参数资料
型号: MX10EXAUI
厂商: MACRONIX INTERNATIONAL CO LTD
元件分类: 微控制器/微处理器
英文描述: 16-BIT, FLASH, 30 MHz, MICROCONTROLLER, PQFP44
封装: 10 X 10 MM, 1.40 MM HEIGHT, PLASTIC, MS-026, LQFP-44
文件页数: 6/55页
文件大小: 476K
代理商: MX10EXAUI
14
P/N:PM0625 Specifications subject to change without notice, contact your sales representatives for the most update information. REV. 1.0, JUL. 01, 2005
MX10EXA
In-System Programming (ISP)
In-System Programming (ISP) is performed without re-
moving the microcontroller from the system. The In-Sys-
tem Programming (ISP) facility consists of a series of
internal hardware resources coupled with internal firm-
ware to facilitate remote programming of the XA through
the serial port.
The In-System Programming (ISP) facility has made in-
circuit programming in an embedded application possible
with a minimum of additional expense in components
and circuit board area.
The ISP function uses five pins: TxD, RxD, V
SS, and VPP
(see Figure 4). Only a small connector needs to be avail-
able to interface your application to an external circuit in
order to use this feature. The V
PP supply should be ad-
equately decoupled and V
PP not allowed to exceed data
sheet limits.
Using In-System Programming (ISP)
ISP mode is entered by holding PSEN low, asserting,
un-asserting RESET, then releasing PSEN. When ISP
mode is entered, the default loader first disables the
watchdog timer to prevent a watchdog reset from occur-
ring during programming.
The ISP feature allows for a wide range of baud rates to
be used in the application, independent of the oscillator
frequency. It is also adaptable to a wide range of oscilla-
tor frequencies. This is accomplished by measuring the
bit-time of a single bit in a received character. This infor-
mation is then used to program the baud rate in terms of
timer counts based on the oscillator frequency. The ISP
feature requires that an initial character (a lowercase f)
be sent to the XA to establish the baud rate. The ISP
firmware provides auto-echo of received characters.
Once baud rate initialization has been performed, the
ISP firmware will only accept specific Intel Hex-type
records. Intel Hex records consist of ASCII characters
used to represent hexadecimal values and are summa-
rized below:
:NNAAAARRDD..DDCC<crlf>
In the Intel Hex record, the “NN” represents the number
of data bytes in the record. The XA will accept up to 16
(10H) data bytes. The "AAAA"” string represents the ad-
dress of the first byte in the record. If there are zero
bytes in the record, this field is often set to 0000. The
"RR" string indicates the record type. A record type of
"00" is a data record. A record type of "01" indicates the
XTAL2
RST
VCC
VPP
+12V±5% or VDD SUPPLY
5V ±5%
TxD
RxD
VDD
FOR USE WITH WINISP
VxD
RxD
XTAL1
VSS
Figure 4. In-System Programming with a Minimum of Pins
VSS
2
3
5
FEMALE
DB - 9
RS - 232
TRANSCEIVER
MC145406, MAX232,
OR EQUIVALENT
相关PDF资料
PDF描述
MX836818 1 TIMER(S), REAL TIME CLOCK, PDIP24
MZ4617RL2 2.4 V, 0.5 W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE, DO-204AH
MZ4616RL2 2.2 V, 0.5 W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE, DO-204AH
MZ4625TA2 5.1 V, 0.5 W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE, DO-204AH
MZ4626RL 5.6 V, 0.5 W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE, DO-204AH
相关代理商/技术参数
参数描述
MX10F201FC 制造商:MCNIX 制造商全称:Macronix International 功能描述:High-Performance and Low Power Microcontroller designed for Use Many Applications
MX10FMAXDPC 制造商:MCNIX 制造商全称:Macronix International 功能描述:SINGLE-CHIP 8-BIT MICROCONTROLLER
MX10FMAXDQC 制造商:MCNIX 制造商全称:Macronix International 功能描述:SINGLE-CHIP 8-BIT MICROCONTROLLER
MX-10G 制造商:未知厂家 制造商全称:未知厂家 功能描述:MX
MX-10GC 制造商:未知厂家 制造商全称:未知厂家 功能描述:MX