参数资料
型号: SC16C2552BIA44,512
厂商: NXP Semiconductors
文件页数: 26/37页
文件大小: 0K
描述: IC UART DUAL SOT187-2
标准包装: 26
特点: 2 通道
通道数: 2,DUART
FIFO's: 16 字节
电源电压: 2.5V,3.3V,5V
带IrDA 编码器/解码器:
带故障启动位检测功能:
带调制解调器控制功能:
带CMOS:
安装类型: 表面贴装
封装/外壳: 44-LCC(J 形引线)
供应商设备封装: 44-PLCC
包装: 管件
其它名称: 935274408512
SC16C2552BIA44
SC16C2552BIA44-ND
SC16C2552B_3
NXP B.V. 2009. All rights reserved.
Product data sheet
Rev. 03 — 12 February 2009
32 of 38
NXP Semiconductors
SC16C2552B
5 V, 3.3 V and 2.5 V dual UART, 5 Mbit/s (max.), with 16-byte FIFOs
12. Soldering of SMD packages
This text provides a very brief insight into a complex technology. A more in-depth account
of soldering ICs can be found in Application Note
AN10365 “Surface mount reow
soldering description”.
12.1 Introduction to soldering
Soldering is one of the most common methods through which packages are attached to
Printed Circuit Boards (PCBs), to form electrical circuits. The soldered joint provides both
the mechanical and the electrical connection. There is no single soldering method that is
ideal for all IC packages. Wave soldering is often preferred when through-hole and
Surface Mount Devices (SMDs) are mixed on one printed wiring board; however, it is not
suitable for ne pitch SMDs. Reow soldering is ideal for the small pitches and high
densities that come with increased miniaturization.
12.2 Wave and reow soldering
Wave soldering is a joining technology in which the joints are made by solder coming from
a standing wave of liquid solder. The wave soldering process is suitable for the following:
Through-hole components
Leaded or leadless SMDs, which are glued to the surface of the printed circuit board
Not all SMDs can be wave soldered. Packages with solder balls, and some leadless
packages which have solder lands underneath the body, cannot be wave soldered. Also,
leaded SMDs with leads having a pitch smaller than ~0.6 mm cannot be wave soldered,
due to an increased probability of bridging.
The reow soldering process involves applying solder paste to a board, followed by
component placement and exposure to a temperature prole. Leaded packages,
packages with solder balls, and leadless packages are all reow solderable.
Key characteristics in both wave and reow soldering are:
Board specications, including the board nish, solder masks and vias
Package footprints, including solder thieves and orientation
The moisture sensitivity level of the packages
Package placement
Inspection and repair
Lead-free soldering versus SnPb soldering
12.3 Wave soldering
Key characteristics in wave soldering are:
Process issues, such as application of adhesive and ux, clinching of leads, board
transport, the solder wave parameters, and the time during which components are
exposed to the wave
Solder bath specications, including temperature and impurities
相关PDF资料
PDF描述
SC16C652BIBS,157 IC UART DUAL W/FIFO 32HVQFN
VI-23R-IY CONVERTER MOD DC/DC 7.5V 50W
SC16C852VIET,157 IC UART DUAL W/FIFO 36TFBGA
MS3102R32-8S CONN RCPT 30POS BOX MNT W/SCKT
MS3102E32-8S CONN RCPT 30POS BOX MNT W/SCKT
相关代理商/技术参数
参数描述
SC16C2552BIA44-T 功能描述:UART 接口集成电路 16CB 2.5V-5V 2CH UART 16B FIFO RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel
SC16C2552CIA44,512 制造商:NXP Semiconductors 功能描述: 制造商:NXP Semiconductors 功能描述:SC16C2552CIA44/PLCC44/TUBEDP// - Rail/Tube
SC16C2552CIA44,518 制造商:NXP Semiconductors 功能描述:SC16C2552CIA44/PLCC44/REEL13DP// - Tape and Reel
SC16C2552CIA44,529 制造商:NXP Semiconductors 功能描述:SC16C2552CIA44/PLCC44/TUBESMDP// - Rail/Tube
SC16C2552IA44 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:Dual UART with 16-byte transmit and receive FIFOs