- 您现在的位置：买卖IC网 > PDF目录67996 > ML60851CTB (LAPIS SEMICONDUCTOR CO LTD) UNIVERSAL SERIAL BUS CONTROLLER, PQFP44 PDF资料下载
参数资料
| 型号： | ML60851CTB |
| 厂商： | LAPIS SEMICONDUCTOR CO LTD |
| 元件分类： | 总线控制器 |
| 英文描述： | UNIVERSAL SERIAL BUS CONTROLLER, PQFP44 |
| 封装： | 10 X 10 MM, 0.80 MM PITCH, PLASTIC, TQFP-44 |
| 文件页数： | 5/68页 |
| 文件大小： | 442K |
| 代理商： | ML60851CTB |
第1页第2页第3页第4页当前第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页
PEDL60851C-02
1Semiconductor
ML60851C
12/67
Configuration state:
When the local MPU asserts the configuration bits EP1CON, EP2CON, or EP3CON in response to a
SET_CONFIGURATION request from the host computer when this IC is in the address state, by writing a
“1” in this bit also, if necessary, at that time, it is possible to give an indication that the ML60851C has
entered the configuration state. Since the content of this bit does not affect the operation of the ML60851C,
there is no need to write in this bit if it will not be read out.
Remarks:
When all these three states are “1”, it means that this IC is normally operating. However, since these bits do
not affect the operation of the ML60851C, there is no need to write in these bits if they will not be read out.
Suspend state:
When the idle condition continues for more than 3ms in the USB bus, the ML60851C automatically asserts
this bit thereby indicating that it is going into the suspend state. At the same time, bit D6 of the interrupt
status register INTSTAT is asserted and the
INTR pin is asserted. With this, the local MCU can suppress
the current consumption.
This bit is deasserted when the EOP of any type of packet is received.
Remote wake-up:
The ML60851C is in the suspend state, the remote wake-up function is activated when the local MCU
asserts this bit. When this bit is written while 5ms have not yet elapsed in the idle condition, the remote
wake-up signal is output after waiting for the idle condition to continue for the full 5ms period. Further,
when this bit is written after the idle condition has persisted for 5ms or more, the remote wake-up signal is
output immediately after this bit is written. This bit is deasserted automatically when the suspend state is
released by receiving the resume instruction over the USB bus.
USB bus reset status clear:
When the ML60851C is in the USB bus reset interrupt state (bit D5 of the interrupt status register, that is the
USB bus reset interrupt status bit is “1” and the
INTR pin is asserted), it is possible to clear the interrupt
status by writing a “1” in this bit. (This makes the USB bus reset interrupt status bit “0” and deassertes
INTR.) Although this bit can be read out, the read out value will always be “0”.
相关PDF资料 |
PDF描述 |
|---|---|
| ML60851CGA | UNIVERSAL SERIAL BUS CONTROLLER, PQFP44 |
| ML60851DGA | UNIVERSAL SERIAL BUS CONTROLLER, PQFP44 |
| ML60851DTB | UNIVERSAL SERIAL BUS CONTROLLER, PQFP44 |
| ML610Q340-XXXMB | 8-BIT, FLASH, 4.2 MHz, RISC MICROCONTROLLER, PDSO30 |
| ML610340-XXXMB | 8-BIT, MROM, 4.2 MHz, RISC MICROCONTROLLER, PDSO30 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ML60851D | 制造商:OKI 制造商全称:OKI electronic componets 功能描述:USB Device Controller |
| ML60851E | 制造商:OKI 制造商全称:OKI electronic componets 功能描述:USB Device Controller |
| ML60851EGA | 制造商:OKI 制造商全称:OKI electronic componets 功能描述:USB Device Controller |
| ML60851ETB | 制造商:OKI 制造商全称:OKI electronic componets 功能描述:USB Device Controller |
| ML60852 | 制造商:OKI 制造商全称:OKI electronic componets 功能描述:USB Device Controller |
发布紧急采购，3分钟左右您将得到回复。