参数资料
型号: MPC5606SCMG6
厂商: FREESCALE SEMICONDUCTOR INC
元件分类: 微控制器/微处理器
英文描述: 32-BIT, FLASH, 64 MHz, MICROCONTROLLER, PBGA208
封装: 17 X 17 MM, 1 MM PITCH, MAPBGA-208
文件页数: 102/134页
文件大小: 890K
代理商: MPC5606SCMG6
Overview
MPC560xS Microcontroller Data Sheet, Rev. 5
Preliminary—Subject to Change Without Notice
Freescale Semiconductor
7
It is possible to enable the internal 16 MHz or 128 kHz RC oscillator, the external 4–16 MHz oscillator, or the external
32 KHz oscillator.
It is possible to keep the LCD module active.
The device can be awakened from STANDBY mode via from any of up to 19 I/O pins, a reset or from a periodic wake-up using
a low power oscillator.
STOP mode maintains power to the entire device allowing the retention of all on-chip registers and memory, and providing a
faster recovery low power mode than the lowest STANDBY mode. There is no need to reconfigure the device before executing
code. The clocks to the core and peripherals are halted and can be optionally stopped to the oscillator or PLL at the expense of
a slower start-up time.
STOP is entered from RUN mode only. Wake-up from STOP mode is triggered by an external event or by the internal periodic
wake-up, if enabled.
RUN modes are the main operating mode where the entire device can be powered and clocked and from which most processing
activity is done. Four dynamic RUN modes are supported—RUN0 - RUN3. The ability to configure and select different RUN
modes enables different clocks and power configurations to be supported with respect to each other and to allow switching
between different operating conditions. The necessary peripherals, clock sources, clock speed and system clock prescalers can
be independently configured for each of the four RUN modes of the device.
HALT mode is a reduced activity, low power mode intended for moderate periods of lower processing activity. In this mode the
core system clocks are stopped but user-selected peripheral tasks can continue to run. It can be configured to provide more
efficient power management features (switch-off PLL, flash memory, main regulator, etc.) at the cost of longer wake up latency.
The system returns to RUN mode as soon as an event or interrupt is pending.
Because
of
an
order
from
the
United
States
International
Trade
Commission,
BGA-packaged
product
lines
and
part
numbers
indicated
here
currently
are
not
available
from
Freescale
for
import
or
sale
in
the
United
States
prior
to
September
2010:
MPC5606S
products
in
208
MAPBGA
packages
相关PDF资料
PDF描述
MPC602AFUXXEX RISC PROCESSOR, PQFP144
MPC602AFUXXCX RISC PROCESSOR, PQFP144
MPC603PRX166LX 32-BIT, 166 MHz, RISC PROCESSOR, CBGA255
MPC603PRX180LX 32-BIT, 180 MHz, RISC PROCESSOR, CBGA255
MPC603PFE166LX 32-BIT, 166 MHz, RISC PROCESSOR, CQFP240
相关代理商/技术参数
参数描述
MPC5606S-DEMO-V2 功能描述:开发板和工具包 - 其他处理器 EVB MPC5606S RoHS:否 制造商:Freescale Semiconductor 产品:Development Systems 工具用于评估:P3041 核心:e500mc 接口类型:I2C, SPI, USB 工作电源电压:
MPC5607B 制造商:Freescale Semiconductor 功能描述:
MPC5607B_13 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:MicrocontrollerData Sheet
MPC5607BECLLR 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:Microcontroller
MPC5607BECLQR 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:Microcontroller