- 您现在的位置：买卖IC网 > PDF目录19907 > XCF01SVOG20C (Xilinx Inc)IC PROM SRL FOR 1M GATE 20-TSSOP PDF资料下载
参数资料
| 型号： | XCF01SVOG20C |
| 厂商： | Xilinx Inc |
| 文件页数： | 23/35页 |
| 文件大小： | 0K |
| 描述： | IC PROM SRL FOR 1M GATE 20-TSSOP |
| 标准包装： | 74 |
| 可编程类型： | 系统内可编程 |
| 存储容量： | 1Mb |
| 电源电压： | 3 V ~ 3.6 V |
| 工作温度： | -40°C ~ 85°C |
| 封装/外壳： | 20-TSSOP（0.173"，4.40mm 宽） |
| 供应商设备封装： | 20-TSSOP |
| 包装： | 管件 |
| 产品目录页面： | 601 (CN2011-ZH PDF) |
| 其它名称： | 122-1286-5 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页当前第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页
Platform Flash In-System Programmable Configuration PROMs
DS123 (v2.18) May 19, 2010
Product Specification
3
R
See UG161, Platform Flash PROM User Guide, for detailed
guidelines on PROM-to-FPGA configuration hardware
connections, for software usage, for a reference list of Xilinx
FPGAs, and for the respective compatible Platform Flash
PROMs. Table 2 lists the Platform Flash PROMs and their
capacities.
Programming
The Platform Flash PROM is a reprogrammable NOR flash
device (refer "Quality and Reliability Characteristics,"
page 14 for the program/erase specifications).
Reprogramming requires an erase followed by a program
operation. A verify operation is recommended after the
program operation to validate the correct transfer of data
from the programmer source to the Platform Flash PROM.
Several programming solutions are available.
In-System Programming
In-System Programmable PROMs can be programmed
individually, or two or more can be daisy-chained together
and programmed in-system via the standard 4-pin JTAG
protocol as shown in Figure 3.
In-system programming offers quick and efficient design
iterations and eliminates unnecessary package handling or
socketing of devices. The programming data sequence is
delivered to the device using either Xilinx iMPACT software
and a Xilinx download cable, a third-party JTAG
development system, a JTAG-compatible board tester, or a
simple microprocessor interface that emulates the JTAG
instruction sequence. The iMPACT software also outputs
serial vector format (SVF) files for use with any tools that
accept SVF format, including automatic test equipment.
During in-system programming, the CEO output is driven
High. All other outputs are held in a high-impedance state or
held at clamp levels during in-system programming. All
non-JTAG input pins are ignored during in-system
programming, including CLK, CE, CF, OE/RESET, BUSY,
EN_EXT_SEL, and REV_SEL[1:0]. In-system programming
is fully supported across the recommended operating
voltage and temperature ranges.
Embedded, in-system programming reference designs,
such as XAPP058, Xilinx In-System Programming Using an
Embedded Microcontroller, are available on the Xilinx web
an advanced update methodology that uses the Design
Revisioning feature in the Platform Flash XCFxxP PROMs.
OE/RESET
The 1/2/4 Mb XCFxxS Platform Flash PROMs in-system
programming algorithm results in issuance of an internal
device reset that causes OE/RESET to pulse Low.
External Programming
In traditional manufacturing environments, third-party
device programmers can program Platform Flash PROMs
with an initial memory image before the PROMs are
assembled onto boards. Contact a preferred third-party
programmer vendor for Platform Flash PROM support
information. A sample list of third-party programmer
vendors with Platform Flash PROM support is available on
the Xilinx web page for Third-Party Programmer Device
for the PROM data file format required for programmers.
Pre-programmed PROMs can be assembled onto boards
using the typical soldering process guidelines in UG112,
Device Package User Guide. A pre-programmed PROM’s
memory image can be updated after board assembly using
an in-system programming solution.
Reliability and Endurance
Xilinx in-system programmable products provide a
guaranteed endurance level of 20,000 in-system
program-erase cycles and a minimum data retention of 20
years. Each device meets all functional, performance, and
data retention specifications within this endurance limit.
See UG116, Xilinx Device Reliability Report, for device
quality, reliability, and process node information.
Table 2: Platform Flash PROM Capacity
Platform
Flash PROM
Configuration
Bits
Platform
Flash PROM
Configuration
Bits
XCF01S
1,048,576
XCF08P
8,388,608
XCF02S
2,097,152
XCF16P
16,777,216
XCF04S
4,194,304
XCF32P
33,554,432
X-Ref Target - Figure 3
Figure 3: JTAG In-System Programming Operation
(a)SolderDevicetoPCB
(b) Program Using Download Cable
DS123_33_031908
GND
V CC
(a)
(b)
相关PDF资料 |
PDF描述 |
|---|---|
| EEM10DRYF | CONN EDGECARD 20POS DIP .156 SLD |
| V48C8H100BG | CONVERTER MOD DC/DC 8V 100W |
| EPC16UC88N | IC CONFIG DEVICE 16MBIT 88-UBGA |
| LTC4301IDD#TR | IC BUFFER BUS HOTSWAP 2WR 8DFN |
| AGM22DTBH | CONN EDGECARD 44POS R/A .156 SLD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| XCF01SVOG20C0100 | 制造商:Xilinx 功能描述:XLXXCF01SVOG20C0100 IC SYSTEM GATE |
| XCF01SVOG20C0936 | 制造商:Xilinx 功能描述:XLXXCF01SVOG20C0936 IC SYSTEM GATE |
| XCF01SVOG48 | 制造商:XILINX 制造商全称:XILINX 功能描述:Platform Flash In-System Programmable Configuration PROMS |
| XCF01SX | 制造商:XILINX 制造商全称:XILINX 功能描述:Platform Flash In-System Programmable Configuration PROMS |
| XCF02S | 制造商:XILINX 制造商全称:XILINX 功能描述:Platform Flash In-System Programmable Configuration PROMs |
发布紧急采购，3分钟左右您将得到回复。