参数资料
型号: BX80552661
厂商: INTEL CORP
元件分类: 微控制器/微处理器
英文描述: 32-BIT, 3600 MHz, MICROPROCESSOR, PBGA775
封装: FLIP CHIP, LGA-775
文件页数: 93/108页
文件大小: 3283K
代理商: BX80552661
Datasheet
87
Thermal Specifications and Design Considerations
When calculating a temperature based on thermal diode measurements, a number of parameters
must be either measured or assumed. Most devices measure the diode ideality and assume a series
resistance and ideality trim value, although some are capable of also measuring the series
resistance. Calculating the temperature is then accomplished using the equations listed under
Table 5-3. In most temperature sensing devices, an expected value for the diode ideality is
designed-in to the temperature calculation equation. If the designer of the temperature sensing
device assumes a perfect diode the ideality value (also called ntrim) will be 1.000. Given that most
diodes are not perfect, the designers usually select an ntrim value that more closely matches the
behavior of the diodes in the processor. If the processors diode ideality deviates from that of ntrim,
each calculated temperature will be offset by a fixed amount. This temperature offset can be
calculated with the equation:
Terror(nf) = Tmeasured X (1 – nactual/ntrim)
Where Terror(nf) is the offset in degrees C, Tmeasured is in Kelvin, nactual is the measured ideality of
the diode, and ntrim is the diode ideality assumed by the temperature sensing device.
To improve the accuracy of diode based temperature measurements, a new register (Tdiode_Offset)
has been added to processor that will contain thermal diode characterization data. During
manufacturing each processors thermal diode will be evaluated for its behavior relative to a
theoretical diode. Using the equation above, the temperature error created by the difference
between ntrim and the actual ideality of the particular processor will be calculated. This value
(Tdiode_Offset) will be programmed in to the new diode correction MSR and when added to the
Tdiode_Base value can be used to correct temperatures read by diode based temperature sensing
devices.
If the ntrim value used to calculate Tdiode_Offset differs from the ntrim value used in a temperature
sensing device, the Terror(nf) may not be accurate. If desired, the Tdiode_Offset can be adjusted by
calculating nactual and then recalculating the offset using the actual ntrim as defined in the
temperature sensor manufacturers' datasheet.
The Diode_Base value and ntrim used to calculate the Diode_Correction_Offset are listed in
§
Table 5-5. Thermal “Diode” ntrim and Diode_Correction_Offset
Symbol
Parameter
Unit
ntrim
Diode ideality used to calculate Diode_Offset
1.008
Diode_Base
0
C
Table 5-6. Thermal Diode Interface
Signal Name
Land Number
Signal Description
THERMDA
AL1
diode anode
THERMDC
AK1
diode cathode
相关PDF资料
PDF描述
BX80552651T2 32-BIT, 3400 MHz, MICROPROCESSOR, PBGA775
BX80552641T 32-BIT, 3200 MHz, MICROPROCESSOR, PBGA775
BX80552641T2 32-BIT, 3200 MHz, MICROPROCESSOR, PBGA775
BX805555060P 64-BIT, MICROPROCESSOR, BGA771
BX805555080P 64-BIT, MICROPROCESSOR, BGA771
相关代理商/技术参数
参数描述
BX80552661T2 制造商:Intel 功能描述:P4 661 3.6GHZ LP-BTX 2MB - Boxed Product (Development Kits)
BX80553915 S L9KB 制造商:Intel 功能描述:
BX80553915R S L9DA 制造商:Intel 功能描述:
BX80553925 S L9KA 制造商:Intel 功能描述:
BX80553945 S L9QQ 制造商:Intel 功能描述:PENTIUM D PROCESSOR 945