
Analog input pin selection bits
b2 b1 b0
0 0 0 : P50/AN0
0 0 1 : P51/AN1
0 1 0 : P52/AN2
0 1 1 : P53/AN3
1 0 0 : P54/AN4
1 0 1 : P55/AN5
1 1 0 : P56/AN6
1 1 1 : P57/AN7
AD conversion completion bit
0 : Conversion in progress
1 : Conversion completed
AD conversion clock selection bit
0 :
φSOURCE/2
1 :
φSOURCE/8
ADKEY enable bit
0 : Disabled
1 : Enabled
10-bit or 8-bit conversion switch bit
0 : 10-bit AD
1 : 8-bit AD
ADKEY selection bit
0 : Invalid
1 : Valid
b7
b0
*VREF input switch bit
0: ON only during A/D conversion
1: ON
Note : The bit 5 to bit 1 of address 001616 become “0” at reading.
Also, bit 0 is undefined at reading.
(low-order)
*
b1 b0
b7
b0
AD conversion register
high-order
(Address 001716)
b7
b2
b3
b6 b5 b4
b9 b8
(high-order)
b7
b0
At 10bitAD
(Read address 001716 before 001616)
b5
b0
b1
b4 b3 b2
b7 b6
b7
b0
Notes 1:
φSOURCE indicates the followings:
XIN input in the frequency/2, 4, or 8 mode
On-chip oscillator divided by 4 in the low-speed and the on-chip
oscillator mode
2: When the ADKEY enable bit is “1”, the analog input pin selection
bits are invalid.
Do not execute the A/D conversion by program while the ADKEY is
enabled.
Bit 0 to bit 2 of ADCON are not changed even when ADKEY is
enabled.
AD conversion register
low-order
(Address 001616)
At 8bitAD
(Read only address 001716)
(Address 001716)
(2)
(1)
相关PDF资料 |
PDF描述 |
|---|---|
| MC6805S3P | 8-BIT, MROM, MICROCONTROLLER, PDIP28 |
| MC908QT1AVDWE | 8-BIT, FLASH, 8 MHz, MICROCONTROLLER, PDSO8 |
| MC908QY4AVDT | 8-BIT, FLASH, 8 MHz, MICROCONTROLLER, PDSO16 |
| MC9S08AW16CFUE | 8-BIT, FLASH, 40 MHz, MICROCONTROLLER, PQFP64 |
| M902-01-156.2500LF | 156.25 MHz, OTHER CLOCK GENERATOR, CQCC36 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| M38D59T-RLFS | 功能描述:BOARD EMULATOR FOR 38D5 GROUP RoHS:否 类别:编程器，开发系统 >> 内电路编程器、仿真器以及调试器 系列:- 产品变化通告:Development Systems Discontinuation 19/Jul/2010 标准包装:1 系列:* 类型:* 适用于相关产品:* 所含物品:* |
| M38DC-15 | 制造商:M/A-COM Technology Solutions 功能描述:MIXER(SPEC UX1015) - Bulk |
| M38K00F1-16FP | 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER |
| M38K00F1-16HP | 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER |
| M38K00F1-32FP | 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER |
发布紧急采购，3分钟左右您将得到回复。