- 您现在的位置：买卖IC网 > PDF目录11825 > SC16C2552BIA44,512 (NXP Semiconductors)IC UART DUAL SOT187-2 PDF资料下载
参数资料
| 型号： | SC16C2552BIA44,512 |
| 厂商： | NXP Semiconductors |
| 文件页数： | 11/37页 |
| 文件大小： | 0K |
| 描述： | IC UART DUAL SOT187-2 |
| 标准包装： | 26 |
| 特点： | 2 通道 |
| 通道数： | 2，DUART |
| FIFO's： | 16 字节 |
| 电源电压： | 2.5V，3.3V，5V |
| 带IrDA 编码器/解码器： | 是 |
| 带故障启动位检测功能： | 是 |
| 带调制解调器控制功能： | 是 |
| 带CMOS： | 是 |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 44-LCC（J 形引线） |
| 供应商设备封装： | 44-PLCC |
| 包装： | 管件 |
| 其它名称： | 935274408512 SC16C2552BIA44 SC16C2552BIA44-ND |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页当前第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页
SC16C2552B_3
NXP B.V. 2009. All rights reserved.
Product data sheet
Rev. 03 — 12 February 2009
19 of 38
NXP Semiconductors
SC16C2552B
5 V, 3.3 V and 2.5 V dual UART, 5 Mbit/s (max.), with 16-byte FIFOs
7.7 Line Status Register (LSR)
This register provides the status of data transfers between the SC16C2552B and
the CPU.
Table 17.
Line Status Register bits description
Bit
Symbol
Description
7
LSR[7]
FIFO data error.
logic 0 = no error (normal default condition)
logic 1 = at least one parity error, framing error or break indication is in the
current FIFO data. This bit is cleared when RHR register is read.
6
LSR[6]
THR and TSR empty. This bit is the Transmit Empty indicator. This bit is set to a
logic 1 whenever the Transmit Holding Register and the Transmit Shift Register
are both empty. It is reset to logic 0 whenever either the THR or TSR contains a
data character. In the FIFO mode, this bit is set to logic 1 whenever the Transmit
FIFO and Transmit Shift Register are both empty.
5
LSR[5]
THR empty. This bit is the Transmit Holding Register Empty indicator. This bit
indicates that the UART is ready to accept a new character for transmission. In
addition, this bit causes the UART to issue an interrupt to CPU when the THR
interrupt enable is set. The THR bit is set to a logic 1 when a character is
transferred from the Transmit Holding Register into the Transmit Shift Register.
The bit is reset to a logic 0 concurrently with the loading of the Transmit Holding
Register by the CPU. In the FIFO mode, this bit is set when the transmit FIFO is
empty; it is cleared when at least 1 byte is written to the transmit FIFO.
4
LSR[4]
Break interrupt.
logic 0 = no break condition (normal default condition)
logic 1 = the receiver received a break signal (RX was a logic 0 for one
character frame time). In the FIFO mode, only one break character is loaded
into the FIFO.
3
LSR[3]
Framing error.
logic 0 = no framing error (normal default condition)
logic 1 = framing error. The receive character did not have a valid stop bit(s). In
the FIFO mode, this error is associated with the character at the top of the
FIFO.
2
LSR[2]
Parity error.
logic 0 = no parity error (normal default condition
logic 1 = parity error. The receive character does not have correct parity
information and is suspect. In the FIFO mode, this error is associated with the
character at the top of the FIFO.
1
LSR[1]
Overrun error.
logic 0 = no overrun error (normal default condition)
logic 1 = overrun error. A data overrun error occurred in the Receive Shift
Register. This happens when additional data arrives while the FIFO is full. In
this case, the previous data in the shift register is overwritten. Note that under
this condition, the data byte in the Receive Shift Register is not transferred into
the FIFO, therefore the data in the FIFO is not corrupted by the error.
0
LSR[0]
Receive data ready.
logic 0 = no data in Receive Holding Register or FIFO (normal default
condition)
logic 1 = data has been received and is saved in the Receive Holding Register
or FIFO
相关PDF资料 |
PDF描述 |
|---|---|
| SC16C652BIBS,157 | IC UART DUAL W/FIFO 32HVQFN |
| VI-23R-IY | CONVERTER MOD DC/DC 7.5V 50W |
| SC16C852VIET,157 | IC UART DUAL W/FIFO 36TFBGA |
| MS3102R32-8S | CONN RCPT 30POS BOX MNT W/SCKT |
| MS3102E32-8S | CONN RCPT 30POS BOX MNT W/SCKT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| SC16C2552BIA44-T | 功能描述:UART 接口集成电路 16CB 2.5V-5V 2CH UART 16B FIFO RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel |
| SC16C2552CIA44,512 | 制造商:NXP Semiconductors 功能描述: 制造商:NXP Semiconductors 功能描述:SC16C2552CIA44/PLCC44/TUBEDP// - Rail/Tube |
| SC16C2552CIA44,518 | 制造商:NXP Semiconductors 功能描述:SC16C2552CIA44/PLCC44/REEL13DP// - Tape and Reel |
| SC16C2552CIA44,529 | 制造商:NXP Semiconductors 功能描述:SC16C2552CIA44/PLCC44/TUBESMDP// - Rail/Tube |
| SC16C2552IA44 | 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:Dual UART with 16-byte transmit and receive FIFOs |
发布紧急采购，3分钟左右您将得到回复。