收藏本站
参数资料
型号： SC9RS08KA1J3CDB
厂商： FREESCALE SEMICONDUCTOR INC
元件分类： 微控制器/微处理器
英文描述： 8-BIT, FLASH, 20 MHz, MICROCONTROLLER, PDSO6
封装： 3 X 3 MM, 0.80 MM HEIGHT, ROHS COMPLIANT, DFN-6
文件页数： 51/134页
文件大小： 3114K
代理商： SC9RS08KA1J3CDB
Chapter 3 Modes of Operation
SC9RS08KA2 Series Data Sheet, Rev. 1
Freescale Semiconductor
23
Table 3-1 summarizes the behavior of the MCU in wait mode.
3.6
Stop Mode
Stop mode is entered upon execution of a STOP instruction when the STOPE bit in the system option
register is set. In stop mode, all internal clocks to the CPU and the modules are halted. If the STOPE bit is
not set when the CPU executes a STOP instruction, the MCU will not enter stop mode and an illegal
opcode reset is forced.
Table 3-2 summarizes the behavior of the MCU in stop mode.
Upon entering stop mode, all of the clocks in the MCU are halted. The ICS is turned off by default when
the IREFSTEN bit is cleared and the voltage regulator is put in standby. The states of all of the internal
registers and logic, as well as the RAM content, are maintained. The I/O pin states are held.
Exit from stop is done by asserting RESET, any asynchronous interrupt that has been enabled, or the
real-time interrupt. The asynchronous interrupts are the KBI pins, LVD interrupt, or the ACMP interrupt.
If stop is exited by asserting the RESET pin, the MCU will be reset and program execution starts at
location $3FFD. If exited by means of an asynchronous interrupt or real-time interrupt, the next instruction
after the location where the STOP instruction was executed will be executed accordingly. It is the
responsibility of the user program to probe for the corresponding interrupt source that woke the CPU.
A separate self-clocked source (
≈1 kHz) for the real-time interrupt allows a wakeup from stop mode with
no external components. When RTIS = 000, the real-time interrupt function and the 1-kHz source are
disabled. Power consumption is lower when the 1-kHz source is disabled, but in that case, the real-time
interrupt cannot wake the MCU from stop.
The trimmed 32-kHz clock in the ICS module can also be enabled for the real-time interrupt to allow a
wakeup from stop mode with no external components. The 32-kHz clock reference is enabled by setting
Table 3-1. Wait Mode Behavior
Mode
CPU
Digital
Peripherals
ICS
ACMP
Regulator
I/O Pins
RTI
Wait
Standby
Optionally on
On
Optionally
on
On
States held
Optionally on
Table 3-2. Stop Mode Behavior
Mode
CPU
Digital
Peripherals
ICS1
1 ICS requires IREFSTEN = 1 and LVDE and LVDSE must be set to allow operation in stop.
ACMP2
2 If bandgap reference is required, the LVDE and LVDSE bits in the SPMSC1 must both be set before entering
stop.
Regulator
I/O Pins
RTI3
3 If the 32-kHz trimmed clock in the ICS module is selected as the clock source for the RTI, LVDE and LVDSE bits
in the SPMSC1 must both be set before entering stop.
Stop
Standby
Optionally
on
Optionally
on
Standby
States held
Optionally on
相关PDF资料
PDF描述
SCA-6 0 MHz - 3000 MHz RF/MICROWAVE WIDE BAND LOW POWER AMPLIFIER
SCA1N3595US 0.125 A, 125 V, SILICON, SIGNAL DIODE
SCD0705T-6R8M-N 1 ELEMENT, 6.8 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR, SMD
SCD0705T-6R8L-N 1 ELEMENT, 6.8 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR, SMD
SCD0705T-6R8K-N 1 ELEMENT, 6.8 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR, SMD
相关代理商/技术参数
参数描述
SC9RS08KA1J3CPC 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:RS08 Microcontrollers
SC9RS08KA1J3CSC 制造商:Freescale Semiconductor 功能描述:8-BIT RS08 CISC 1KB FLASH 2.5V/3.3V/5V 8-PIN SOIC N RAIL - Rail/Tube 制造商:Freescale Semiconductor 功能描述:1K FLASH W/ ACMP 62 RAM
SC9RS08KA2 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:RS08 Microcontrollers
SC9RS08KA2J3CDB 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:RS08 Microcontrollers
SC9RS08KA2J3CPC 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:RS08 Microcontrollers
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*