- 您现在的位置：买卖IC网 > PDF目录18820 > MAX11008BETM+ (Maxim Integrated)IC CTLR LDMOS BIAS DUAL 48TQFN PDF资料下载
参数资料
| 型号： | MAX11008BETM+ |
| 厂商： | Maxim Integrated |
| 文件页数： | 26/67页 |
| 文件大小： | 0K |
| 描述： | IC CTLR LDMOS BIAS DUAL 48TQFN |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 43 |
| 功能： | 偏压控制器 |
| RF 型： | 手机 |
| 次要属性： | 片上 4Kb EEPROM |
| 封装/外壳： | 48-WFQFN 裸露焊盘 |
| 包装： | 托盘 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页当前第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页
Dual RF LDMOS Bias Controller with
Nonvolatile Memory
complete the ADC powers down, BUSY is pulled low,
and the results for all of the selected channels are
available in the FIFO.
The duration of the BUSY pulse is additive, depending
on the channel conversion sequence selected. The
BUSY pulse is set typically for 72μs by temperature
conversions; 52μs by PGAOUT conversions, and 7μs
by ADCIN conversions.
Clock Mode 01
In clock mode 01, power-up, acquisition, conversion,
and power-down are all initiated through a single pulse
on CNVST and performed automatically using the inter-
nal oscillator. Initiate a scan by writing to the ADC con-
version register and setting CNVST low for at least
20ns. The ADC sets the BUSY output high, powers up,
and scans all requested channels storing the results in
the FIFO if the ADCMON bit has been set. After the
scan is complete, the ADC powers down, BUSY is
pulled low, and the results for all of the selected chan-
nels are available in the FIFO. The BUSY pulse behav-
ior is identical to that of clock mode 00.
Externally Timed
Acquisitions and Conversions
Clock Mode 10
Clock mode 10 is reserved. Do not use this clock
mode.
Clock Mode 11
In clock mode 11, set the FBGON bit. Conversions are
initiated one at a time through CNVST and performed
using the internal oscillator. In this mode, the acquisition
time is controlled by the time CNVST is low. CNVST is
resynchronized by the internal oscillator, resulting in a
one-clock cycle (typically 320ns) uncertainty in the exact
sampling instant. Different timing parameters apply
depending if the conversion is temperature, from ADCIN,
or from PGAOUT (as specified in the Clock Mode 00
section). Figure 15 shows a conversion time example.
Both internal and external temperature conversions are
internally timed. Pull CNVST low for a minimum of 20ns
(t CNV11 ) to trigger a temperature conversion. The BUSY
output goes high and the temperature conversion result
is available in the FIFO (if the ADCMON bit is set) 72μs
(typ) after BUSY goes low again.
INTERNAL TEMPERATURE READING, PGA1 OUTPUT, AND ADCIN1 CONVERSION TIMING IN CLOCK MODE 11
CNVST
BUSY
t CNV = 20ns (typ)
t ACQ = 30 μ s (typ)
t ACQ = 1.5 μ s (typ)
INTERNAL
OPERATIONS
TEMPERATURE
CONVERSION
70 μ s (typ)
IDLE MODE,
REF AND
TEMP
SENSOR
POWERED
PGA 1
ACQUISITION
PGA 1
CONVERSION
22 μ s (typ)
IDLE MODE,
REF AND
TEMP
SENSOR
POWERED
END OF
SCAN
WRITE TO ADC
CONVERT REGISTER TO
SET UP ADC SCAN
FBGON = 1,
ADCMON = 1
TEMPERATURE
CONVERSION RESULT
AVAILABLE IN FIFO
PGA 1 OUTPUT
CONVERSION
RESULT AVAILABLE
IN FIFO
ADCIN 1
CONVERSION
RESULT AVAILABLE
IN FIFO
Figure 15. ADC Clock Mode 11 Example
26
______________________________________________________________________________________
相关PDF资料 |
PDF描述 |
|---|---|
| MCD310-16IO1 | MOD THYRISTOR/DIODE 1600V Y2-DCB |
| AH173-WL-7-B | IC HALL SENSOR LATCH 25MA SC59-3 |
| ACH3218-151-TD01 | FILTER 3-TERM 240MHZ 1.5A SMD |
| ND431425 | SCR MOD ISO DUAL 1400V 250A |
| AH175-WL-7-B | IC HALL SENSOR LATCH 25MA SC59-3 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX11008BETM+ | 功能描述:射频放大器 Dual RF LDMOS Bias Controller w/NV Mem RoHS:否 制造商:Skyworks Solutions, Inc. 类型:Low Noise Amplifier 工作频率:2.3 GHz to 2.8 GHz P1dB:18.5 dBm 输出截获点:37.5 dBm 功率增益类型:32 dB 噪声系数:0.85 dB 工作电源电压:5 V 电源电流:125 mA 测试频率:2.6 GHz 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-16 封装:Reel |
| MAX11008BETM+T | 功能描述:射频放大器 Dual RF LDMOS Bias Controller w/NV Mem RoHS:否 制造商:Skyworks Solutions, Inc. 类型:Low Noise Amplifier 工作频率:2.3 GHz to 2.8 GHz P1dB:18.5 dBm 输出截获点:37.5 dBm 功率增益类型:32 dB 噪声系数:0.85 dB 工作电源电压:5 V 电源电流:125 mA 测试频率:2.6 GHz 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-16 封装:Reel |
| MAX11008EVC16 | 功能描述:放大器 IC 开发工具 MAX11008 Eval Kit RoHS:否 制造商:International Rectifier 产品:Demonstration Boards 类型:Power Amplifiers 工具用于评估:IR4302 工作电源电压:13 V to 23 V |
| MAX11008EVKIT+ | 功能描述:放大器 IC 开发工具 MAX11008 Eval Kit RoHS:否 制造商:International Rectifier 产品:Demonstration Boards 类型:Power Amplifiers 工具用于评估:IR4302 工作电源电压:13 V to 23 V |
| MAX1100CWG | 制造商:Rochester Electronics LLC 功能描述: 制造商:Maxim Integrated Products 功能描述: |
发布紧急采购，3分钟左右您将得到回复。