参数资料
型号: LMK04010BISQ/NOPB
厂商: National Semiconductor
文件页数: 32/65页
文件大小: 0K
描述: IC CLOCK CONDITIONER W/PLL 48LLP
标准包装: 1,000
系列: PowerWise®
类型: 时钟调节器
PLL:
输入: LVCMOS
输出: 2VPECL,LVPECL
电路数: 1
比率 - 输入:输出: 2:5
差分 - 输入:输出: 是/是
频率 - 最大: 1.296GHz
除法器/乘法器: 是/是
电源电压: 3.15 V ~ 3.45 V
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 48-WFQFN 裸露焊盘
供应商设备封装: 48-LLP(7x7)
包装: 带卷 (TR)
其它名称: LMK04010BISQ
SNOSAZ8J – SEPTEMBER 2008 – REVISED SEPTEMBER 2011
Table 20. EN_PLL2_XTAL: External Crystal Option
EN_PLL2_XTAL
Oscillator Amplifier State
0
OFF
1
ON
EN_Fout: Fout Power Down Bit
The EN_Fout bit allows the Fout port to be enabled or disabled. By default EN_Fout = 0.
CLK Global Enable: Clock Global enable bit
In addition to the external GOE pin, an internal Register 13 bit (b18) can be used to globally enable/disable the
clock outputs via the uWire programming interface. The default value is 1. When CLK Global Enable = 1, the
active output clocks are enabled. The active output clocks are disabled if this bit is 0.
POWERDOWN Bit -- Device Power Down
This bit can power down the entire device. Enabling this bit powers down the entire device and all functional
blocks, regardless of the state of any of the other bits or pins.
Table 21. Power Down Bit Values
POWERDOWN Bit
Mode
0
Normal Operation
1
Entire device powered down
EN_PLL2 REF2X: PLL2 Frequency Doubler control bit
When FOSCin is below 50 MHz, the PLL2 frequency doubler can be enabled by setting EN_PLL2_REF2X = 1. The
default value is 0. When EN_PLL2_REF2X = 1, the signal at the OSCin port bypasses the PLL2_R counter and
is passed through a frequency doubler circuit. The output of this circuit is then input to the PLL2 phase
comparator block. This feature allows the phase comparison frequency to be increased for lower frequency
OSCin sources (< 50 MHz), and can be used with either VXCOs or crystals. For instance, when using a pullable
crystal of 12.288 MHz to drive the OSCin port, the PLL2 phase comparison frequency is 24.576 MHz when
EN_PLL2_REF2X = 1. A higher PLL phase comparison frequency reduces PLL2 in-band phase noise and RMS
jitter. The PLL in-band phase noise can be reduced by approximately 2 to 3 dB. The on-chip loop filter typically is
enabled to reduce PLL2 reference spurs when EN_PLL2_REF2X is enabled. Suggested values in this case are:
R3 = 600
Ω, C3 = 50 pF, R4 = 10 kΩ, C4 = 60 pF.
PLL2 Internal Loop Filter Component Values
Internal loop filter components are available for PLL2, enabling the user to implement either 3rd or 4th order loop
filters without requiring external components. The user may select from a fixed set of values for both the resistors
and capacitors. Internal loop filter resistance values for R3 and R4 can be set individually according to Table 22
Table 22. PLL2 Internal Loop Filter Resistor Values, PLL2_R3_LF
PLL2_R3_LF [2:0]
RESISTANCE
b2
b1
b0
0
< 600
Ω
0
1
10 k
Ω
0
1
0
20 k
Ω
0
1
30 k
Ω
1
0
40 k
Ω
1
0
1
Invalid
1
0
Invalid
1
Invalid
38
Copyright 2008–2011, Texas Instruments Incorporated
相关PDF资料
PDF描述
LMV393MUTAG IC OP AMP DUAL GP LV LV 8-UDFN
LMX339HASD+T IC COMPARATOR GP QUAD 14-SOIC
LT1011AIS8#TRPBF IC VOLTAGE COMPARATOR 5V 8-SOIC
LT1016IS8#TRPBF IC COMPARATOR 10NS HI-SPD 8-SOIC
LT1017IS8#TRPBF IC COMPARATOR MICRPWR DUAL 8SOIC
相关代理商/技术参数
参数描述
LMK04010BISQX 制造商:NSC 制造商全称:National Semiconductor 功能描述:Low-Noise Clock Jitter Cleaner with Cascaded PLLs
LMK04010BISQX/NOPB 功能描述:时钟合成器/抖动清除器 RoHS:否 制造商:Skyworks Solutions, Inc. 输出端数量: 输出电平: 最大输出频率: 输入电平: 最大输入频率:6.1 GHz 电源电压-最大:3.3 V 电源电压-最小:2.7 V 封装 / 箱体:TSSOP-28 封装:Reel
LMK04011BISQ 制造商:Texas Instruments 功能描述:Clock Conditioner 48-Pin LLP EP T/R
LMK04011BISQ/NOPB 功能描述:时钟合成器/抖动清除器 RoHS:否 制造商:Skyworks Solutions, Inc. 输出端数量: 输出电平: 最大输出频率: 输入电平: 最大输入频率:6.1 GHz 电源电压-最大:3.3 V 电源电压-最小:2.7 V 封装 / 箱体:TSSOP-28 封装:Reel
LMK04011BISQE 制造商:Texas Instruments 功能描述:Clock Conditioner 48-Pin LLP EP T/R 制造商:Texas Instruments 功能描述:PRECISION CLOCK CONDITIONER, 48LLP