收藏本站
参数资料
型号： KSZ8842-PMQL-EVAL
厂商： Micrel Inc
文件页数： 41/119页
文件大小： 0K
描述： BOARD EVALUATION KSZ8842-PMQL
标准包装： 1
主要目的： 接口，以太网控制器（PHY 和 MAC）
嵌入式： 否
已用 IC / 零件： KSZ8842-PMQL
主要属性： 2 个端口，100BASE-TX/10BASE-T
次要属性： 8/16 位接口，LinkMD 线缆诊断
已供物品： 板
产品目录页面： 1114 (CN2011-ZH PDF)
相关产品： 576-3348-ND - IC ETHERNET SW 2PORT 100-LFBGA
576-3089-ND - IC ETHERNT SW 2PORT PCI 100LFBGA
576-2121-ND - IC ETHERNET SW 2PORT PCI 128PQFP
576-1513-5-ND - IC SWITCH 10/100 32BIT 128-PQFP
其它名称： 576-1636
Micrel, Inc.
KSZ8842-PMQL/PMBL
October 2007
28
M9999-100207-1.5
MAC Operation
The KSZ8842-PMQL/PMBL strictly abides by IEEE 802.3 standards to maximize compatibility. Additionally, there is an
added MAC filtering function to filter unicast packets. The MAC filtering function is useful in applications such as VoIP
where restricting certain packets reduces congestion and thus improves performance.
Inter Packet Gap (IPG)
If a frame is successfully transmitted, the minimum 96-bits time for IPG is measured between two consecutive packets.
If the current packet is experiencing collisions, the minimum 96-bits time for IPG is measured from Carrier Sense (CSR)
to the next transmit packet.
Back-Off Algorithm
The KSZ8842-PMQL/PMBL implements the IEEE standard 802.3 binary exponential back-off algorithm in half-duplex
mode, and optional "aggressive mode" back-off. After 16 collisions, the packet is optionally dropped depending on the
switch configuration in SGCR1[8].
Late Collision
If a transmit packet experiences collisions after 512 bit times of the transmission, the packet is dropped.
Illegal Packet Size
The KSZ8842-PMQL/PMBL discards packets that are less than 64 bytes in size and can be programmed to accept
packet sizes up to 1536 bytes in SGCR2[1]. The KSZ8842-PMQL/PMBL can also be programmed for special
applications to accept packet sizes up to 1916 bytes in SGCR2[2].
Flow Control
The KSZ8842-PMQL/PMBL supports standard 802.3x flow control frames on both transmit and receive sides.
On the receive side, if the KSZ8842-PMQL/PMBL receives a pause control frame, the KSZ8842-PMQL/PMBL will not
transmit the next normal frame until the timer, specified in the pause control frame, expires. If another pause frame is
received before the current timer expires, the timer will be updated with the new value in the second pause frame.
During this period (while it is flow controlled), only flow control packets from the KSZ8842-PMQL/PMBL are transmitted.
On the transmit side, the KSZ8842-PMQL/PMBL has intelligent and efficient ways to determine when to invoke flow
control. The flow control is based on availability of the system resources, including available buffers, available transmit
queues, and available receive queues.
The KSZ8842-PMQL/PMBL will flow control a port that has just received a packet if the destination port resource is
busy. The KSZ8842-PMQL/PMBL issues a flow control frame (XON), containing the maximum pause time defined in
IEEE standard 802.3x. Once the resource is freed up, the KSZ8842-PMQL/PMBL sends out the other flow control
frame (XOFF) with zero pause time to turn off the flow control (turn on transmission to the port). A hysteresis feature is
provided to prevent the flow control mechanism from being constantly activated and deactivated.
Half-Duplex Backpressure
A half-duplex backpressure option (not in IEEE 802.3 standards) is also provided. The activation and deactivation
conditions are the same in full-duplex mode. If backpressure is required, the KSZ8842-PMQL/PMBL sends preambles
to defer the other stations' transmission (carrier sense deference).
To avoid jabber and excessive deference (as defined in the 802.3 standard), after a certain time, the KSZ8842-
PMQL/PMBL discontinues the carrier sense and then raises it again quickly. This short silent time (no carrier sense)
prevents other stations from sending out packets thus keeping other stations in a carrier sense deferred state. If the
port has packets to send during a backpressure situation, the carrier sense type backpressure is interrupted and those
packets are transmitted instead. If there are no additional packets to send, carrier sense type backpressure is
reactivated again until switch resources free up. If a collision occurs, the binary exponential back-off algorithm is
skipped and carrier sense is generated immediately, thus reducing the chance of further collisions and carrier sense is
maintained to prevent packet reception.
To ensure no packet loss in 10 BASE-T or 100 BASE-TX half-duplex modes, the user must enable the following:
1.
Aggressive back off (bit 8 in SGCR1)
2.
No excessive collision drop (bit 3 in SGCR2)
Note: These bits are not set by default, since this is not the IEEE standard.
相关PDF资料
PDF描述
V24C8C100B CONVERTER MOD DC/DC 8V 100W
202K185-25/225-0 BOOT MOLDED
HMM06DRKH CONN EDGECARD 12POS DIP .156 SLD
202D274-4-61/42-0 BOOT MOLDED
SFSD-30-28-H-10.00-SR CABLE ASSY SOCKET 60POS 28AWG
相关代理商/技术参数
参数描述
KSZ8842-PMQLI 功能描述:以太网 IC 2-Port Ethernet Switch/Repeater + 32-bit/33MHz PCI bus interface, Ind Temp (Lead Free) RoHS:否 制造商:Micrel 产品:Ethernet Switches 收发器数量:2 数据速率:10 Mb/s, 100 Mb/s 电源电压-最大:1.25 V, 3.45 V 电源电压-最小:1.15 V, 3.15 V 最大工作温度:+ 85 C 封装 / 箱体:QFN-64 封装:Tray
KSZ8851-16MLL 功能描述:以太网 IC Single Ethernet Port + Generic (16-bit) Bus Interface(Lead Free) RoHS:否 制造商:Micrel 产品:Ethernet Switches 收发器数量:2 数据速率:10 Mb/s, 100 Mb/s 电源电压-最大:1.25 V, 3.45 V 电源电压-最小:1.15 V, 3.15 V 最大工作温度:+ 85 C 封装 / 箱体:QFN-64 封装:Tray
KSZ8851-16MLL TR 功能描述:以太网 IC Single Ethernet Port + Generic (16-bit) Bus Interface(Lead Free) RoHS:否 制造商:Micrel 产品:Ethernet Switches 收发器数量:2 数据速率:10 Mb/s, 100 Mb/s 电源电压-最大:1.25 V, 3.45 V 电源电压-最小:1.15 V, 3.15 V 最大工作温度:+ 85 C 封装 / 箱体:QFN-64 封装:Tray
KSZ8851-16MLL-EVAL 功能描述:以太网开发工具 Single Ethernet Port + Generic (16-bit) Bus Interface(Lead Free) Eval Board RoHS:否 制造商:Micrel 产品:Evaluation Boards 类型:Ethernet Transceivers 工具用于评估:KSZ8873RLL 接口类型:RMII 工作电源电压:
KSZ8851-16MLL-EVAL 制造商:Micrel Inc 功能描述:BOARD EVALUATION FOR KSZ8851-16MLL
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*