- 您现在的位置：买卖IC网 > PDF目录300103 > W9425G6EB-6I (WINBOND ELECTRONICS CORP) 16M X 16 DDR DRAM, 0.7 ns, PBGA60 PDF资料下载
参数资料
| 型号： | W9425G6EB-6I |
| 厂商： | WINBOND ELECTRONICS CORP |
| 元件分类： | DRAM |
| 英文描述： | 16M X 16 DDR DRAM, 0.7 ns, PBGA60 |
| 封装： | 8 X 13 MM, ROHS COMPLIANT, TFBGA-60 |
| 文件页数： | 2/51页 |
| 文件大小： | 2017K |
| 代理商： | W9425G6EB-6I |
第1页当前第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页
W9425G6EB
Publication Release Date:Feb. 12, 2009
- 10 -
Revision A02
7.2 Command Function
7.2.1
Bank Activate Command
( RAS = "L", CAS = "H", WE = "H", BA0, BA1 = Bank, A0 to A12 = Row Address)
The Bank Activate command activates the bank designated by the BA (Bank address) signal. Row
addresses are latched on A0 to A12 when this command is issued and the cell data is read out of
the sense amplifiers. The maximum time that each bank can be held in the active state is specified
as tRAS (max). After this command is issued, Read or Write operation can be executed.
7.2.2
Bank Precharge Command
( RAS = "L", CAS = "H", WE = "L", BA0, BA1 = Bank, A10 = "L", A0 to A9, A11, A12 = Don’t
Care)
The Bank Precharge command percharges the bank designated by BA. The precharged bank is
switched from the active state to the idle state.
7.2.3
Precharge All Command
( RAS = "L", CAS = "H", WE = "L", BA0, BA1 = Don’t Care, A10 = "H", A0 to A9, A11, A12 =
Don’t Care)
The Precharge All command precharges all banks simultaneously. Then all banks are switched to
the idle state.
7.2.4
Write Command
( RAS = "H", CAS = "L", WE = "L", BA0, BA1 = Bank, A10 = "L", A0 to A8 = Column Address)
The write command performs a Write operation to the bank designated by BA. The write data are
latched at both edges of DQS. The length of the write data (Burst Length) and column access
sequence (Addressing Mode) must be in the Mode Register at power-up prior to the Write
operation.
7.2.5
Write with Auto-precharge Command
( RAS = "H", CAS = "L", WE = "L", BA0, BA1 = Bank, A10 = "H", A0 to A8 = Column Address)
The Write with Auto-precharge command performs the Precharge operation automatically after the
Write operation. This command must not be interrupted by any other commands.
7.2.6
Read Command
( RAS = "H", CAS = "L", WE = "H", BA0, BA1 = Bank, A10 = "L", A0 to A8 = Column Address)
The Read command performs a Read operation to the bank designated by BA. The read data are
synchronized with both edges of DQS. The length of read data (Burst Length), Addressing Mode
and CAS Latency (access time from CAS command in a clock cycle) must be programmed in the
Mode Register at power-up prior to the Read operation.
7.2.7
Read with Auto-precharge Command
( RAS = "H", CAS = ”L”, WE = ”H”, BA0, BA1 = Bank, A10 = ”H”, A0 to A8 = Column Address)
The Read with Auto-precharge command automatically performs the Precharge operation after the
Read operation.
相关PDF资料 |
PDF描述 |
|---|---|
| W965L6ABN80I | 2M X 16 PSEUDO STATIC RAM, 75 ns, PBGA48 |
| W9712G6JB-3 | 8M X 16 DDR DRAM, 0.45 ns, PBGA84 |
| W981616CH-5 | 1M X 16 SYNCHRONOUS DRAM, 5.5 ns, PDSO50 |
| W986408AH-10 | 8M X 8 SYNCHRONOUS DRAM, 8 ns, PDSO54 |
| W986408BH-8N | 8M X 8 SYNCHRONOUS DRAM, 6 ns, PDSO54 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| W9425G6EH | 制造商:WINBOND 制造商全称:Winbond 功能描述:4 M 】 4 BANKS 】 16 BITS DDR SDRAM |
| W9425G6EH_0812 | 制造商:WINBOND 制造商全称:Winbond 功能描述:4 M × 4 BANKS × 16 BITS DDR SDRAM |
| W9425G6EH-5 | 功能描述:IC DDR-400 SDRAM 256MB 66TSSOPII RoHS:是 类别:集成电路 (IC) >> 存储器 系列:- 标准包装:1,000 系列:- 格式 - 存储器:EEPROMs - 串行 存储器类型:EEPROM 存储容量:4K (512 x 8) 速度:400kHz 接口:I²C，2 线串口 电源电压:2.7 V ~ 5.5 V 工作温度:-40°C ~ 85°C 封装/外壳:8-SOIC（0.173"，4.40mm 宽） 供应商设备封装:8-MFP 包装:带卷 (TR) |
| W9425G6EH-5I | 制造商:Winbond Electronics Corp 功能描述: |
| W9425G6JB-5 | 制造商:Winbond Electronics Corp 功能描述:DRAM Chip DDR SDRAM 256M-Bit 16Mx16 2.5V 60-Pin TFBGA 制造商:Winbond Electronics 功能描述:IC MEMORY 制造商:Winbond Electronics Corp 功能描述:IC MEMORY 制造商:Winbond 功能描述:16MX16,256Mb DDRI DRAM ,200MHZ, BGA |
发布紧急采购，3分钟左右您将得到回复。