参数资料
型号: WBLXT975BHCA8
厂商: CORTINA SYSTEMS INC
元件分类: 网络接口
英文描述: DATACOM, ETHERNET TRANSCEIVER, PQFP160
封装: ROHS COMPLIANT, PLASTIC, MS-002DD-1, HQFP-160
文件页数: 30/76页
文件大小: 1004K
代理商: WBLXT975BHCA8
LXT974/LXT975 — Fast Ethernet 10/100 Quad Transceivers
36
Datasheet
2.5.6.2
Baseline Wander Correction
The LXT974/975 provides a baseline wander correction function which makes the device robust
under all network operating conditions. The MLT3 coding scheme used in 100BASE-TX is by
definition “unbalanced”. This means that the DC average value of the signal voltage can “wander”
significantly over short time intervals (tenths of seconds). This wander can cause receiver errors,
particularly in less robust designs, at long line lengths (100 meters). The exact characteristics of the
wander are completely data dependent.
The LXT974/975 baseline wander correction characteristics allow the LXT974/975 to recover
error-free data while receiving worst-case “killer” packets over a variety of cable distances.
2.5.6.3
Polarity Correction
The LXT974/975 automatically detects and corrects for the condition where the receive signal
(TPIP/N) is inverted. Reversed polarity is detected if eight inverted link pulses, or four inverted
end-of-frame (EOF) markers, are received consecutively. If link pulses or data are not received by
the maximum receive time-out period, the polarity state is reset to a non-inverted state.
2.5.7
Fiber PMD Sublayer
The LXT974/975 provides a PECL interface for connection to an external fiber-optic transceiver.
(The external transceiver provides the PMD function for fiber media.) The LXT974/975 uses an
NRZI format for the fiber interface. The fiber interface operates at 100 Mbps and does not support
10FL applications.
2.6
10 Mbps Operation
The LXT974/975 operates as a standard 10BASE-T transceiver. Data transmitted by the MAC as
4-bit nibbles is serialized, Manchester-encoded, and transmitted on the TPOP/N outputs. Received
data is decoded and de-serialized into 4-bit nibbles. The LXT974/975 supports all the standard 10
Mbps functions.
2.6.1
10BASE-T MII Operation
The MAC transmits data to the LXT974/975 via the MII interface. The LXT974/975 converts the
digital data from the MAC into an analog waveform that is transmitted to the network via the
copper interface. The LXT974/975 converts analog signals received from the network into a digital
format suitable for the MAC. The LXT974/975 sends the received data to the MAC via the MII.
2.6.2
10BASE-T Network Operations
During 10BASE-T operation, the LXT974/975 transmits and receives Manchester-encoded data
across the network link. When the MAC is not actively transmitting data, the LXT974/975 sends
out link pulses on the line.
In 10BASE-T mode, the polynomial scrambler/descrambler is inactive. Manchester-encoded
signals received from the network are decoded by the LXT974/975 and sent across the MII to the
MAC.
相关PDF资料
PDF描述
WBLXT974BHCA8 DATACOM, ETHERNET TRANSCEIVER, PQFP160
WBLXT974BHCA8 DATACOM, ETHERNET TRANSCEIVER, PQFP160
WBLXT9785EHC.C2V DATACOM, INTERFACE CIRCUIT, PQFP208
WBLXT9785EHC.D0-865110 DATACOM, INTERFACE CIRCUIT, PQFP208
WBLXT9785EHC.D0-865111 DATACOM, INTERFACE CIRCUIT, PQFP208
相关代理商/技术参数
参数描述
WBLXT9785EHC.D0865110 功能描述:IC TXRX 8PORT ETHERNET 208-HQFP RoHS:是 类别:集成电路 (IC) >> 接口 - 驱动器,接收器,收发器 系列:- 标准包装:1,000 系列:- 类型:收发器 驱动器/接收器数:2/2 规程:RS232 电源电压:3 V ~ 5.5 V 安装类型:表面贴装 封装/外壳:16-SOIC(0.295",7.50mm 宽) 供应商设备封装:16-SOIC 包装:带卷 (TR)
WBLXT9785EHC.D0-865110 制造商:Cortina Systems Inc 功能描述:PHY 8-CH 10Mbps/100Mbps 208-Pin PQFP
WBLXT9785EHC.D0-865111 制造商:Cortina Systems Inc 功能描述:PHY 8-CH 10Mbps/100Mbps 208-Pin PQFP
WBLXT9785HC.D0 功能描述:IC TXRX 8PORT ETHERNET 208-HQFP RoHS:是 类别:集成电路 (IC) >> 接口 - 驱动器,接收器,收发器 系列:- 标准包装:1,000 系列:- 类型:收发器 驱动器/接收器数:2/2 规程:RS232 电源电压:3 V ~ 5.5 V 安装类型:表面贴装 封装/外壳:16-SOIC(0.295",7.50mm 宽) 供应商设备封装:16-SOIC 包装:带卷 (TR)
WBLXT9785HC.D0-865112 功能描述:TXRX ETH OCT LP COMM 208-HQFP RoHS:是 类别:集成电路 (IC) >> 接口 - 驱动器,接收器,收发器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:50 系列:- 类型:收发器 驱动器/接收器数:1/1 规程:RS422,RS485 电源电压:4.75 V ~ 5.25 V 安装类型:通孔 封装/外壳:8-DIP(0.300",7.62mm) 供应商设备封装:8-PDIP 包装:管件 产品目录页面:1402 (CN2011-ZH PDF)