参数资料
型号: KSZ8842-PMQL-EVAL
厂商: Micrel Inc
文件页数: 70/119页
文件大小: 0K
描述: BOARD EVALUATION KSZ8842-PMQL
标准包装: 1
主要目的: 接口,以太网控制器(PHY 和 MAC)
嵌入式:
已用 IC / 零件: KSZ8842-PMQL
主要属性: 2 个端口,100BASE-TX/10BASE-T
次要属性: 8/16 位接口,LinkMD 线缆诊断
已供物品:
产品目录页面: 1114 (CN2011-ZH PDF)
相关产品: 576-3348-ND - IC ETHERNET SW 2PORT 100-LFBGA
576-3089-ND - IC ETHERNT SW 2PORT PCI 100LFBGA
576-2121-ND - IC ETHERNET SW 2PORT PCI 128PQFP
576-1513-5-ND - IC SWITCH 10/100 32BIT 128-PQFP
其它名称: 576-1636
Micrel, Inc.
KSZ8842-PMQL/PMBL
October 2007
54
M9999-100207-1.5
Switch Global Control Register 2 (Offset 0x0404): SGCR2
This register contains the global control for the switch function.
Bit
Default
R/W
Description
15
0
RW
802.1Q VLAN enable
1 = 802.1Q VLAN mode is turned on. VLAN table needs to set up before
the operation.
0 = 802.1Q VLAN is disabled.
14
0
RW
IGMP snoop enable
1 = IGMP snoop is enabled. All the IGMP packets will be forwarded to the
host port.
0 = IGMP snoop is disabled.
13
0
RW
IPv6 MLD snooping enable
1 = enable IPv6 MLD snooping
12
0
RW
IPv6 MLD snooping option
1 = enable IPv6 MLD snooping option.
11
0
RW
Priority Scheme select
0 = always TX higher priority packets first
1 = Weighted Fair Queuing enable. When all 4 queues has packets
waiting to TX, the bandwidth allocation is q3:q2:q1:q0 = 8:4:2:1. If any
queues is empty, the highest non-empty queue will get one more
weighting. For example, if q2 is empty, q3:q2:q1:q0 will become (8+1): 0
:2 : 1.
10 – 9
0
RW
Reserved.
For factory test purposes only. Always write 0.
8
0
RW
Sniff mode select
1 = will do RX AND TX sniff (both source port and destination port need to
match)
0 = will do RX OR TX sniff (Either source port or destination port needs to
match). This is the mode used to implement rx only sniff.
7
1
RW
Unicast port-VLAN mismatch discard
1 = all packets can not cross VLAN boundary
0 = unicast packets (excluding unknown/multicast/broadcast) can cross
VLAN boundary
6
1
RW
Multicast storm protection disable
1 = “Broadcast Storm Protection” does not include multicast packets. Only
DA = FFFFFFFFFFFF packets will be regulated.
0 = “Broadcast Storm Protection” includes DA = FFFFFFFFFFFF and
DA[40] = 1 packets.
5
1
RW
Back pressure mode
1 = carrier sense based backpressure is selected
0 = collision based backpressure is selected
4
1
RW
Flow control and back pressure fair mode
1 = fair mode is selected. In this mode, if a flow control port and a non-
flow control port talk to the same destination port, packets from the non-
flow control port may be dropped. This is to prevent the flow control port
from being flow controlled for an extended period of time.
0 = in this mode, if a flow control port and a non-flow control port talk to
the same destination port, the flow control port will be flow controlled.
This may not be “fair” to the flow control port.
相关PDF资料
PDF描述
V24C8C100B CONVERTER MOD DC/DC 8V 100W
202K185-25/225-0 BOOT MOLDED
HMM06DRKH CONN EDGECARD 12POS DIP .156 SLD
202D274-4-61/42-0 BOOT MOLDED
SFSD-30-28-H-10.00-SR CABLE ASSY SOCKET 60POS 28AWG
相关代理商/技术参数
参数描述
KSZ8842-PMQLI 功能描述:以太网 IC 2-Port Ethernet Switch/Repeater + 32-bit/33MHz PCI bus interface, Ind Temp (Lead Free) RoHS:否 制造商:Micrel 产品:Ethernet Switches 收发器数量:2 数据速率:10 Mb/s, 100 Mb/s 电源电压-最大:1.25 V, 3.45 V 电源电压-最小:1.15 V, 3.15 V 最大工作温度:+ 85 C 封装 / 箱体:QFN-64 封装:Tray
KSZ8851-16MLL 功能描述:以太网 IC Single Ethernet Port + Generic (16-bit) Bus Interface(Lead Free) RoHS:否 制造商:Micrel 产品:Ethernet Switches 收发器数量:2 数据速率:10 Mb/s, 100 Mb/s 电源电压-最大:1.25 V, 3.45 V 电源电压-最小:1.15 V, 3.15 V 最大工作温度:+ 85 C 封装 / 箱体:QFN-64 封装:Tray
KSZ8851-16MLL TR 功能描述:以太网 IC Single Ethernet Port + Generic (16-bit) Bus Interface(Lead Free) RoHS:否 制造商:Micrel 产品:Ethernet Switches 收发器数量:2 数据速率:10 Mb/s, 100 Mb/s 电源电压-最大:1.25 V, 3.45 V 电源电压-最小:1.15 V, 3.15 V 最大工作温度:+ 85 C 封装 / 箱体:QFN-64 封装:Tray
KSZ8851-16MLL-EVAL 功能描述:以太网开发工具 Single Ethernet Port + Generic (16-bit) Bus Interface(Lead Free) Eval Board RoHS:否 制造商:Micrel 产品:Evaluation Boards 类型:Ethernet Transceivers 工具用于评估:KSZ8873RLL 接口类型:RMII 工作电源电压:
KSZ8851-16MLL-EVAL 制造商:Micrel Inc 功能描述:BOARD EVALUATION FOR KSZ8851-16MLL