参数资料
| 型号： | AD7294BCPZRL |
| 厂商： | Analog Devices Inc |
| 文件页数： | 33/49页 |
| 文件大小： | 0K |
| 描述： | IC ADC 12BIT I2C/SRL 1M 56LFCSP |
| 标准包装： | 2,500 |
| 类型： | ADC，DAC |
| 分辨率（位）： | 12 b |
| 采样率（每秒）： | 22.22k |
| 数据接口： | I²C，串行 |
| 电压电源： | 模拟和数字 |
| 电源电压： | 4.4 V ~ 5.5 V |
| 工作温度： | -40°C ~ 105°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 56-VFQFN 裸露焊盘，CSP |
| 供应商设备封装： | 56-LFCSP-VQ（8x8） |
| 包装： | 带卷 (TR) |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页当前第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页
AD7294
Data Sheet
Rev. H | Page 38 of 48
Reading Data from an 8-Bit Register
Reading the contents from any of the 8-bit registers is a single
byte read operation, as shown in Figure 55. In this protocol, the
first part of the transaction writes to the register pointer. When
the register address has been set up, any number of reads can be
performed from that particular register without having to write
to the address pointer register again. When the required number
of reads is completed, the master should not acknowledge the final
byte. This tells the slave to stop transmitting, allowing a stop
condition to be asserted by the master. Further reads from this
register can be performed in a future transaction without
having to rewrite to the register pointer.
If a read from a different address is required, the relevant
register address has to be written to the address pointer register,
and again, any number of reads from this register can then be
performed. In the next example, the master device receives two
bytes from a slave device as follows:
1. The master device asserts a start condition on SDA.
2. The master sends the 7-bit slave address followed by the
read bit (high).
3. The addressed slave device asserts an acknowledge
on SDA.
4. The master receives a data byte.
5. The master asserts an acknowledge on SDA.
6. The master receives another 8-bit data byte.
7. The master asserts a no acknowledge (NACK) on SDA to
inform the slave that the data transfer is complete.
8. The master asserts a stop condition on SDA, and the
transaction ends.
Reading Two Bytes of Data from a 16-Bit Register
In this example, the master device reads three lots of two-byte
data from a slave device, but as many lots consisting of two-
bytes can be read as required. This protocol assumes that the
particular register address has been set up by a single byte write
operation to the address pointer register (see the previous read
example).
1. The master device asserts a start condition on SDA.
2. The master sends the 7-bit slave address followed by the
read bit (high).
3. The addressed slave device asserts an acknowledge
on SDA.
4. The master receives a data byte.
5. The master asserts an acknowledge on SDA.
6. The master receives a second data byte.
7. The master asserts an acknowledge on SDA.
8. The master receives a data byte.
9. The master asserts an acknowledge on SDA.
10. The master receives a second data byte.
11. The master asserts an acknowledge on SDA.
12. The master receives a data byte.
13. The master asserts an acknowledge on SDA.
14. The master receives a second data byte.
15. The master asserts a no acknowledge on SDA to notify the
slave that the data transfer is complete.
16. The master asserts a stop condition on SDA to end the
transaction.
05747-
060
S
A
P
...
1
A
SLAVE ADDRESS
DATA<7:0>
DATA<15:8>
FROM MASTER TO SLAVE
FROM SLAVE TO MASTER
S = START CONDITION
SR = REPEATED START
P = STOP CONDITION
A = ACKNOWLEDGE
A = NOT ACKNOWLEDGE
Figure 54. Reading Three Lots of Two Bytes of Data from the Conversion Result Register
05747-
055
S
0
A
P
REG POINTER
...
SR
1
A
SLAVE ADDRESS
DATA<7:0>
FROM MASTER TO SLAVE
FROM SLAVE TO MASTER
S = START CONDITION
SR = REPEATED START
P = STOP CONDITION
A = ACKNOWLEDGE
A = NOT ACKNOWLEDGE
Figure 55. Reading Two Single Bytes of Data from a Selected Register
相关PDF资料 |
PDF描述 |
|---|---|
| AD7306AN | IC TXRX RS-232 RS-422 24-DIP |
| AD7339BSZ-REEL | IC ADC/QUAD DAC 5V W/REF 52-MQFP |
| AD7376ARUZ100 | IC POT DIGITAL 128POS 14-TSSOP |
| AD7391SRZ | IC DAC 10BIT SERIAL 3V 8SOIC |
| AD7392AR | IC DAC 12BIT PARALLEL 3V 20-SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD7294BSUZ | 功能描述:模数转换器 - ADC 12B Monitor & Cntrl System w/ Temp Sensr RoHS:否 制造商:Analog Devices 通道数量: 结构: 转换速率: 分辨率: 输入类型: 信噪比: 接口类型: 工作电源电压: 最大工作温度: 安装风格: 封装 / 箱体: |
| AD7294BSUZRL | 制造商:Analog Devices 功能描述:Temp Sensor Digital Serial (2-Wire, I2C) 64-Pin TQFP 制造商:Analog Devices 功能描述:TEMP SENSOR DGTL SERL (2-WIRE, I2C) 64TQFP - Tape and Reel 制造商:Analog Devices 功能描述:IC ADC 12BIT W/DAC/TEMP 64TQFP 制造商:Analog Devices Inc. 功能描述:Analog to Digital Converters - ADC 12-Bit Multi-Channel ADC DAC wt Temp IC 制造商:Analog Devices 功能描述:CONVERTER - ADC |
| AD7298 | 制造商:AD 制造商全称:Analog Devices 功能描述:8-Channel, 1MSPS, 12-Bit SAR ADC with Temperature Sensor |
| AD7298-1BCPZ | 功能描述:IC ADC 10BIT SPI/SRL 8CH 20LFCSP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 其它有关文件:TSA1204 View All Specifications 标准包装:1 系列:- 位数:12 采样率（每秒）:20M 数据接口:并联 转换器数目:2 功率耗散（最大）:155mW 电压电源:模拟和数字 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:48-TQFP 供应商设备封装:48-TQFP（7x7） 包装:Digi-Reel® 输入数目和类型:4 个单端，单极；2 个差分，单极 产品目录页面:1156 (CN2011-ZH PDF) 其它名称:497-5435-6 |
| AD7298-1BCPZ-RL | 功能描述:IC ADC 10BIT SPI/SRL 8CH 20LFCSP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:2,500 系列:- 位数:16 采样率（每秒）:15 数据接口:MICROWIRE?，串行，SPI? 转换器数目:1 功率耗散（最大）:480µW 电压电源:单电源 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:38-WFQFN 裸露焊盘 供应商设备封装:38-QFN（5x7） 包装:带卷 (TR) 输入数目和类型:16 个单端，双极；8 个差分，双极 配用:DC1011A-C-ND - BOARD DELTA SIGMA ADC LTC2494 |
发布紧急采购，3分钟左右您将得到回复。