参数资料
| 型号： | AD9548BCPZ |
| 厂商： | Analog Devices Inc |
| 文件页数： | 8/112页 |
| 文件大小： | 0K |
| 描述： | IC CLOCK GEN/SYNCHRONIZR 88LFCSP |
| 产品变化通告： | AD9548 Mask Change 20/Oct/2010 |
| 标准包装： | 1 |
| 类型： | 时钟/频率发生器，同步器 |
| PLL： | 是 |
| 主要目的： | 以太网，SONET/SDH，Stratum |
| 输入： | CMOS，LVDS，LVPECL |
| 输出： | CMOS，LVDS，LVPECL |
| 电路数： | 1 |
| 比率 - 输入:输出： | 1:1 |
| 差分 - 输入:输出： | 是/是 |
| 频率 - 最大： | 750kHz |
| 电源电压： | 1.71 V ~ 3.465 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 88-VFQFN 裸露焊盘，CSP |
| 供应商设备封装： | 88-LFCSP-VQ（12x12） |
| 包装： | 托盘 |
第1页第2页第3页第4页第5页第6页第7页当前第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页第69页第70页第71页第72页第73页第74页第75页第76页第77页第78页第79页第80页第81页第82页第83页第84页第85页第86页第87页第88页第89页第90页第91页第92页第93页第94页第95页第96页第97页第98页第99页第100页第101页第102页第103页第104页第105页第106页第107页第108页第109页第110页第111页第112页
Data Sheet
AD9548
Rev. E | Page 105 of 112
Table 151. EEPROM Storage Sequence for Profile 4 and Profile 5 Settings
Address
Bits
Bit Name
Description
0x0E28
[7:0]
Profile 4 and Profile 5
The default value of this register is 0x63, which the controller interprets as a data
instruction. Its decimal value is 99, which this tells the controller to transfer 100
bytes of data (99 + 1) beginning at the address specified by the next two bytes. The
controller stores 0x63 in the EEPROM and increments the EEPROM address pointer.
0x0E29
[7:0]
Profile 4 and Profile 5
The default value of these two registers is 0x0700. Note that Register 0x0E29 and
Register 0x0E2A are the most significant and least significant bytes of the target
address, respectively. Because the previous register contains a data instruction,
these two registers define a starting address (in this case, 0x0700). The controller
stores 0x0700 in the EEPROM and increments the EEPROM pointer by 2. It then
transfers 100 bytes from the register map (beginning at Address 0x0700) to the
EEPROM and increments the EEPROM address pointer by 101 (100 data bytes and
one checksum byte). The 99 bytes transferred correspond to the Profile 4 and
Profile 5 parameters in the register map.
0x0E2A
[7:0]
Table 152. EEPROM Storage Sequence for Profile 6 and Profile 7 Settings
Address
Bits
Bit Name
Description
0x0E2B
[7:0]
Profile 6 and Profile 7
The default value of this register is 0x63, which the controller interprets as a data
instruction. Its decimal value is 99, which this tells the controller to transfer 100
bytes of data (99 + 1) beginning at the address specified by the next two bytes. The
controller stores 0x63 in the EEPROM and increments the EEPROM address pointer.
0x0E2C
[7:0]
Profile 6 and Profile 7
The default value of these two registers is 0x0780. Note that Register 0x0E2C and
Register 0x0E2C are the most significant and least significant bytes of the target
address, respectively. Because the previous register contains a data instruction,
these two registers define a starting address (in this case, 0x0780). The controller
stores 0x0780 in the EEPROM and increments the EEPROM pointer by 2. It then
transfers 100 bytes from the register map (beginning at Address 0x0780) to the
EEPROM and increments the EEPROM address pointer by 101 (100 data bytes and
one checksum byte). The 99 bytes transferred correspond to the Profile 6 and
Profile 7 parameters in the register map.
0x0E2D
[7:0]
0x0E2E
[7:0]
I/O update
The default value of this register is 0x80, which the controller interprets as an I/O
update instruction. The controller stores 0x80 in the EEPROM and increments the
EEPROM address pointer.
Table 153. EEPROM Storage Sequence for Operational Control Settings
Address
Bits
Bit Name
Description
0x0E2F
[7:0]
Operational controls
The default value of this register is 0x10, which the controller interprets as a data
instruction. Its decimal value is 16, this tells the controller to transfer 17 bytes of
data (16 + 1) beginning at the address specified by the next two bytes. The
controller stores 0x10 in the EEPROM and increments the EEPROM address pointer.
0x0E30
[7:0]
Operational controls
The default value of these two registers is 0x0A00. Note that Register 0x0E30 and
Register 0x0E31 are the most significant and least significant bytes of the target
address, respectively. Because the previous register contains a data instruction,
these two registers define a starting address (in this case, 0x0A00). The controller
stores 0x0A00 in the EEPROM and increments the EEPROM pointer by 2. It then
transfers 17 bytes from the register map (beginning at Address 0x0A00) to the
EEPROM and increments the EEPROM address pointer by 18 (17 data bytes and one
checksum byte). The 17 bytes transferred correspond to the operational controls
parameters in the register map.
0x0E31
[7:0]
0x0E32
[7:0]
I/O update
The default value of this register is 0x80, which the controller interprets as an I/O
update instruction. The controller stores 0x80 in the EEPROM and increments the
EEPROM address pointer.
相关PDF资料 |
PDF描述 |
|---|---|
| V375C36M150BL3 | CONVERTER MOD DC/DC 36V 150W |
| MAX3676EHJ+ | IC CLOCK RECOVERY 32-TQFP |
| ADN2813ACPZ | IC CLK/DATA REC 1.25GBPS 48LFCSP |
| AD800-52BRZ | IC CLK\DATA RECOVERY PLL 20SOIC |
| SY87700VZH | IC CLK/DATA RECOVERY 3.3V 28SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD9548BCPZ-REEL7 | 功能描述:IC CLOCK GEN/SYNCHRONIZR 88LFCSP RoHS:是 类别:集成电路 (IC) >> 时钟/计时 - 专用 系列:- 标准包装:28 系列:- 类型:时钟/频率发生器 PLL:是 主要目的:Intel CPU 服务器 输入:时钟 输出:LVCMOS 电路数:1 比率 - 输入:输出:3:22 差分 - 输入:输出:无/是 频率 - 最大:400MHz 电源电压:3.135 V ~ 3.465 V 工作温度:0°C ~ 85°C 安装类型:表面贴装 封装/外壳:64-TFSOP （0.240"，6.10mm 宽） 供应商设备封装:64-TSSOP 包装:管件 |
| AD9548XCPZ | 制造商:Analog Devices 功能描述: |
| AD9549 | 制造商:AD 制造商全称:Analog Devices 功能描述:Dual Input Network Clock Generator/Synchronizer |
| AD9549/PCBZ | 制造商:Analog Devices 功能描述:DUAL INPUT NETWORK CLOCK GEN/SYNCHRONIZER - Bulk |
| AD9549A/PCBZ | 功能描述:BOARD EVALUATION FOR AD9549A RoHS:是 类别:编程器，开发系统 >> 评估演示板和套件 系列:- 标准包装:1 系列:PSoC® 主要目的:电源管理，热管理 嵌入式:- 已用 IC / 零件:- 主要属性:- 次要属性:- 已供物品:板，CD，电源 |
发布紧急采购，3分钟左右您将得到回复。