参数资料
| 型号： | X96012V14IZT1 |
| 厂商： | Intersil |
| 文件页数： | 13/23页 |
| 文件大小： | 0K |
| 描述： | IC BIAS CTRLR UNIV SNSR 14-TSSOP |
| 标准包装： | 2,500 |
| 类型： | 传感器调节器 |
| 输入类型： | 电压 |
| 输出类型： | 电压 |
| 接口： | 2 线 |
| 电流 - 电源： | 15mA |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 14-TSSOP（0.173"，4.40mm 宽） |
| 供应商设备封装： | 14-TSSOP |
| 包装： | 带卷 (TR) |
20
FN8216.3
February 20, 2008
For example, if the master writes 12 bytes to a 16-byte page
starting at location 11 (decimal), the first 5 bytes are written
to locations 11 through 15, while the last 7 bytes are written
to locations 0 through 6 within that page. Afterwards, the
address counter would point to location 7. If the master
supplies more than 16 bytes of data, then new data
overwrites the previous data, one byte at a time. See
Figure 20.
The master terminates the loading of Data Bytes by issuing
a STOP condition, which initiates the nonvolatile write cycle.
As with the Byte Write operation, all inputs are disabled until
completion of the internal write cycle.
A Page Write operation cannot be performed on the page at
locations 80h through 8Fh. The next section describes the
special cases within that page.
A Page Write operation starting with byte address FFh,
accesses the page between locations 100h and 10Fh. The
first data byte of such operation is written to location 100h.
Writing to Control Registers
The byte at location 80h, 85h, and 86h are written using Byte
Write operations. They cannot be written using a Page Write
operation.
Control bytes 1 through 4, at locations 81h through 84h
respectively, are written during a single operation (see
Figure 21). The sequence must be: a START, followed by a
Slave Address byte, with the R/W bit equal to “0”, followed by
81h as the Address Byte, and then followed by exactly four
Data Bytes, and a STOP condition. The first data byte is
written to location 81h, the second to 82h, the third to 83h,
and the last one to 84h.
S
T
A
R
T
S
T
O
P
SLAVE
ADDRESS
BYTE
DATA
BYTE
A
C
K
SIGNALS FROM
THE MASTER
SIGNALS FROM
THE SLAVE
A
C
K
1
0
1
00
A
C
K
WRITE
SIGNAL AT SDA
FIGURE 18. BYTE WRITE SEQUENCE
2 < n < 16
SIGNALS FROM
THE MASTER
SIGNALS FROM
THE SLAVE
SIGNAL AT SDA
S
T
A
R
T
SLAVE
ADDRESS
BYTE
A
C
K
A
C
K
1
0
1
00
DATA BYTE (1)
S
T
O
P
A
C
K
A
C
K
DATA BYTE (N)
WRITE
FIGURE 19. PAGE WRITE OPERATION
5 BYTES
7 BYTES
ADDRESS = 6
5 BYTES
ADDRESS POINTER
ADDRESS = 15
ADDRESS = 11
ENDS UP HERE
ADDRESS = 7
ADDRESS = 0
FIGURE 20. EXAMPLE: WRITING 12 BYTES TO A 16-BYTE PAGE STARTING AT LOCATION 11
X96012
相关PDF资料 |
PDF描述 |
|---|---|
| X9C303V8T2 | IC XDCP 100-TAP 32K EE 8-TSSOP |
| X9C503ST2 | IC XDCP 100-TAP 50K EE 8-SOIC |
| XA2C128-8CPG132Q | IC CPLD 128MC 100 I/O 132CSBGA |
| XA2C32A-7VQG44Q | IC CPLD 32MCELL 33 I/O 44-VQFP |
| XA2C384-11TQG144Q | IC CPLD 384MCELL 118 I/O 144TQFP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| X9601XEVAL | 制造商:Intersil Corporation 功能描述:X9601 EVALUATION BOARD - Bulk |
| X9650M | 制造商:EPCOS 制造商全称:EPCOS 功能描述:Bandpass Filter |
| X-97-488 | 制造商:Brady Corporation 功能描述:Labels External Width:0.9" 制造商:Brady Corporation 功能描述:LABEL IDENTIFICATION 22.86X22.86 BLK/WHT; Background Color:White; Color:Black on White; External Width:0.9"; For Use With:IDXPERT Hand-Held Labeler; Label Material:Polyester; Label Size:22.86 x 22.86mm; Label Type:Identification ;RoHS Compliant: Yes |
| X97494 | 制造商:Mersen 功能描述:FUSE BS88-4 25A |
| X98014 | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:140MHz Triple Video Digitizer with Digital PLL |
发布紧急采购，3分钟左右您将得到回复。