参数资料
型号: MCHC705JJ7CPE
厂商: Freescale Semiconductor
文件页数: 101/164页
文件大小: 0K
描述: IC MCU 8BIT 224 BYTES RAM 20PDIP
标准包装: 18
系列: HC05
核心处理器: HC05
芯体尺寸: 8-位
速度: 2.1MHz
连通性: SIO
外围设备: POR,温度传感器,WDT
输入/输出数: 14
程序存储器容量: 6KB(6K x 8)
程序存储器类型: OTP
RAM 容量: 224 x 8
电压 - 电源 (Vcc/Vdd): 2.7 V ~ 5.5 V
数据转换器: A/D 4x12b
振荡器型: 内部
工作温度: -40°C ~ 85°C
封装/外壳: 20-DIP(0.300",7.62mm)
包装: 管件
Analog Interrupts
MC68HC705JJ7 MC68HC705JP7 Advance Information Data Sheet, Rev. 4.1
Freescale Semiconductor
41
4.9 Analog Interrupts
The analog subsystem can generate the following interrupts:
Voltage on positive input of comparator 1 is greater than the voltage on the negative input of
comparator 1.
Voltage on positive input of comparator 2 is greater than the voltage on the negative input of
comparator 2.
Trigger of the input capture interrupt from the programmable timer as described in 4.7.1 Input
Setting the I bit in the condition code register disables analog subsystem interrupts. The controls for these
interrupts are in the analog subsystem control register (ACR) located at $001D, and the status bits are in
the analog subsystem status register (ASR) located at $001E.
4.9.1 Comparator Input Match Interrupt
A comparator input match interrupt occurs if either compare flag bit (CPF1 or CPF2) in the ASR becomes
set while the comparator interrupt enable bit (CPIE) in the ACR is also set. The CPF1 and CPF2 flag bits
can be reset by writing a one to the corresponding CPFR1 or CPFR2 bits in the ASR. Reset clears these
bits.
4.9.2 Input Capture Interrupt
The analog subsystem can also generate an input capture interrupt through the 16-bit programmable
timer. The input capture can be triggered when there is a match in the input conditions for the voltage
comparator 2. If comparator 2 sets the CP2F flag bit in the ASR and the input capture enable (ICEN) in
the ACR is set, then an input capture will be performed by the programmable timer. If the ICIE enable bit
in the TCR is also set, then an input compare interrupt will occur. Reset clears these bits.
NOTE
For the analog subsystem to generate an interrupt using the input capture
function of the programmable timer, the ICEN enable bit in the ACR, and
the ICIE and IEDG bits in the TCR must all be set.
相关PDF资料
PDF描述
VI-B4L-IX-B1 CONVERTER MOD DC/DC 28V 75W
VI-B4K-IW-B1 CONVERTER MOD DC/DC 40V 100W
VI-B4J-IX-B1 CONVERTER MOD DC/DC 36V 75W
VI-B4J-IW-B1 CONVERTER MOD DC/DC 36V 100W
VI-B43-IX-B1 CONVERTER MOD DC/DC 24V 75W
相关代理商/技术参数
参数描述
MCHC705JP7CDWE 功能描述:8位微控制器 -MCU 8B MCU 224 BYTES RAM RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
MCHC705KJ1CDWE 功能描述:8位微控制器 -MCU 8 BIT MCU 64 BYTES RAM RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
MCHC705KJ1CDWE 制造商:Freescale Semiconductor 功能描述:8-Bit Microcontroller IC
MCHC705KJ1CPE 功能描述:IC MCU 8BIT 64 BYTES RAM 16PDIP RoHS:是 类别:集成电路 (IC) >> 嵌入式 - 微控制器, 系列:HC05 标准包装:1 系列:87C 核心处理器:MCS 51 芯体尺寸:8-位 速度:16MHz 连通性:SIO 外围设备:- 输入/输出数:32 程序存储器容量:8KB(8K x 8) 程序存储器类型:OTP EEPROM 大小:- RAM 容量:256 x 8 电压 - 电源 (Vcc/Vdd):4 V ~ 6 V 数据转换器:- 振荡器型:外部 工作温度:0°C ~ 70°C 封装/外壳:44-DIP 包装:管件 其它名称:864285
MCHC711KS2CFNE3 功能描述:8位微控制器 -MCU 32K EPROM - SLO MODE RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT