参数资料
型号: M38B79FFFP
元件分类: 微控制器/微处理器
英文描述: 8-BIT, FLASH, 4.2 MHz, MICROCONTROLLER, PQFP100
封装: 14 X 20 MM, 0.65 MM PITCH, PLASTIC, QFP-100
文件页数: 50/112页
文件大小: 1862K
代理商: M38B79FFFP
38B7 Group
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
MITSUBISHI MICROCOMPUTERS
39
[Serial I/O2 Control Register] SIO2CON (001D16)
The serial I/O2 control register contains eight control bits for serial
I/O2 functions.
[UART Control Register] UARTCON (003816)
This is a 7 bit register containing four control bits, of which four
bits are valid when UART is selected, and of which three bits are
always valid.
Data format of serial data receive/transfer and the output structure
of the P65/TxD pin and others are set by this register.
[Serial I/O2 Status Register] SIO2STS (001E16)
The read-only serial I/O2 status register consists of seven flags
(b0 to b6) which indicate the operating status of the serial I/O2
function and various errors. Three of the flags (b4 to b6) are only
valid in the UART mode. The receive buffer full flag (b1) is cleared
to “0” when the receive buffer is read.
The error detection is performed at the same time data is trans-
ferred from the receive shift register to the receive buffer register,
and the receive buffer full flag is set. A writing to the serial I/O2
status register clears error flags OE, PE, FE, and SE (b3 to b6, re-
spectively). Writing “0” to the serial I/O2 enable bit (SIOE : b7 of
the serial I/O2 control register) also clears all the status flags, in-
cluding the error flags.
All bits of the serial I/O2 status register are initialized to “0” at re-
set, but if the transmit enable bit (b4) of the serial I/O2 control
register has been set to “1”, the transmit shift register shift comple-
tion flag (b2) and the transmit buffer empty flag (b0) become “1”.
[Serial I/O2 Transmit Buffer Register/Receive
Buffer Register] TB/RB (001F16)
The transmit buffer and the receive buffer are located in the same
address. The transmit buffer is write-only and the receive buffer is
read-only. If a character bit length is 7 bits, the MSB of data stored
in the receive buffer is “0”.
[Baud Rate Generator] BRG (003716)
The baud rate generator determines the baud rate for serial trans-
fer. With the 8-bit counter having a reload register, the baud rate
generator divides the frequency of the count source by 1/(n+1),
where n is the value written to the baud rate generator.
相关PDF资料
PDF描述
MB96F346YWAXXXPMC-GSE2 16-BIT, FLASH, 56 MHz, RISC MICROCONTROLLER, PQFP100
M30221M8-XXXFP 16-BIT, MROM, 10 MHz, MICROCONTROLLER, PQFP120
M37470M4-XXXSP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PDIP32
M37478E8SS 8-BIT, OTPROM, 8 MHz, MICROCONTROLLER, CDIP42
MB90F343CESPF MICROCONTROLLER, PQFP100
相关代理商/技术参数
参数描述
M38B79MFA053 制造商:Panasonic Industrial Company 功能描述:SUB ONLY IC
M38C13E6FP 功能描述:IC 740 MCU OTP 24K 64LQFP RoHS:否 类别:集成电路 (IC) >> 嵌入式 - 微控制器, 系列:740/38000 产品培训模块:MCU Product Line Introduction XMEGA Introduction AVR XMEGA USB Connectivity 标准包装:90 系列:AVR® XMEGA 核心处理器:AVR 芯体尺寸:8/16-位 速度:32MHz 连通性:I²C,IrDA,SPI,UART/USART 外围设备:欠压检测/复位,DMA,POR,PWM,WDT 输入/输出数:50 程序存储器容量:192KB(96K x 16) 程序存储器类型:闪存 EEPROM 大小:4K x 8 RAM 容量:16K x 8 电压 - 电源 (Vcc/Vdd):1.6 V ~ 3.6 V 数据转换器:A/D 16x12b; D/A 2x12b 振荡器型:内部 工作温度:-40°C ~ 85°C 封装/外壳:64-TQFP 包装:托盘 配用:ATSTK600-RC14-ND - STK600 SOCKET/ADAPTER 64TQFPATSTK600-TQFP64-ND - STK600 SOCKET/ADAPTER 64-TQFPATAVRONEKIT-ND - KIT AVR/AVR32 DEBUGGER/PROGRMMRATAVRISP2-ND - PROGRAMMER AVR IN SYSTEM
M38C13E6HP 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M38C13RLFS 制造商:Renesas Electronics Corporation 功能描述:EMULATION MCU/8BIT CMOS EMULATION CHIP - Bulk
M38C24M4-XXXFP 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER